[tor-commits] [torsocks/master] Remove unused and old files
dgoulet at torproject.org
dgoulet at torproject.org
Fri Apr 4 22:40:26 UTC 2014
commit 80c697386be45c0ad1d340d312fc65154455d7f6
Author: David Goulet <dgoulet at ev0ke.net>
Date: Sat Aug 24 14:07:25 2013 -0400
Remove unused and old files
Signed-off-by: David Goulet <dgoulet at ev0ke.net>
---
doc/patches/README | 88 -
doc/patches/README.TORDNS | 187 -
doc/patches/compilewarnings.patch | 739 ---
doc/patches/conffile.patch | 11 -
doc/patches/getaddrbyhost.patch | 696 ---
doc/patches/getpeername.patch | 350 --
doc/patches/infiniteloop.patch | 20 -
doc/patches/localaddresses.patch | 15 -
doc/patches/tordns.patch |11004 -------------------------------------
doc/socks/SOCKS4.protocol | 150 -
doc/tsocks.conf.complex.example | 47 -
doc/tsocks.conf.simple.example | 16 -
doc/usewithtor.1 | 57 -
13 files changed, 13380 deletions(-)
diff --git a/doc/patches/README b/doc/patches/README
deleted file mode 100644
index 2f921a9..0000000
--- a/doc/patches/README
+++ /dev/null
@@ -1,88 +0,0 @@
-This is a list of the patches applied to tsocks between it's last
-official release and 15/06/08. All changes applied to the source after
-that date are recorded in the Changelog.
-
-NB: These patches are stored for historical reasons only. I have not
- confirmed that they all apply cleanly to the tsocks source. I do not
- know in what order they should be applied.
-
-File: getaddrbyhost.patch (Robert Hogan)
-Date: 18/06/08
-Description:
-Add support for getaddrbyhost.
-
-File: compilewarnings.patch (Robert Hogan)
-Date: 2007
-Description:
- Suppresses a number of compile warnings. Also introduces reasonable defaults
- for use of Tor.
-
-
-File: getpeername.patch (Peter Palfrader <weasel at debian.org>)
-Date: Sat, 27 Mar 2004 13:20:56 +0100
-Description:
- "If we are not done setting up the connection yet, getpeername() should
- return -1 and ENOTCONN.
-
- This is necessary since some applications, when using non-blocking connect,
- (like ircII) use getpeername() to find out if they are connected already.
-
- This results in races sometimes, where the client sends data to the socket
- before we are done with the socks connection setup. Another solution would
- be to intercept send().
-
- This could be extended to actually set the peername to the peer the
- client application has requested, but not for now.
-
- this patch is almost the same, only it uses state != DONE instead of
- state == CONNECTING to find out when to send ENOTCONN back.
-
- this patch tries to also do continue the socks setup in getpeername(),
- if it isn't done yet."
-
-
-File: infiniteloop.patch (Peter Palfrader <weasel at debian.org>)
-Date: Sat, 20 Mar 2004 11:41:41 +0100
-Description:
- "If the server just disconnects when tsocks expects a reply, tsocks
- will get stuck in an infinite busy loop."
-
-
-File: localaddresses.patch (Roger Dingledine)
-Date: Sat, 01 Apr 2006 18:17:50 -0500
-Description:
- "I just noticed that tsocks hard-codes the 127.0.0.0/8 subnet
- as being "local", meaning it won't ever go through the socks
- proxy.
-
- The Tor controller's mapaddress command can assign virtual addresses
- in the 127/8 space: see section 3.8 of
- http://tor.eff.org/cvs/tor/doc/control-spec.txt
-
- We think this behavior should be allowed. Here's a patch to tsocks to
- make it not always hard-code its local network."
-
-
-File: conffile.patch ( Roderick Schertler <roderick at argon.org>)
-Date: Fri, 03 Jun 2005 08:43:59 -0400
-Description: tsocks(8) says TSOCKS_CONFFILE but should say TSOCKS_CONF_FILE
-Details:
- "The tsocks(8) man page says TSOCKS_CONFFILE but should say
- TSOCKS_CONF_FILE. Though this is a documentation error I don't think
- it qualifies as minor. For me the program didn't work at all because
- I needed to run it with an alternative config file, and I needed to
- download the source to figure out the problem."
-
-
-File: tordns.patch (Total Information Security)
-Date: 2005-10-XX (?)
-Original Reference: http://www.totalinfosecurity.com/patches/tor.php
-Description:
- "Patch from Total Information Security to resolve the DNS leakage problem
- and allow access to addresses with nonstandard hostnames (e.g. those ending
- in .onion)."
-
-Notes:
- 'Total Information Security' appears to be defunct so the original link for
- the patch is now dead. The patch stored here was taken from :
- https://bugs.gentoo.org/show_bug.cgi?id=148550
diff --git a/doc/patches/README.TORDNS b/doc/patches/README.TORDNS
deleted file mode 100644
index 0b7dafd..0000000
--- a/doc/patches/README.TORDNS
+++ /dev/null
@@ -1,187 +0,0 @@
-
-TORDNS
-======
-
-What is it?
