[tor-relays] Selecting Exit Addresses

[denny.obreham at a-n-o-n-y-m-e.net]

The second IP is still in "Exit Addresses" with the new configuration ... https://metrics.torproject.org/rs.html#details/3B85067588C3F017D5CCF7D8F65B5881B7D4C97C

torrc:

Address     209.141.39.157
OutboundBindAddress 209.141.39.157
ORPort      9001 IPv4Only

Denny

denny.obreham at a-n-o-n-y-m-e.net wrote ..
> Thanks Marco.
> 
> First, I had to change my ORPort to 9001 with your proposed configuration because
> using 443 caused an error => "Could not bind to 0.0.0.0:443: Address already in
> use. Is Tor already running?"
> Probably because my other Tor instance (hidden service) is using it.
> 
> Now I'm just waiting for the metrics to update to see if everything is as expected.
> 
> Finally, thanks for the help with IPv6 because I cannot get it to work. Somehow
> when I try to check IPv6 availability ( https://community.torproject.org/relay/setup/post-install/
> ), I get "ping6: connect: Network is unreachable". I don't have time to set it
> up right now (I already spent hours last week) so I'll get back to you for that.
> 
> Denny
> 
> lists at for-privacy.net wrote ..
> > Hi denny,
> >
> > > Hi,
> > >
> > > I just activated my first exit relay. (
> > > https://metrics.torproject.org/rs.html#details/3B85067588C3F017D5CCF7D8F65B
> > > 5881B7D4C97C ) I had the following in my torrc (plus some other things):
> >
> > I've answered the rest to the list.
> > If you want to enable IPv6 at Frantech/BuyVM:
> >
> > First create one in Stallion from your given subnet.
> > This is what my /etc/network/interfaces looks like at Frantech
> >
> >
> > # This file describes the network interfaces available on your system
> > # and how to activate them. For more information, see interfaces(5).
> >
> > source /etc/network/interfaces.d/*
> >
> > # The loopback network interface
> > auto lo
> > iface lo inet loopback
> >
> > # The primary network interface
> > allow-hotplug eth0
> > iface eth0 inet static
> > 	address 104.244.73.43/24
> > 	gateway 104.244.73.1
> >         # dns-* options are implemented by the resolvconf package, if installed
> >         dns-nameservers 127.0.0.1 107.189.0.68 107.189.0.69
> >         dns-search for-privacy.net
> >
> > iface eth0 inet6 static
> >         address 2605:6400:0030:f78b::2/64
> >         up  ip -6 route add 2605:6400:0030::1 dev eth0
> >         up  ip -6 route add default via 2605:6400:0030::1
> >         down ip -6 route del default via 2605:6400:0030::1
> >         down ip -6 route del 2605:6400:0030::1 dev eth0
> >         dns-nameservers ::1 IPv6ns1 IPv6ns2
> >
> >
> > --
> > ╰_╯ Ciao Marco!
> >
> > Debian GNU/Linux
> >
> > It's free software and it gives you freedom!