[tor-dev] [RFC] Proposal: A First Take at PoW Over Introduction Circuits
David Goulet
dgoulet at torproject.org
Thu Apr 2 19:30:12 UTC 2020
On 02 Apr (18:54:59), George Kadianakis wrote:
> Hello list,
>
> hope everyone is safe and doing well!
>
> I present you an initial draft of a proposal on PoW-based defences for
> onion services under DoS.
>
> The proposal is not finished yet and it needs tuning and fixing. There
> are many places marked with XXX and TODO around the proposal that should
> be addressed.
>
> The important part is that looking at the numbers it does seem like this
> proposal can work as a concept and serve its intended purpose. The most
> handwavey parts of the proposal right now are [INTRO_QUEUE] and
> [POW_SECURITY] and if this thing fails in the end, it's probably gonna
> be something that slipped over there. Hence, we should polish these
> sections before we proceed with any sort of engineering here.
>
> In any case, I decided to send it to the list even in premature form, so
> that it can serve as a stable point of reference in subsequent
> discussions. It can also be found in my git repo:
> https://github.com/asn-d6/torspec/tree/pow-over-intro
>
> Cheers and stay safe!
>
> ---
>
> Filename: xxx-pow-over-intro-v1
> Title: A First Take at PoW Over Introduction Circuits
> Author: George Kadianakis
> Created: 2 April 2020
> Status: Draft
>
> 0. Abstract
>
> This proposal aims to thwart introduction flooding DoS attacks by introducing
> a dynamic Proof-Of-Work protocol that occurs over introduction circuits.
>
> 1. Motivation
>
> So far our attempts at limiting the impact of introduction flooding DoS
> attacks on onion services has been focused on horizontal scaling with
> Onionbalance, optimizing the CPU usage of Tor and applying congestion control
> using rate limiting. While these measures move the goalpost forward, a core
> problem with onion service DoS is that building rendezvous circuits is a
> costly procedure both for the service and for the network. If we ever hope to
> have truly reachable global onion services, we need to make it harder for
> attackers to overload the service with introduction requests.
>
> This proposal achieves this by allowing onion services to specify an optional
> dynamic proof-of-work scheme that its clients need to participate in if they
> want to get served.
>
> With the right parameters, this proof-of-work scheme acts as a gatekeeper to
> block amplification attacks by attackers while letting legitimate clients
> through.
>
> 1.1. Threat model [THREAT_MODEL]
>
> 1.1.1. Attacker profiles [ATTACKER_MODEL]
>
> This proposal is written to thwart specific attackers. A simple PoW proposal
> cannot defend against all and every DoS attack on the Internet, but there are
> adverary models we can defend against.
>
> Let's start with some adversary profiles:
>
> "The script-kiddie"
>
> The script-kiddie has a single computer and pushes it to its
> limits. Perhaps it also has a VPS and a pwned server. We are talking about
> an attacker with total access to 10 Ghz of CPU and 10 GBs of RAM. We
> consider the total cost for this attacker to be zero $.
>
> "The small botnet"
>
> The small botnet is a bunch of computers lined up to do an introduction
> flooding attack. Assuming 500 medium-range computers, we are talking about
> an attacker with total access to 10 Thz of CPU and 10 TB of RAM. We consider
> the upfront cost for this attacker to be about $400.
>
> "The large botnet"
>
> The large botnet is a serious operation with many thousands of computers
> organized to do this attack. Assuming 100k medium-range computers, we are
> talking about an attacker with total access to 200 Thz of CPU and 200 TB of
> RAM. The upfront cost for this attacker is about $36k.
>
> We hope that this proposal can help us defend against the script-kiddie
> attacker and small botnets. To defend against a large botnet we would need
> more tools in our disposal (see [FUTURE_WORK]).