------------
-
-This patch modifies the tsocks library to use SOCKS for name resolution.
-
-
-Why should I use it?
---------------------
-
-* It's easier.
-
-When using this patch you don't (always..) need to run 'tor-resolve' when
-using 'torify' anymore. Also, 'torify' now works directly with SSH without
-the need for connect scripts or other fiddling. [As long as SSH is not
-installed suid root].
-
-* It allows you to use programs which are not SOCKS aware to connect to
-.onion sites.
-
-For example, you can ssh directly to a .onion site, or use telnet / netcat
-without hassle.
-
-
-QUICK: what do I need to do to make it work?
---------------------------------------------
-
-Configuration instructions:
-
-1) Get the sources
-
-wget http://ftp1.sourceforge.net/tsocks/tsocks-1.8beta5.tar.gz
-wget http://www.totalinfosecurity.com/patches/tor-tsocks/tordns-1.8b5.patch
-
-2) Unpack and apply the tsocks patch
-
-tar xzvf tsocks-1.8beta5.tar.gz
-cd tsocks-1.8
-patch -p1 < ../tordns-1.8b5.patch
-
-3) Configure, compile and install
-
-NOTE: The default 'configure' settings for tsocks have been changed by
-this patch. The --disable-hostnames option (don't try to use DNS to look
-up SOCKS servers) is now enabled by default. Also, tordns is enabled
-by default.
-
-./configure
-make
-make install
-
-All the tordns config options have sane default values which you should
-not need to change.
-
-
-Why did I need to use 'tor-resolve' with 'torify' in the first place?
----------------------------------------------------------------------
-
-Because if you run "torify telnet bar.foo.com 31337", for example, then
-you're leaking information about what sites you're visiting to DNS servers.
-
-The tor-resolve utility resolves names through tor using SOCKS, in a way
-that shouldn't compromise your privacy.
-
-
-What won't work with this?
---------------------------
-
-The 'tordns' feature for tsocks only works with applications using the
-standard c library name lookup mechanisms.
-
-Some programs roll their own name lookup functions, for example, 'curl'
-uses the 'adns' library, not the standard c library name lookup calls.
-In this case, you'll still be leaking DNS requests.
-
-However, it seems that most programs which go to the trouble of implementing
-asynchronous DNS requests or doing other tricky things have native SOCKS or
-HTTP proxy support.
-
-Requests for reverse name lookups are not intercepted.
-
-Finally, the tsocks library is NOT thread-safe, with or without this patch.
-You should not 'torify' multithreaded applications.
-
-
-How does it work?
------------------
-
-This patch adds interceptors for common name resolution calls to tsocks.
-Specifically, the 'gethostbyname', 'getaddrinfo' and 'getipnodebyname' library
-functions. (gethostbyname_r is not supported).
-
-When a call to one of these functions is intercepted, a SOCKS4A resolve
-request is used to retrieve the relevant information, and the results are
-cached.
-
-When the application calls 'connect', the cache is consulted and instead
-of making a SOCKS5 request and supplying the IP address, we connect using
-the name. This prevents those messages in the tor logs which look like:
-
- Sep 23 10:12:20.901 [warn] fetch_from_buf_socks(): Your application (using s
- ocks5 on port 80) is giving Tor only an IP address. Applications that do DNS
- resolves themselves may leak information. Consider using Socks4A (e.g. via
- privoxy or socat) instead.
-
-There are special provisions for handling .onion sites. When a program asks
-to resolve a name ending in '.onion', no name lookup is performed. A bogus IP
-address is returned. The range of unused IP addresses to hand out is called the
-"deadpool". This IP address doesn't mean anything in particular, and could be
-considered a cookie associated with the name. When the application eventually
-calls 'connect' with this bogus IP, the cache is consulted and the result is a
-SOCKS5 request which includes the name of the .onion site.
-
-The default deadpool range is '127.0.69.0/255.255.255.0'. NOTE: if a resolve
-request results in an IP from the deadpool range then the response is rejected,
-and it appears to the application that the lookup failed.
-
-The lookup cache is kept in mmap'd memory and shared across fork() calls.
-This is because some programs perform name lookups in a child process and
-then invoke 'connect' in the parent as a kind of "poor man's async DNS".
-
-
-Advanced configuration options
-------------------------------
-
-The following options have been added to the tsocks configuration file:
-
-tordns_enable
-
- The default value is 'true'. If you set it to 'false', tsocks should work
- just like it did without the tordns patch.
-
-
-tordns_deadpool_range
-
- The default value is '127.0.69.0/255.255.255.0'. This specifies what range
- of IP addresses will be handed to the application as "cookies" for .onion
- names. Of course, you should pick a block of addresses which you aren't
- going to ever need to actually connect to.
-
-
-tordns_cache_size
-
- This specifies the number of IP addresses looked up through socks to cache.
- The default value is 256. The default value is 256. Each entry consumes 260
- bytes of memory, so the default adds 66,560 bytes of overhead to each
- 'torified' process. NOTE: if the number of IP addresses in
- tordns_deadpool_range is less than the value specified for tordns_cache_size,
- then the cache will be shrunk to fit the deadpool range. This is to prevent
- duplicate deadpool addresses from ever appearing in the cache.
