[tor-talk] tor setup on wt3020h with openwrt problem
Oğuz Yarımtepe
oguzyarimtepe at gmail.com
Sun Dec 28 20:13:39 UTC 2014
Hi,
I installed openwrt on wt3020h router. Plugged LAN port to my wireles
modem. Assuming that after installing the tor and setting up config files i
was assuming i will be able to surf through tor. But even dns resolving is
not working when i connected to the openwrt ssid.
What am i doing wrong?
Below is the config files:
http://pastebin.com/b6dMDJyt
Or can read here:
==> config/dhcp <==
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '12h'
option dhcpv6 'server'
option ra 'server'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
config odhcpd 'odhcpd'
option maindhcp '0'
option leasefile '/tmp/hosts/odhcpd'
option leasetrigger '/usr/sbin/odhcpd-update'
# added manually
config dhcp 'transtor'
option start '100'
option leasetime '12h'
option limit '150'
option interface 'transtor'
==> config/dropbear <==
config dropbear
option PasswordAuth 'on'
option Port '22'
config dropbear
option Port '22'
option PasswordAuth 'on'
option RootPasswordAuth 'on'
option GatewayPorts 'off'
==> config/firewall <==
config defaults
option syn_flood 1
option input ACCEPT
option output ACCEPT
option forward REJECT
# Uncomment this line to disable ipv6 rules
# option disable_ipv6 1
config zone
option name lan
list network 'lan'
option input ACCEPT
option output ACCEPT
option forward ACCEPT
config zone
option name wan
list network 'wan'
list network 'wan6'