>
> {XXX: Do the above make sense? What other attackers do we care about? What
> other metrics do we care about? Network speed? I got the botnet costs
> from here [REF_BOTNET] Back up our claims of defence.}
>
> 1.1.2. User profiles [USER_MODEL]
>
> We have attackers and we have users. Here are a few user profiles:
>
> "The standard web user"
>
> This is a standard laptop/desktop user who is trying to browse the
> web. They don't know how these defences work and they don't care to
> configure or tweak them. They are gonna use the default values and if the
> site doesn't load, they are gonna close their browser and be sad at Tor.
> They run a 2Ghz computer with 4GB of RAM.
>
> "The motivated user"
>
> This is a user that really wants to reach their destination. They don't
> care about the journey; they just want to get there. They know what's going
> on; they are willing to tweak the default values and make their computer do
> expensive multi-minute PoW computations to get where they want to be.
>
> "The mobile user"
>
> This is a motivated user on a mobile phone. Even tho they want to read the
> news article, they don't have much leeway on stressing their machine to do
> more computation.
>
> We hope that this proposal will allow the motivated user to always connect
> where they want to connect to, and also give more chances to the other user
> groups to reach the destination.
>
> 1.1.3. The DoS Catch-22 [CATCH22]
>
> This proposal is not perfect and it does not cover all the use cases. Still,
> we think that by covering some use cases and giving reachability to the
> people who really need it, we will severely demotivate the attackers from
> continuing the DoS attacks and hence stop the DoS threat all
> together. Furthermore, by increasing the cost to launch a DoS attack, a big
> class of DoS attackers will disappear from the map, since the expected ROI
> will decrease.
>
> 2. System Overview
>
> 2.1. Tor protocol overview
>
> +----------------------------------+
> | |
> +-------+ INTRO1 +-----------+ INTRO2 +--------+ |
> |Client |-------->|Intro Point|------->| PoW |-----------+ |
> +-------+ +-----------+ |Verifier| | |
> +--------+ | |
> | | |
> | | |
> | +----------v---------+ |
> | |Intro Priority Queue| |
> +---------+--------------------+---+
> | | |
> Rendezvous | | |
> circuits | | |
> v v v
>
>
>
> The proof-of-work scheme specified in this proposal takes place during the
> introduction phase of the onion service protocol. It's an optional mechanism
> that only occurs if the service requires it. It can be enabled and disabled
> either through its torrc or through the control port.
>
> In summary, the following steps are taken for the protocol to complete:
>
> 1) Service encodes PoW parameters in descriptor [DESC_POW]
> 2) Client fetches descriptor and computes PoW [CLIENT_POW]
> 3) Client completes PoW and sends results in INTRO1 cell [INTRO1_POW]
> 4) Service verifies PoW and queues introduction based on PoW effort [SERVICE_VERIFY]
>
> 2.2. Proof-of-work overview
>
> 2.2.1. Primitives
>
> For our proof-of-work scheme we want to minimize the spread of resources
> between a motivated attacker and legitimate clients. This means that we are
> looking to minimize any benefits that GPUs or ACICs can offer to an attacker.
>
> For this reason we chose argon2 [REF_ARGON2] as the hash function for our
> proof-of-work scheme since it's well audited and GPU-resistant and to some
> extend ASIC-resistant as well.
>
> As a password hash function, argon2 by default outputs 32 bytes of hash, and
> takes as primary input a message and a nonce/salt. For the purposes of this
> specification we will define an argon2() function as:
> uint8_t hash_output[32] = argon2(uint8_t *message, uint8_t *nonce)'.
>
> See section [ARGON_PARAMS] for more information on the secondary inputs of
> argon2.
>
> 2.2.2. Dynamic PoW
>
> DoS is a dynamic problem where the attacker's capabilities constantly change,
> and hence we want our proof-of-work system to be dynamic and not stuck with a
> static difficulty setting. Hence, instead of forcing clients to go below a
> static target like in Bitcoin to be successful, we ask clients to "bid" using
> their PoW effort. Effectively, a client gets higher priority the higher
> effort they put into their proof-of-work. This is similar to how
> proof-of-stake works but instead of staking coins, you stake work.