-
-
-TODO
-----
-
-* Think about how local names get resolved. Is it important? For example,
- if I 'telnet localhost' which using tordns, what should happen? Should
- we search through /etc/hosts ourselves or what?
-
-* What about the isc library calls like res_init and so on? How widely are
- they use? Does this present a more elegant way to implement this stuff?
-
-* Perhaps intercept res_query etc and try to do something appropriate.
-
-* It should be possible to make this thread-safe with --enable-threads.
-
-* validateconf needs to be updated to understand (and show information about)
- the tordns configuration options.
-
-* Perhaps intercept reverse name lookups?
-
-* In fact, one could modify tsocks further to play nicely with tor. For
- example, you could prevent nonlocal UDP traffic from being sent at all,
- and so on.
-
-
-******************************************************
-Questions or comments, please contact:
-Blair Strang (bls at totalinfosecurity.com)
-Caleb Anderson (caleb.anderson at totalinfosecurity.com)
-Carl Purvis (carl.purvis at totalinfosecurity.com)
-
-Total Information Security Ltd.
-http://www.totalinfosecurity.com/
diff --git a/doc/patches/compilewarnings.patch b/doc/patches/compilewarnings.patch
deleted file mode 100644
index 9c93be1..0000000
--- a/doc/patches/compilewarnings.patch
+++ /dev/null
@@ -1,739 +0,0 @@
-Only in /home/robert/Development/tork/src/tsocks/: .#Makefile.in.1.12
-Only in /home/robert/Development/tork/src/tsocks/: .deps
-Only in /home/robert/Development/tork/src/tsocks/: .libs
-Common subdirectories: /backup/robert/Development/torsocks/CVS and /home/robert/Development/tork/src/tsocks/CVS
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/ChangeLog /home/robert/Development/tork/src/tsocks/ChangeLog
---- /backup/robert/Development/torsocks/ChangeLog 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/ChangeLog 2007-09-30 16:13:34.000000000 +0100
-@@ -1,15 +1,5 @@
--version 1.81 - 2006.11.17 ruben at ugr.es
-- Integrated and resolved the conflicts for the following
-- patches:
-- -DNS from totalinfosecurity mentioned below
-- -Infinite Loop from weasel
-- -Getpeername from weasel
-- -Documentation patch from Roderick Schertler
-- -Localhost patch from Roger Dingledine
-- (patches 1, 3, 4, 5 and 7 from
-- http://wiki.noreply.org/noreply/TheOnionRouter/TSocksPatches)
-- Patches 2 and 6 were not applied because I don't have access to
-- osx or bsd and can't test them. (And the bsd patch breaks linux)
-+Renamed for TorK to avoid conflicts with existing tsocks installations.
-+Robert Hogan
-
- version 1.80tordns - 2005.10.4 bls at totalinfosecurity.com
- Intercept gethostbyname() and friends, added --tordns
-Only in /home/robert/Development/tork/src/tsocks/: Makefile
-Only in /home/robert/Development/tork/src/tsocks/: Makefile.am~
-Only in /home/robert/Development/tork/src/tsocks/: Makefile.in~
-Only in /home/robert/Development/tork/src/tsocks/: README
-Only in /home/robert/Development/tork/src/tsocks/: TODO~
-Only in /backup/robert/Development/torsocks: acconfig.h
-Only in /home/robert/Development/tork/src/tsocks/: aclocal
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/common.c /home/robert/Development/tork/src/tsocks/common.c
---- /backup/robert/Development/torsocks/common.c 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/common.c 2008-04-05 22:36:40.000000000 +0100
-@@ -4,7 +4,7 @@
-
- */
-
--#include <config.h>
-+#include <config.h>
- #include <stdio.h>
- #include <netdb.h>
- #include <common.h>
-@@ -15,6 +15,7 @@
- #include <time.h>
- #include <unistd.h>
- #include <arpa/inet.h>
-+#include <sys/types.h>
- #include <netinet/in.h>
-
- /* Globals */
-@@ -37,7 +38,7 @@
- #ifdef HAVE_GETHOSTBYNAME
- if ((new = gethostbyname(host)) == (struct hostent *) 0) {
- #endif
-- return(-1);
-+ return(0);
- #ifdef HAVE_GETHOSTBYNAME
- } else {
- ip = ((struct in_addr *) * new->h_addr_list);
-@@ -47,7 +48,7 @@
- }
- #endif
- } else
-- return(-1);
-+ return(0);
- }
-
- return (hostaddr);
-@@ -99,10 +100,10 @@
- return nbits;
- }
-
--void show_msg(int level, char *fmt, ...) {
-- va_list ap;
-- int saveerr;
-- extern char *progname;
-+void show_msg(int level, const char *fmt, ...) {
-+ va_list ap;
-+ int saveerr;
-+/* extern char *progname; */
- char timestring[20];
