Soekris VPN-1401, OpenSSL,OpenBSD and TOR

[tor]

Recently I had the chance to obtain a soekris vpn-1401 PCI encryptor 
board, with the following ,

*Specifications:*

    * Hi/fn 7955 security accelerator chip
    * Total system throughput at up to 250 Mbps
    * Compression, LZS and MPPC at 420 to 510 Mbps
    * Encryption, 128/192/256 AES, DES, 3-DES and RC4 at 210 to 460 Mbps
    * Authentication, SHA-1 and MD5 at 325 to 360 Mbps
    * Public Key, RSA, DSA, SSL, IKE and DH, 24 to 70 connections/sec
      using 1024 bit keys
    * Hardware random number generator
    * vpn1401: Low Profile 33/66 Mhz 32 bit PCI 2.3, universal board for
      3.3V and 5V systems
    * vpn1411: 33/66 Mhz Mini-PCI type III form factor
    * Power max 1.8 Watt
    * Operating temperature 0-60 °C

*Software:*

    * OpenBSD fully supported in latest release.
    * FreeBSD fully supported in latest release.
    * Linux support under development, see under support
      <http://www.soekris.com/support.htm>.

I will be using it as a hardware assist for AES encryption , I also 
picked up the mini-PC version the vpn-1411 for use in a mobile
EVDO/wifi router.. yes initially the stompbox but very quickly it will 
be openBSD based instead. Its my aim to have a mobile
EVDO based tor router. As the Soekris board used in the stompbox is a 
486 type chip, the minipci- AES-encryptor seems to be the only way to 
run tor on such a lackluster CPU(it does have other tasks to do you 
know). The above specs would seem to indicate at least AES 
encryption/decryption wont be the bottleneck.

At 68-79.00 US and exportable with a certificate it would seem to be the 
cats meow for speeding up tor on certain platforms.


      a tor operator

ps I will try and get benchmarks as schedules permit. The slashdot IT 
tor hacking article was interesting so I decided to look at running  
amap, nessus and others against location hidden services.onion 
addresses(I happen to be running a few of these :)
and see what information can be elicted from my hidden servers.