So this means that desktop users will be prioritized over mobile users
basically unless I make my phone use X% of battery?
>
> The benefit here is that legitimate clients who really care about getting
> access can spend a big amount of effort into their PoW computation, which
> should guarantee access to the service given reasonable adversary models. See
> [POW_SECURITY] for more details about these guarantees and tradeoffs.
>
> 3. Protocol specification
>
> 3.1. Service encodes PoW parameters in descriptor [DESC_POW]
>
> This whole protocol starts with the service encoding the PoW parameters in
> the 'encrypted' (inner) part of the v3 descriptor. As follows:
>
> "pow-params" SP type SP seed-b64 SP expiration-time NL
>
> [At most once]
>
> type: The type of PoW system used. We call the one specified here "v1"
>
> seed-b64: A random seed that should be used as the input to the PoW
> hash function. Should be 32 random bytes encoded in base64
> without trailing padding.
>
> expiration-time: A timestamp after which the above seed expires and is
> no longer valid as the input for PoW. It's needed so
> that the size of our replay cache does not grow
> infinitely. It should be set to an hour in the future
> (+- some randomness). {TODO: PARAM_TUNING}
Format is?
>
> {XXX: Expiration time makes us even more susceptible to clock skews, but
> it's needed so that our replay cache refreshes. How to fix this?
> See [CLIENT_BEHAVIOR] for more details.}
Would probably allow some room like +/- 1 or 2 hours ... something like that
unless this would fill our replay cache?
>
> 3.2. Client fetches descriptor and computes PoW [CLIENT_POW]
>
> If a client receives a descriptor with "pow-params", it should assume that
> the service is expecting a PoW input as part of the introduction protocol.
What happens with clients _without_ PoW support? They basically won't be able
to connect I suppose? Or be put in the prio queue at the service at the very
hand with work done = 0 ?
>
> In such cases, the client should have been configured with a specific PoW
> 'target' (which is a 32-byte integer similar to the 'target' of Bitcoin
> [REF_TARGET]). See [POW_SECURITY] for more information of how such a target
> should be set. For the purposes of this section, we will assume that the
> target has been set automatically by Tor, or the user configured it manually.
>
> Now the client parses the descriptor and extracts the PoW parameters. It
> makes sure that the expiration-time has not expired and if it has, it needs
> to fetch a new descriptor.
>
> To complete the PoW the client follows the following logic:
>
> a) Client generates 'nonce' as 32 random bytes.
> b) Client derives 'seed' by decoding 'seed-b64'.
> c) Client computes hash_output = argon2(seed, nonce)
> d) Client interprets hash_output as a 32-byte big-endian integer.
> e) Client checks if int(hash_output) <= target.
> e1) If yes, success! The client uses 'hash_output' as the hash and
> 'nonce' and 'seed' as its inputs.
> e2) If no, fail! The client interprets 'nonce' as a big-endian integer,
> increments it by one, and goes back to step (c).
>
> At the end of the above procedure, the client should have a triplet
> (hash_output, seed, nonce) that can be used as the answer to the PoW
> puzzle. How quickly this happens depends solely on the 'target' parameter.
>
> 3.3. Client sends PoW in INTRO1 cell [INTRO1_POW]
>
> Now that the client has an answer to the puzzle it's time to encode it into
> an INTRODUCE1 cell. To do so the client adds an extension to the encrypted
> portion of the INTRODUCE1 cell by using the EXTENSIONS field (see
> [PROCESS_INTRO2] section in rend-spec-v3.txt). The encrypted portion of the
> INTRODUCE1 cell only gets read by the onion service and is ignored by the
> introduction point.