- time_t timestamp;
-
-@@ -128,7 +129,7 @@
- fprintf(logfile, "%s ", timestring);
- }
-
-- // fputs(progname, logfile);
-+ /* fputs(progname, logfile); */
-
- if (logstamp) {
- fprintf(logfile, "(%d)", getpid());
-Only in /home/robert/Development/tork/src/tsocks/: common.c~
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/common.h /home/robert/Development/tork/src/tsocks/common.h
---- /backup/robert/Development/torsocks/common.h 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/common.h 2007-11-02 20:23:55.000000000 +0000
-@@ -1,7 +1,7 @@
- /* Common functions provided in common.c */
-
- void set_log_options(int, char *, int);
--void show_msg(int level, char *, ...);
-+void show_msg(int level, const char *, ...);
- int count_netmask_bits(uint32_t mask);
- unsigned int resolve_ip(char *, int, int);
-
-Only in /home/robert/Development/tork/src/tsocks/: common.lo
-Only in /backup/robert/Development/torsocks: config.guess
-Only in /backup/robert/Development/torsocks: config.h.in
-Only in /backup/robert/Development/torsocks: config.status
-Only in /backup/robert/Development/torsocks: config.sub
-Only in /backup/robert/Development/torsocks: configure.in
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/dead_pool.c /home/robert/Development/tork/src/tsocks/dead_pool.c
---- /backup/robert/Development/torsocks/dead_pool.c 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/dead_pool.c 2008-04-05 22:35:46.000000000 +0100
-@@ -1,5 +1,6 @@
- #include <stdio.h>
- #include <sys/socket.h>
-+#include <sys/types.h>
- #include <netinet/in.h>
- #include <arpa/inet.h>
- #include <netdb.h>
-@@ -29,10 +30,11 @@
- }
-
- dead_pool *
--init_pool(int pool_size, struct in_addr deadrange_base,
-+init_pool(unsigned int pool_size, struct in_addr deadrange_base,
- struct in_addr deadrange_mask, char *sockshost, uint16_t socksport)
- {
-- int i, deadrange_bits, deadrange_width, deadrange_size;
-+ unsigned int i, deadrange_size, deadrange_width;
-+ int deadrange_bits;
- struct in_addr socks_server;
- dead_pool *newpool = NULL;
-
-@@ -182,7 +184,7 @@
- int
- search_pool_for_name(dead_pool *pool, const char *name)
- {
-- int i;
-+ unsigned int i;
- for(i=0; i < pool->n_entries; i++){
- if(strcmp(name, pool->entries[i].name) == 0){
- return i;
-@@ -194,7 +196,7 @@
- char *
- get_pool_entry(dead_pool *pool, struct in_addr *addr)
- {
-- int i;
-+ unsigned int i;
- uint32_t intaddr = addr->s_addr;
-
- if(pool == NULL) {
-Only in /home/robert/Development/tork/src/tsocks/: dead_pool.c~
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/dead_pool.h /home/robert/Development/tork/src/tsocks/dead_pool.h
---- /backup/robert/Development/torsocks/dead_pool.h 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/dead_pool.h 2007-11-02 20:59:58.000000000 +0000
-@@ -1,7 +1,7 @@
- #ifndef _DEAD_POOL_H
- #define _DEAD_POOL_H
-
--#include <config.h>
-+#include <config.h>
-
- extern int (*realconnect)(CONNECT_SIGNATURE);
- extern int (*realclose)(CLOSE_SIGNATURE);
-@@ -16,7 +16,7 @@
-
- struct struct_dead_pool {
- pool_ent *entries; /* Points to array of pool entries */
-- int n_entries; /* Number of entries in the deadpool */
-+ unsigned int n_entries; /* Number of entries in the deadpool */
- unsigned int deadrange_base; /* Deadrange start IP in host byte order */
- unsigned int deadrange_mask; /* Deadrange netmask in host byte order */
- unsigned int deadrange_size; /* Number of IPs in the deadrange */
-@@ -29,7 +29,7 @@
-
- typedef struct struct_dead_pool dead_pool;
-
--dead_pool *init_pool(int deadpool_size, struct in_addr deadrange_base,
-+dead_pool *init_pool(unsigned int deadpool_size, struct in_addr deadrange_base,
- struct in_addr deadrange_mask, char *sockshost, uint16_t socksport);
- int is_dead_address(dead_pool *pool, uint32_t addr);
- char *get_pool_entry(dead_pool *pool, struct in_addr *addr);
-Only in /home/robert/Development/tork/src/tsocks/: dead_pool.lo
-Only in /home/robert/Development/tork/src/tsocks/: getpeername.patch
-Only in /home/robert/Development/tork/src/tsocks/: infiniteloop.patch
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/inspectsocks.c /home/robert/Development/tork/src/tsocks/inspectsocks.c
---- /backup/robert/Development/torsocks/inspectsocks.c 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/inspectsocks.c 2008-04-05 22:36:40.000000000 +0100