option input REJECT
option output ACCEPT
option forward REJECT
option masq 1
option mtu_fix 1
config forwarding
option src lan
option dest wan
# We need to accept udp packets on port 68,
# see https://dev.openwrt.org/ticket/4108
config rule
option name Allow-DHCP-Renew
option src wan
option proto udp
option dest_port 68
option target ACCEPT
option family ipv4
# Allow IPv4 ping
config rule
option name Allow-Ping
option src wan
option proto icmp
option icmp_type echo-request
option family ipv4
option target ACCEPT
# Allow DHCPv6 replies
# see https://dev.openwrt.org/ticket/10381
config rule
option name Allow-DHCPv6
option src wan
option proto udp
option src_ip fe80::/10
option src_port 547
option dest_ip fe80::/10
option dest_port 546
option family ipv6
option target ACCEPT
# Allow essential incoming IPv6 ICMP traffic
config rule
option name Allow-ICMPv6-Input
option src wan
option proto icmp
list icmp_type echo-request
list icmp_type echo-reply
list icmp_type destination-unreachable
list icmp_type packet-too-big
list icmp_type time-exceeded
list icmp_type bad-header
list icmp_type unknown-header-type
list icmp_type router-solicitation
list icmp_type neighbour-solicitation
list icmp_type router-advertisement
list icmp_type neighbour-advertisement
option limit 1000/sec
option family ipv6
option target ACCEPT
# Allow essential forwarded IPv6 ICMP traffic
config rule
option name Allow-ICMPv6-Forward
option src wan
option dest *
option proto icmp
list icmp_type echo-request
list icmp_type echo-reply
list icmp_type destination-unreachable
list icmp_type packet-too-big
list icmp_type time-exceeded
list icmp_type bad-header
list icmp_type unknown-header-type
option limit 1000/sec
option family ipv6
option target ACCEPT
# include a file with users custom iptables rules
config include
option path /etc/firewall.user
### EXAMPLE CONFIG SECTIONS
# do not allow a specific ip to access wan
#config rule
# option src lan
# option src_ip 192.168.45.2
# option dest wan
# option proto tcp
# option target REJECT
# block a specific mac on wan
#config rule
# option dest wan
# option src_mac 00:11:22:33:44:66
# option target REJECT
# block incoming ICMP traffic on a zone
#config rule
# option src lan
# option proto ICMP
# option target DROP
# port redirect port coming in on wan to lan
#config redirect
# option src wan
# option src_dport 80
# option dest lan
# option dest_ip 192.168.16.235
# option dest_port 80
# option proto tcp
# port redirect of remapped ssh port (22001) on wan
#config redirect
# option src wan
# option src_dport 22001
# option dest lan
# option dest_port 22
# option proto tcp
# allow IPsec/ESP and ISAKMP passthrough
#config rule
# option src wan
# option dest lan
# option protocol esp
# option target ACCEPT
#config rule
# option src wan
# option dest lan
# option src_port 500
# option dest_port 500
# option proto udp
# option target ACCEPT
### FULL CONFIG SECTIONS
#config rule
# option src lan
# option src_ip 192.168.45.2
# option src_mac 00:11:22:33:44:55
# option src_port 80
# option dest wan
# option dest_ip 194.25.2.129
# option dest_port 120
# option proto tcp
# option target REJECT
#config redirect
# option src lan
# option src_ip 192.168.45.2
# option src_mac 00:11:22:33:44:55
# option src_port 1024
# option src_dport 80
# option dest_ip 194.25.2.129
# option dest_port 120
# option proto tcp
#added manually
#config zone
# option name 'tor'
## option input 'ACCEPT'
# option forward 'REJECT'
# option output 'ACCEPT'
# option network 'tor'
#Allow Tor Bridge incoming for censored users
config rule
option src wan
option proto tcp
option dest_port 443
option target ACCEPT
config zone
option name transtor
option input REJECT
option output ACCEPT
option forward REJECT
option syn_flood 1
option conntrack 1 #this setting is mandatory
# Allow Transparent clients the ability to DHCP an address
# XXX TODO: Audit this to ensure it doesn't leak UDP port 67 to the net!
config rule
option name 'Allow-Tor-DHCP'
option src transtor
option proto udp
option dest_port 67
option target ACCEPT
# Tor transparent-proxy-port (set in /etc/tor/torrc)
config rule
option name 'Allow-Tor-Transparent'
option src transtor
option proto tcp
option dest_port 9040
option target ACCEPT
# Tor DNS-proxy-port (set in /etc/tor/torrc)
config rule
option name 'Allow-Tor-DNS'
option src transtor
option proto udp
option dest_port 9053
option target ACCEPT
==> config/luci <==
config core 'main'
option lang 'auto'
option mediaurlbase '/luci-static/openwrt.org'
option resourcebase '/luci-static/resources'
config extern 'flash_keep'
option uci '/etc/config/'
option dropbear '/etc/dropbear/'
option openvpn '/etc/openvpn/'
option passwd '/etc/passwd'
option opkg '/etc/opkg.conf'
option firewall '/etc/firewall.user'
option uploads '/lib/uci/upload/'
config internal 'languages'
option en 'English'
config internal 'sauth'
option sessionpath '/tmp/luci-sessions'
option sessiontime '3600'
config internal 'ccache'
option enable '1'
config internal 'themes'
option Bootstrap '/luci-static/bootstrap'
==> config/network <==
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd80:0fb3:b4e3::/48'
config interface 'lan'
option ifname 'eth0.1'
option force_link '1'
option macaddr '20:28:18:a0:a8:fe'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
# added manually
# option conntrack '1'
# option delegate '0'
# option dns '192.168.1.1'
## option defaultroute 0
## option peerdns 0
config interface 'wan'
option ifname 'eth0.2'
option force_link '1'
option macaddr '20:28:18:a0:a8:ff'
option proto 'dhcp'
config interface 'wan6'
option ifname 'eth0.2'
option proto 'dhcpv6'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 2 3 4 6t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '0 6t'
# added manually
config interface transtor
option ifname "wlan0"
option proto static
option ipaddr 192.168.2.1
option netmask 255.255.255.0
==> config/system <==
config system
option hostname 'OpenWrt'
option timezone 'UTC'
config timeserver 'ntp'
list server '0.openwrt.pool.ntp.org'
list server '1.openwrt.pool.ntp.org'
list server '2.openwrt.pool.ntp.org'
list server '3.openwrt.pool.ntp.org'
option enabled '1'
option enable_server '0'
config led 'led_power'
option name 'power'
option sysfs 'nexx:blue:power'
option default '0'
==> config/ucitrack <==
config network
option init network
list affects dhcp
list affects radvd
config wireless
list affects network
config firewall
option init firewall
list affects luci-splash
list affects qos
list affects miniupnpd
config olsr
option init olsrd
config dhcp
option init dnsmasq
config dropbear
option init dropbear
config httpd
option init httpd
config fstab
option init fstab
config qos
option init qos
config system
option init led
list affects luci_statistics
config luci_splash
option init luci_splash
config upnpd
option init miniupnpd
config ntpclient
option init ntpclient
config samba
option init samba
config tinyproxy
option init tinyproxy
config 6relayd
option init 6relayd
==> config/uhttpd <==
config uhttpd 'main'
list listen_http '0.0.0.0:80'
list listen_http '[::]:80'
list listen_https '0.0.0.0:443'
list listen_https '[::]:443'
option home '/www'
option rfc1918_filter '1'
option max_requests '3'
option max_connections '100'
option cert '/etc/uhttpd.crt'
option key '/etc/uhttpd.key'
option cgi_prefix '/cgi-bin'
option script_timeout '60'
option network_timeout '30'
option http_keepalive '20'
option tcp_keepalive '1'
option ubus_prefix '/ubus'
config cert 'px5g'
option days '730'
option bits '1024'
option country 'DE'
option state 'Berlin'
option location 'Berlin'
option commonname 'OpenWrt'
==> config/wireless <==
config wifi-device 'radio0'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path '10180000.wmac'
option htmode 'HT20'
config wifi-iface
option device 'radio0'
option network 'transtor'
option mode 'ap'
option encryption 'none'
option ssid 'OnionWRT'
==> config/wireless.bak <==
config wifi-device radio0
option type mac80211
option channel 11
option hwmode 11g
option path '10180000.wmac'
option htmode HT20
config wifi-iface
option device radio0
option network lan
option mode ap
option ssid OpenWrt
option encryption none
I installed tor and running. I can see that the ports 9040 and 9053 is
listened. So will be happy if anyone had such an openwrt experience helps.
--
Oğuz Yarımtepe
http://about.me/oguzy
More information about the tor-talk
mailing list