>
> We propose a new EXT_FIELD_TYPE value:
>
> [01] -- PROOF_OF_WORK
>
> The EXT_FIELD content format is:
>
> POW_VERSION [1 byte]
> POW_SEED [32 bytes]
> POW_NONCE [32 bytes]
> POW_OUTPUT [32 bytes]
>
> where:
>
> POW_VERSION is 1 for the protocol specified in this proposal
> POW_SEED is 'seed' from the section above
> POW_NONCE is 'nonce' from the section above
> POW_OUTPUT is 'hash_output' from the section above
>
> {XXX: do we need POW_VERSION? Perhaps we can use EXT_FIELD_TYPE as version}
I would still keep it for the cost of 1 byte. Reason is that I think
EXT_FIELD_TYPE should denote a "type of extension" and in this case anything
related to PoW is 0x01. Then what comes next, depends on the POW_VERSION.
> {XXX: do we need to encode the SEED? Perhaps we can ommit it since the
> service already knows it. But what happens in cases of desynch, if client
> has diff seed from service?}
Service has no way of notifying back the client that the PoW validation
failed... so the service should just use the seed it has meaning not needed?
> {XXX: Do we need to include the output? Probably not. The service has to
> compute it anyway during verification. What's the use?}
Same reason I would say. The only thing I could see that both the POW_SEED and
POW_OUTPUT would be "useful" is if they could avoid the service doing
validation by just comparing if these params?
>
> This will increase the INTRODUCE1 payload size by 99 bytes since the
> extension type and length is 2 extra bytes, the N_EXTENSIONS field is always
> present and currently set to 0 and the EXT_FIELD is 97 bytes. According to
> ticket #33650, INTRODUCE1 cells currently have more than 200 bytes available.
>
> 3.4. Service verifies PoW and handles the introduction [SERVICE_VERIFY]
>
> When a service receives an INTRODUCE1 with the PROOF_OF_WORK extension, it
> should check its configuration on whether proof-of-work is required to
> complete the introduction. If it's not required, the extension SHOULD BE
> ignored. If it is required, the service follows the procedure detailed in
> this section.
>
> 3.4.1. PoW verification
>
> To verify the client's proof-of-work the service extracts (hash_output,
> seed, nonce) from the INTRODUCE1 cell and MUST do the following steps:
>
> 1) Make sure that the client's seed is identical to the active seed.
> 2) Check the client's nonce for replays (see [REPLAY_PROTECTION] section).
> 3) Verify that 'hash_output =?= argon2(seed, nonce)
So wait, the service also has to do the PoW for each client by computing the
Argon2 hash for each cell? Or am I mis-understanding?
>
> If any of these steps fail the service MUST ignore this introduction request
> and abort the protocol.
>
> If all the steps passed, then the circuit is added to the introduction queue
> as detailed in section [INTRO_QUEUE].
>
> 3.4.1.1. Replay protection [REPLAY_PROTECTION]
>
> The service MUST NOT accept introduction requests with the same (seed, nonce)
> tuple. For this reason a replay protection mechanism must be employed.
>
> The simplest way is to use a simple hash table to check whether a (seed,
> nonce) tuple has been used before for the actiev duration of a
> seed. Depending on how long a seed stays active this might be a viable
> solution with reasonable memory/time overhead.
>
> If there is a worry that we might get too many introductions during the
> lifetime of a seed, we can use a Bloom filter as our replay cache
> mechanism. The probabilistic nature of Bloom filters means that sometimes we
> will flag some connections as replays even if they are not; with this false
> positive probability increasing as the number of entries increase. However,
> with the right parameter tuning this probability should be negligible and
> well handled by clients. {TODO: PARAM_TUNING}
>
> 3.4.2. The Introduction Queue [INTRO_QUEUE]
>
> 3.4.2.1. Adding introductions to the introduction queue
>
> When PoW is enabled and a verified introduction comes through, the service
> instead of jumping straight into rendezvous, queues it and prioritizes it
> based on how much effort was devoted by the client to PoW. This means that
> introduction requests with high effort should be prioritized over those with
> low effort.