-@@ -23,11 +23,11 @@
- */
-
- /* Global configuration variables */
--char *progname = "inspectsocks"; /* Name for error msgs */
-+const char *progname = "inspectsocks"; /* Name for error msgs */
- int defaultport = 1080; /* Default SOCKS port */
-
- /* Header Files */
--#include <config.h>
-+#include <config.h>
- #include <stdio.h>
- #include <stdlib.h>
- #include <unistd.h>
-@@ -35,6 +35,7 @@
- #include <sys/socket.h>
- #include <string.h>
- #include <strings.h>
-+#include <sys/types.h>
- #include <netinet/in.h>
- #include <arpa/inet.h>
- #include <errno.h>
-@@ -44,7 +45,7 @@
- int reqlen, void *rep, int replen);
-
- int main(int argc, char *argv[]) {
-- char *usage = "Usage: <socks server name/ip> [portno]";
-+ const char *usage = "Usage: <socks server name/ip> [portno]";
- char req[9];
- char resp[100];
- unsigned short int portno = defaultport;
-@@ -68,7 +69,7 @@
- }
- case 2:
- if ((server.sin_addr.s_addr = resolve_ip(argv[1], 1,HOSTNAMES))
-- == -1) {
-+ == 0) {
- show_msg(MSGERR, "Invalid IP/host specified (%s)\n", argv[1]);
- show_msg(MSGERR, "%s\n", usage);
- exit(1);
-Only in /home/robert/Development/tork/src/tsocks/: inspectsocks.c~
-Only in /home/robert/Development/tork/src/tsocks/: libtorksocks.la
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/parser.c /home/robert/Development/tork/src/tsocks/parser.c
---- /backup/robert/Development/torsocks/parser.c 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/parser.c 2008-04-05 22:25:54.000000000 +0100
-@@ -12,7 +12,7 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <errno.h>
--#include <config.h>
-+#include <config.h>
- #include "common.h"
- #include "parser.h"
-
-@@ -24,15 +24,15 @@
- static int check_server(struct serverent *);
- static int tokenize(char *, int, char *[]);
- static int handle_path(struct parsedfile *, int, int, char *[]);
--static int handle_endpath(struct parsedfile *, int, int, char *[]);
--static int handle_reaches(struct parsedfile *, int, char *);
-+static int handle_endpath(struct parsedfile *, int, int);
-+static int handle_reaches(int, char *);
- static int handle_server(struct parsedfile *, int, char *);
- static int handle_type(struct parsedfile *config, int, char *);
- static int handle_port(struct parsedfile *config, int, char *);
--static int handle_local(struct parsedfile *, int, char *);
-+static int handle_local(struct parsedfile *, int, const char *);
- static int handle_tordns_enabled(struct parsedfile *, int, char *);
--static int handle_tordns_deadpool_range(struct parsedfile *, int, char *);
--static int handle_tordns_cache_size(struct parsedfile *, int, char *);
-+static int handle_tordns_deadpool_range(struct parsedfile *, int, const char *);
-+static int handle_tordns_cache_size(struct parsedfile *, char *);
- static int handle_defuser(struct parsedfile *, int, char *);
- static int handle_defpass(struct parsedfile *, int, char *);
- static int make_netent(char *value, struct netent **ent);
-@@ -54,6 +54,7 @@
- config->tordns_cache_size = 256;
- config->tordns_enabled = 1;
-
-+
- /* If a filename wasn't provided, use the default */
- if (filename == NULL) {
- strncpy(line, CONF_FILE, sizeof(line) - 1);
-@@ -62,15 +63,19 @@
- filename = line;
- }
-
-- /* Read the configuration file */
-+ /* If there is no configuration file use reasonable defaults for Tor */
- if ((conf = fopen(filename, "r")) == NULL) {
- show_msg(MSGERR, "Could not open socks configuration file "
- "(%s), assuming all networks local\n", filename);
-- handle_local(config, 0, "0.0.0.0/0.0.0.0");
-+ memset(&(config->defaultserver), 0x0, sizeof(config->defaultserver));
-+ check_server(&(config->defaultserver));
-+ handle_local(config, 0, "127.0.0.0/255.0.0.0");
-+/* handle_local(config, 0, "0.0.0.0/0.0.0.0");*/
- rc = 1; /* Severe errors reading configuration */
- }
- else {
-- memset(&(config->defaultserver), 0x0, sizeof(config->defaultserver));
-+
-+ memset(&(config->defaultserver), 0x0, sizeof(config->defaultserver));
-
- while (NULL != fgets(line, MAXLINE, conf)) {
- /* This line _SHOULD_ end in \n so we */
-@@ -82,11 +87,8 @@
- }
- fclose(conf);
-
-- if (!config->localnets) {
-- /* Use 127.0.0.1/255.0.0.0 by default */
-- handle_local(config, 0, "127.0.0.0/255.0.0.0");