>
> To do so, the service maintains an "introduction priority queue" data
> structure. Each element in that priority queue is an introduction request,
> and its priority is the effort put into its PoW:
>
> When a verified introduction comes through, the service interprets the PoW
> hash as a 32-byte big-endian integer 'hash_int' and based on that integer it
> inserts it into the right position of the priority_queue: The smallest
> 'hash_int' goes forward in the queue. If two elements have the same value,
> the older one has priority over the newer one.
> {XXX: Is this operation with 32-bytes integers expensive? How to make cheaper?}
>
> {TODO: PARAM_TUNING: If the priority queue is only ordered based on the
> effort what attacks can happen in various scenarios? Do we want to order on
> time+effort? Which scenarios and attackers should we examine here?}
>
> {TODO: PARAM_TUNING: What's the max size of the queue? How do we trim it? Can we
> use WRED usefully?}
I think you'll be bound by the amount of data a connection inbuf can take
which has an upper bound of 32 cells each read event.
Then tor will have to empty at once the inbuf, queue all INTRODUCE2 cells (at
most 32) in that priority queue and once done, we would process it until we
return to handling the connection inbuf.
In other words, the queue size, with tor's architecture, is bound to the
number of cells upper bound you can get when doing a recv() pass which is 32
cells.
Nevertheless, that limit is weirdly hardcoded in tor so you should definitely
think of a way to upper bound the queue and just drop the rest. A good
starting point would be that 32 cells number?
>
> 3.4.2.2. Handling introductions from the introduction queue [HANDLE_QUEUE]
>
> The service should handle introductions by pulling from the introduction
> queue.
>
> Similar to how our cell scheduler works, the onion service subsystem will
> poll the priority queue every 100ms tick and process the first 20 cells from
> the priority queue (if they exist). The service will perform the rendezvous
> and the rest of the onion service protocol as normal.
>
> With this tempo, we can process 200 introduction cells per second.
As I described above, I think we might want to do something like that for
simplicity at first which is "empty inbuf by priority queuing all INTRODUCE2"
and once done, process them.
Thus, it won't be like the cell scheduler that accumulates until a certain
tick (10msec) and then process it all.
> {XXX: Is this good?}
>
> {TODO: PARAM_TUNING: STRAWMAN: This needs hella tuning. Processing 20 cells
> per 100ms is probably unmaintainable, since each cell is quite expensive:
> doing so involving path selection, crypto and making circuits. We will need
> to profile this procedure and see how we can do this scheduling better.}
With the above, we should be within the same performance as we have right now
since we just deferring the processing of INTRODUCE2 cell after the inbuf is
emptied.
>
> {XXX: This might be a nice place to promote multithreading. Queues and pools
> are nice objects to do multithreading since you can have multiple threads
> pull from the queue, or leave stuff on the queue. Not sure if this should be
> in the proposal tho.}
I would _love_ to but could be too early for that if we consider that we are
still unsure that this defense will be useful or not (according to Mike as a
discussion on IRC).
>
> 4. Attacker strategies [ATTACK_META]
>
> Now that we defined our protocol we need to start tweaking the various
> knobs. But before we can do that, we first need to understand a few
> high-level attacker strategies to see what we are fighting against.
>
> 4.1.1. Total overwhelm strat
>
> Given the way the introduction queue works (see [HANDLE_QUEUE]), a very
> effective strategy for the attacker is to totally overwhelm the queue
> processing by sending more high-effort introductions than the onion service
> can handle at any given tick.
>
> To do so, the attacker would have to send at least 20 high-effort
> introduction cells every 100ms, where high-effort is a PoW which is above the
> estimated level of "the motivated user" (see [USER_MODEL]).
>
> An easier attack for the adversary, is the same strategy but with
> introduction cells that are all above the comfortable level of "the standard
> user" (see [USER_MODEL]). This would block out all standard users and only
> allow motivated users to pass.
>
> {XXX: What other attack strategies we should care about?}
>
> 5. Parameter tuning [POW_SECURITY]
>
> There are various parameters in this system that need to be tuned.