-- }
--
-+ /* Always add the 127.0.0.1/255.0.0.0 subnet to local */
-+ handle_local(config, 0, "127.0.0.0/255.0.0.0");
-
- /* Check default server */
- check_server(&(config->defaultserver));
-@@ -108,9 +110,14 @@
- /* Check server entries (and establish defaults) */
- static int check_server(struct serverent *server) {
-
-- /* Default to the default SOCKS port */
-+ /* Default to the default Tor Socks port */
- if (server->port == 0) {
-- server->port = 1080;
-+ server->port = 9050;
-+ }
-+
-+ /* Default to a presumably local installation of Tor */
-+ if (server->address == NULL) {
-+ server->address = strdup("127.0.0.1");
- }
-
- /* Default to SOCKS V4 */
-@@ -137,7 +144,7 @@
- /* Set the spare slots to an empty string to simplify */
- /* processing */
- for (i = nowords; i < 10; i++)
-- words[i] = "";
-+ words[i] = NULL;
-
- if (nowords > 0) {
- /* Now this can either be a "path" block starter or */
-@@ -146,7 +153,7 @@
- if (!strcmp(words[0], "path")) {
- handle_path(config, lineno, nowords, words);
- } else if (!strcmp(words[0], "}")) {
-- handle_endpath(config, lineno, nowords, words);
-+ handle_endpath(config, lineno, nowords);
- } else {
- /* Has to be a pair */
- if ((nowords != 3) || (strcmp(words[1], "="))) {
-@@ -154,7 +161,7 @@
- "on line %d in configuration "
- "file, \"%s\"\n", lineno, savedline);
- } else if (!strcmp(words[0], "reaches")) {
-- handle_reaches(config, lineno, words[2]);
-+ handle_reaches(lineno, words[2]);
- } else if (!strcmp(words[0], "server")) {
- handle_server(config, lineno, words[2]);
- } else if (!strcmp(words[0], "server_port")) {
-@@ -172,7 +179,7 @@
- } else if (!strcmp(words[0], "tordns_deadpool_range")) {
- handle_tordns_deadpool_range(config, lineno, words[2]);
- } else if (!strcmp(words[0], "tordns_cache_size")) {
-- handle_tordns_cache_size(config, lineno, words[2]);
-+ handle_tordns_cache_size(config, words[2]);
- } else {
- show_msg(MSGERR, "Invalid pair type (%s) specified "
- "on line %d in configuration file, "
-@@ -244,7 +251,7 @@
- return(0);
- }
-
--static int handle_endpath(struct parsedfile *config, int lineno, int nowords, char *words[]) {
-+static int handle_endpath(struct parsedfile *config, int lineno, int nowords) {
-
- if (nowords != 1) {
- show_msg(MSGERR, "Badly formed path close statement on line "
-@@ -261,7 +268,7 @@
- return(0);
- }
-
--static int handle_reaches(struct parsedfile *config, int lineno, char *value) {
-+static int handle_reaches(int lineno, char *value) {
- int rc;
- struct netent *ent;
-
-@@ -465,7 +472,7 @@
- return 0;
- }
-
--static int handle_tordns_cache_size(struct parsedfile *config, int lineno,
-+static int handle_tordns_cache_size(struct parsedfile *config,
- char *value)
- {
- char *endptr;
-@@ -489,7 +496,7 @@
- }
-
- static int handle_tordns_deadpool_range(struct parsedfile *config, int lineno,
-- char *value)
-+ const char *value)
- {
- int rc;
- struct netent *ent;
-@@ -508,7 +515,7 @@
- return(0);
- }
-
-- rc = make_netent(value, &ent);
-+ rc = make_netent((char *)value, &ent);
- /* This is copied from handle_local and should probably be folded into
- a generic whinge() function or something */
- switch(rc) {
-@@ -559,7 +566,7 @@
- return 0;
- }
-
--static int handle_local(struct parsedfile *config, int lineno, char *value) {
-+static int handle_local(struct parsedfile *config, int lineno, const char *value) {
- int rc;
- struct netent *ent;
-
-@@ -571,7 +578,7 @@
- return(0);
- }
-
-- rc = make_netent(value, &ent);
-+ rc = make_netent((char *)value, &ent);
- switch(rc) {
- case 1:
- show_msg(MSGERR, "Local network specification (%s) is not validly "
-@@ -777,7 +784,7 @@
- /* standard strsep and this function is that this one will */
- /* set *separator to the character separator found if it isn't null */
- char *strsplit(char *separator, char **text, const char *search) {
-- int len;
-+ unsigned int len;
- char *ret;
-
- ret = *text;
-Only in /home/robert/Development/tork/src/tsocks/: parser.c~
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/parser.h /home/robert/Development/tork/src/tsocks/parser.h
---- /backup/robert/Development/torsocks/parser.h 2008-06-15 10:43:02.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/parser.h 2007-11-02 21:00:20.000000000 +0000
-@@ -35,7 +35,7 @@
- struct serverent *paths;