>
> We will first start by tuning the default difficulty of our PoW
> system. That's gonna define an expected time for attackers and clients to
> succeed.
>
> We are then gonna tune the parameters of the argon2 hash function. That will
> define the resources that an attacker needs to spend to overwhelm the onion
> service, the resources that the service needs to spend to verify introduction
> requests, and the resources that legitimate clients need to spend to get to
> the onon service.
>
> 5.1. PoW Difficulty settings
>
> The difficulty setting of our PoW basically dictates how difficult it should
> be to get a success in our PoW system. In classic PoW systems, "success" is
> defined as getting a hash output below the "target". However, since our
> system is dynamic, we define "success" as an abstract high-effort computation.
>
> Even tho our system is dynamic, we still need default difficulty settings
> that will define the metagame. The client and attacker can still aim higher
> or lower, but for UX purposes and for analysis purposes we do need to define
> some difficulties.
>
> We hence created the table (see [REF_TABLE]) below which shows how much time
> a legitimate client with a single machine should expect to burn before they
> get a single success. The x-axis is how many successes we want the attacker
> to be able to do per second: the more successes we allow the adversary, the
> more they can overwhelm our introduction queue. The y-axis is how many
> machines the adversary has in her disposal, ranging from just 5 to 1000.
>
> ===============================================================
> | Expected Time (in seconds) Per Success For One Machine |
> ===========================================================================
> | |
> | Attacker Succeses 1 5 10 20 30 50 |
> | per second |
> | |
> | 5 5 1 0 0 0 0 |
> | 50 50 10 5 2 1 1 |
> | 100 100 20 10 5 3 2 |
> | Attacker 200 200 40 20 10 6 4 |
> | Boxes 300 300 60 30 15 10 6 |
> | 400 400 80 40 20 13 8 |
> | 500 500 100 50 25 16 10 |
> | 1000 1000 200 100 50 33 20 |
> | |
> ============================================================================
>
> Here is how you can read the table above:
>
> - If an adversary has a botnet with 1000 boxes, and we want to limit her to 1
> success per second, then a legitimate client with a single box should be
> expected to spend 1000 seconds getting a single success.
>
> - If an adversary has a botnet with 1000 boxes, and we want to limit her to 5
> successes per second, then a legitimate client with a single box should be
> expected to spend 200 seconds getting a single success.
>
> - If an adversary has a botnet with 500 boxes, and we want to limit her to 5
> successes per second, then a legitimate client with a single box should be
> expected to spend 100 seconds getting a single success.
>
> - If an adversary has access to 50 boxes, and we want to limit her to 5
> successes per second, then a legitimate client with a single box should be
> expected to spend 10 seconds getting a single success.
>
> - If an adversary has access to 5 boxes, and we want to limit her to 5
> successes per second, then a legitimate client with a single box should be
> expected to spend 1 seconds getting a single success.
>
> With the above table we can create some profiles for default values of our
> PoW difficulty. So for example, we can use the last case as the default
> parameter for Tor Browser, and then create three more profiles for more
> expensive cases, scaling up to the first case which could be hardest since
> the client is expected to spend 15 minutes for a single introduction.
>
> {TODO: PARAM_TUNING You can see that this section is completely CPU/memory
> agnostic, and it does not take into account potential optimizations that can
> come from GPU/ASICs. This is intentional so that we don't put more variables
> into this equation right now, but as this proposal moves forward we will need
> to put more concrete values here.}
>
> 5.2. Argon2 parameters [ARGON_PARAMS]
>
> We now need to define the secondary argon2 parameters as defined in
> [REF_ARGON2]. This includes the number of lanes 'h', the memory size 'm', the
> number of iterations 't'. Section 9 of [REF_ARGON2] recommends an approach of
> how to tune these parameters.
>
> To tune these parameters we are looking to *minimize* the verification speed
> of an onion service, while *maximizing* the sparse resources spent by an
> adversary trying to overwhelm the service using [ATTACK_META].
>
> When it comes to verification speed, to verify a single introduction cell the
> service needs to do a single argon2 call: so the service will need to do
> hundreds of those per second as INTRODUCE2 cells arrive. The service will
> have to do this verification step even for very cheap zero-effort PoW
> received, so this has to be a cheap procedure so that it doesn't become a DoS
> vector of each own. Hence each individual argon2 call must be cheap enough to
> be able to be done comfortably and plentifuly by an onion service with a
> single host (or horizontally scaled with Onionbalance).
>
> At the same time, the adversary will have to do thousands of these calls if
> she wants to make high-effort PoW, so it's this assymetry that we are looking
> to exploit here. Right now, the most expensive resource for adversaries is
> the RAM size, and that's why we chose argon2 which is memory-hard.
>
> To minmax this game we will need
>
> {TODO: PARAM_TUNING: I've had a hard time minmaxing this game for
> argon2. Even argon2 invocations with a small memory parameter will take
> multiple milliseconds to run on my machine, and the parameters recommended in
> section 8 of the paper all take many hundreds of milliseconds. This is just
> not practical for our use case, since we want to process hundreds of such PoW
> per second... I also did not manage to find a benchmark of argon2 calls for
> different CPU/GPU/FPGA configurations.}
>
> 5. Client behavior [CLIENT_BEHAVIOR]
>
> This proposal introduces a bunch of new ways where a legitimate client can
> fail to reach the onion service.
>
> Furthermore, there is currently no end-to-end way for the onion service to
> inform the client that the introduction failed. The INTRO_ACK cell is not
> end-to-end (it's from the introduction point to the client) and hence it does
> not allow the service to inform the client that the rendezvous is never gonna
> occur.
>
> Let's examine a few such cases:
>
> 5.1. Timeout issues
>
> Alice can fail to reach the onion service if her introduction request falls
> off the priority queue, or if the priority queue is so big that the
> connection times out.
>
> Is building a new introduction circuit sufficient here? Or do we need to
> build an end-to-end mechanism over the introduction circuit to inform
> her? {XXX}
>
> How should timeout values change here since the priority queue will cause
> bigger delays than usual to rendezvous? Can there be some feedback mechanism
> to inform the client of its queue position or ETA?
I don't see this proposal adding new delays for the rendezvous circuit because
as of now, if you as a client get in the queue the 32th, you will be handled
by the service after 32 cells but if you get in the priority queue the 32th,
same situation.
Only way to inform the client I see would be a ACK from service to IP.
>
> 5.2. Seed expiration issues
>
> As mentioned in [DESC_POW], the expiration timestamp on the PoW seed can
> cause issues with clock skewed clients. Furthermore, even not clock skewed
> clients can encounter TOCTOU-style race conditions here.
>
> How should this be handled? Should we have multiple active seeds at the same
> time similar to how we have overlapping descriptors and time periods in v3?
> This would solve the problem but it grows the complexity of the system
> substantially. {XXX}
>
> 5.3. Other descriptor issues
>
> Another race condition here is if the service enables PoW, while a client has
> a cached descriptor. How will the client notice that PoW is needed? Does it
> need to fetch a new descriptor? Should there be another feedback mechanism?
> {XXX}
I assume current behavior would kick in that is failing to introduce, ditch
descriptor, refetch and succeed.
Without a feedback from the service, not much we can do there :S.
>
> 5. Discussion
>
> 5.1. UX
>
> This proposal has user facing UX consequences. Here are a few UX approaches
> with increasing engineering difficulty:
>
> a) Tor Browser needs a "range field" which the user can use to specify how
> much effort they want to spend in PoW if this ever occurs while they are
> browsing. The ranges could be from "Easy" to "Difficult", or we could try
> to estimate time using an average computer. This setting is in the Tor
> Browser settings and users need to find it.