- int tordns_enabled;
- int tordns_failopen;
-- int tordns_cache_size;
-+ unsigned int tordns_cache_size;
- struct netent *tordns_deadpool_range;
- };
-
-Only in /home/robert/Development/tork/src/tsocks/: parser.lo
-Only in /home/robert/Development/tork/src/tsocks/: soname.diff
-Only in /home/robert/Development/tork/src/tsocks/: stamp-h2
-Only in /home/robert/Development/tork/src/tsocks/: tork-tsocks.conf
-Only in /home/robert/Development/tork/src/tsocks/: torkify
-Only in /home/robert/Development/tork/src/tsocks/: torkify.1
-Only in /home/robert/Development/tork/src/tsocks/: torkify.in
-Only in /backup/robert/Development/torsocks: torksock.diff
-Only in /home/robert/Development/tork/src/tsocks/: torksocks
-Only in /home/robert/Development/tork/src/tsocks/: torksocks.1
-Only in /home/robert/Development/tork/src/tsocks/: torksocks.8
-Only in /home/robert/Development/tork/src/tsocks/: torksocks.announce
-Only in /home/robert/Development/tork/src/tsocks/: torksocks.conf.5
-Only in /backup/robert/Development/torsocks: torksocks.diff
-Only in /home/robert/Development/tork/src/tsocks/: torksocks.in
-Only in /home/robert/Development/tork/src/tsocks/: torksocks.in~
-Only in /backup/robert/Development/torsocks: torksocks2.diff
-Only in /backup/robert/Development/torsocks: torksockscols.diff
-Only in /backup/robert/Development/torsocks: tsocks
-Only in /backup/robert/Development/torsocks: tsocks.1
-Only in /backup/robert/Development/torsocks: tsocks.8
-Only in /backup/robert/Development/torsocks: tsocks.announce
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/tsocks.c /home/robert/Development/tork/src/tsocks/tsocks.c
---- /backup/robert/Development/torsocks/tsocks.c 2008-06-15 10:43:01.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/tsocks.c 2008-06-14 20:11:26.000000000 +0100
-@@ -21,14 +21,14 @@
- */
-
- /* PreProcessor Defines */
--#include <config.h>
-+#include <config.h>
-
- #ifdef USE_GNU_SOURCE
- #define _GNU_SOURCE
- #endif
-
- /* Global configuration variables */
--char *progname = "libtsocks"; /* Name used in err msgs */
-+const char *progname = "libtsocks"; /* Name used in err msgs */
-
- /* Header Files */
- #include <stdio.h>
-@@ -39,6 +39,7 @@
- #include <sys/socket.h>
- #include <string.h>
- #include <strings.h>
-+#include <sys/types.h>
- #include <netinet/in.h>
- #include <arpa/inet.h>
- #include <sys/poll.h>
-@@ -76,7 +77,7 @@
- static char *conffile = NULL;
-
- /* Exported Function Prototypes */
--void _init(void);
-+void __attribute__ ((constructor)) tsocks_init(void);
- int connect(CONNECT_SIGNATURE);
- int select(SELECT_SIGNATURE);
- int poll(POLL_SIGNATURE);
-@@ -114,11 +115,11 @@
- static int read_socksv5_connect(struct connreq *conn);
- static int read_socksv5_auth(struct connreq *conn);
- #ifdef USE_TOR_DNS
--static int deadpool_init();
-+static int deadpool_init(void);
- static int send_socksv4a_request(struct connreq *conn, const char *onion_host);
- #endif
-
--void _init(void) {
-+void tsocks_init(void) {
- #ifdef USE_OLD_DLSYM
- void *lib;
- #endif
-@@ -139,50 +140,49 @@
- #ifdef USE_SOCKS_DNS
- realresinit = dlsym(RTLD_NEXT, "res_init");
- #endif
-- #ifdef USE_TOR_DNS
-- realgethostbyname = dlsym(RTLD_NEXT, "gethostbyname");
-- realgetaddrinfo = dlsym(RTLD_NEXT, "getaddrinfo");
-- realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
-- #endif
-+ #ifdef USE_TOR_DNS
-+ realgethostbyname = dlsym(RTLD_NEXT, "gethostbyname");
-+ realgetaddrinfo = dlsym(RTLD_NEXT, "getaddrinfo");
-+ realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
-+ #endif
- #else
- lib = dlopen(LIBCONNECT, RTLD_LAZY);
- realconnect = dlsym(lib, "connect");
- realselect = dlsym(lib, "select");
- realpoll = dlsym(lib, "poll");
-- realgetpeername = dlsym(lib, "getpeername");
- #ifdef USE_SOCKS_DNS
- realresinit = dlsym(lib, "res_init");
- #endif
-- #ifdef USE_TOR_DNS
-- realgethostbyname = dlsym(lib, "gethostbyname");
-- realgetaddrinfo = dlsym(lib, "getaddrinfo");
-- realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
-- #endif
-- dlclose(lib);
-+ #ifdef USE_TOR_DNS
-+ realgethostbyname = dlsym(lib, "gethostbyname");
-+ realgetaddrinfo = dlsym(lib, "getaddrinfo");
-+ realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
-+ #endif
-+ dlclose(lib);
- lib = dlopen(LIBC, RTLD_LAZY);