>
> b) We start with a default effort setting, and then we use the new onion
> errors (see #19251) to estimate when an onion service connection has
> failed because of DoS, and only then we present the user a "range field"
> which they can set dynamically. Detecting when an onion service connection
> has failed because of DoS can be hard because of the lack of feedback (see
> [CLIENT_BEHAVIOR])
>
> c) We start with a default effort setting, and if things fail we
> automatically try to figure out an effort setting that will work for the
> user by doing some trial-and-error connections with different effort
> values. Until the connection succeeds we present a "Service is
> overwhelmed, please wait" message to the user.
>
> For this proposal to work initially we need at least (a), and then we can
> start thinking of how far we want to take it.
This is not a simple concept for non technical users. A default value will be
used 99.9% of the time so I would strongly consider making it hard on
ourselves to find a good value instead of the other way. And possibly never
exposing that "range of effort" to the user, could be done all under the hood.
>
> 5.2. Future directions [FUTURE_WORK]
>
> This is just the beginning in DoS defences for Tor and there are various
> future avenues that we can investigate. Here is a brief summary of these:
>
> "More advanced PoW schemes" -- We could use more advanced memory-hard PoW
> schemes like MTP-argon2 or Itsuku to make it even harder for
> adversaries to create successful PoWs. Unfortunately these schemes
> have much bigger proof sizes, and they won't fit in INTRODUCE1 cells.
> See #31223 for more details.
>
> "Third-party anonymous credentials" -- We can use anonymous credentials and a
> third-party token issuance server on the clearnet to issue tokens
> based on PoW or CAPTCHA and then use those tokens to get access to the
> service. See [REF_CREDS] for more details.
>
> "PoW + Anonymous Credentials" -- We can make a hybrid of the above ideas
> where we present a hard puzzle to the user when connecting to the
> onion service, and if they solve it we then give the user a bunch of
> anonymous tokens that can be used in the future. This can all happen
> between the client and the service without a need for a third party.
>
> All of the above approaches are much more complicated than this proposal, and
> hence we want to start easy before we get into more serious projects.
>
> 5.3. Environment
>
> We love the environment! We are concerned of how PoW schemes can waste energy
> by doing useless hash iterations. Here is a few reasons we still decided to
> pursue a PoW approach here:
>
> "We are not making things worse" -- DoS attacks are already happening and
> attackers are already burning energy to carry them out both on the
> attacker side, on the service side and on the network side. We think that
> asking legitimate clients to carry out PoW computations is not gonna
> affect the equation too much, since an attacker right now can very
> quickly cause the same damage that hundreds of legitimate clients do a
> whole day.
>
> "We hope to make things better" -- The hope is that proposals like this will
> make the DoS actors go away and hence the PoW system will not be used. As
> long as DoS is happening there will be a waste of energy, but if we
> manage to demotivate them with technical means, the network as a whole
> will less wasteful. Also see [CATCH22] for a similar argument.
>
> 6. References
>
> [REF_ARGON2]: https://github.com/P-H-C/phc-winner-argon2/blob/master/argon2-specs.pdf
> https://password-hashing.net/#argon2
> [REF_TABLE]: The table is based on the script below plus some manual editing for readability:
> https://gist.github.com/asn-d6/99a936b0467b0cef88a677baaf0bbd04
> [REF_BOTNET]: https://media.kasperskycontenthub.com/wp-content/uploads/sites/43/2009/07/01121538/ynam_botnets_0907_en.pdf
> [REF_CREDS]: https://lists.torproject.org/pipermail/tor-dev/2020-March/014198.html
> [REF_TARGET]: https://en.bitcoin.it/wiki/Target
Good stuff asn!!!
Cheers!
David
--
7LuDL5uwrIIBSORTZgBkxR0ZGg82VNEKb+JshW/Q9ig=
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.torproject.org/pipermail/tor-dev/attachments/20200402/e440e381/attachment-0001.sig>
More information about the tor-dev
mailing list