- realclose = dlsym(lib, "close");
-- dlclose(lib);
-+ dlclose(lib);
- #endif
- #ifdef USE_TOR_DNS
-- /* Unfortunately, we can't do this lazily because otherwise our mmap'd
-- area won't be shared across fork()s. */
-- deadpool_init();
--#endif
--
-+ /* Unfortunately, we can't do this lazily because otherwise our mmap'd
-+ area won't be shared across fork()s. */
-+ deadpool_init();
-+#endif
- }
-
- static int get_environment() {
- static int done = 0;
-+#ifdef ALLOW_MSG_OUTPUT
- int loglevel = MSGERR;
- char *logfile = NULL;
- char *env;
--
-+#endif
- if (done)
- return(0);
-
- /* Determine the logging level */
- #ifndef ALLOW_MSG_OUTPUT
-- set_log_options(-1, stderr, 0);
-+ set_log_options(-1, (char *)stderr, 0);
- #else
- if ((env = getenv("TSOCKS_DEBUG")))
- loglevel = atoi(env);
-@@ -212,7 +212,7 @@
- config = malloc(sizeof(*config));
- if (!config)
- return(0);
-- read_config(conffile, config);
-+ read_config(conffile, config);
- if (config->paths)
- show_msg(MSGDEBUG, "First lineno for first path is %d\n", config->paths->lineno);
-
-@@ -222,14 +222,15 @@
- }
-
- int connect(CONNECT_SIGNATURE) {
-- struct sockaddr_in *connaddr;
-- struct sockaddr_in peer_address;
-- struct sockaddr_in server_address;
-- int gotvalidserver = 0, rc, namelen = sizeof(peer_address);
-- int sock_type = -1;
-- int sock_type_len = sizeof(sock_type);
-- unsigned int res = -1;
-- struct serverent *path;
-+ struct sockaddr_in *connaddr;
-+ struct sockaddr_in peer_address;
-+ struct sockaddr_in server_address;
-+ int gotvalidserver = 0, rc;
-+ unsigned int namelen = sizeof(peer_address);
-+ int sock_type = -1;
-+ unsigned int sock_type_len = sizeof(sock_type);
-+ int res = -1;
-+ struct serverent *path;
- struct connreq *newconn;
-
- get_environment();
-@@ -248,6 +249,14 @@
- getsockopt(__fd, SOL_SOCKET, SO_TYPE,
- (void *) &sock_type, &sock_type_len);
-
-+ show_msg(MSGDEBUG, "sin_family: %i "
-+ "\n",
-+ connaddr->sin_family);
-+
-+ show_msg(MSGDEBUG, "sockopt: %i "
-+ "\n",
-+ sock_type);
-+
- /* If this isn't an INET socket for a TCP stream we can't */
- /* handle it, just call the real connect now */
- if ((connaddr->sin_family != AF_INET) ||
-@@ -564,7 +573,8 @@
-
- int poll(POLL_SIGNATURE) {
- int nevents = 0;
-- int rc = 0, i;
-+ int rc = 0;
-+ unsigned int i;
- int setevents = 0;
- int monitoring = 0;
- struct connreq *conn, *nextconn;
-@@ -1354,7 +1364,7 @@
- #endif
-
- #ifdef USE_TOR_DNS
--static int deadpool_init()
-+static int deadpool_init(void)
- {
- if(!pool) {
- get_environment();
-Only in /home/robert/Development/tork/src/tsocks/: tsocks.c.rej
-Only in /backup/robert/Development/torsocks: tsocks.conf.5
-Only in /home/robert/Development/tork/src/tsocks/: tsocks.c~
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/tsocks.h /home/robert/Development/tork/src/tsocks/tsocks.h
---- /backup/robert/Development/torsocks/tsocks.h 2008-06-15 10:43:01.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/tsocks.h 2007-11-02 20:35:02.000000000 +0000
-@@ -50,8 +50,8 @@
- int selectevents;
-
- /* Buffer for sending and receiving on the socket */
-- int datalen;
-- int datadone;
-+ unsigned int datalen;
-+ unsigned int datadone;
- char buffer[2048];
-
- struct connreq *next;
-Only in /backup/robert/Development/torsocks: tsocks.kdevelop
-Only in /backup/robert/Development/torsocks: tsocks.kdevelop.pcs
-Only in /backup/robert/Development/torsocks: tsocks.kdevses
-Only in /home/robert/Development/tork/src/tsocks/: tsocks.lo
-diff -u -x Makefile.am -x Makefile.in -x configure -x INSTALL -x README.TORDNS -x COPYING -x Changelog -x Doxyfile -x FAQ -x TODO /backup/robert/Development/torsocks/validateconf.c /home/robert/Development/tork/src/tsocks/validateconf.c
---- /backup/robert/Development/torsocks/validateconf.c 2008-06-15 10:43:01.000000000 +0100
-+++ /home/robert/Development/tork/src/tsocks/validateconf.c 2008-04-05 22:36:40.000000000 +0100
-@@ -23,16 +23,17 @@
- */
-
- /* Global configuration variables */
--char *progname = "validateconf"; /* Name for error msgs */
-+const char *progname = "validateconf"; /* Name for error msgs */
-
- /* Header Files */
--#include <config.h>
-+#include <config.h>
- #include <stdio.h>
- #include <stdlib.h>
- #include <unistd.h>
- #include <sys/types.h>
- #include <sys/socket.h>
- #include <string.h>
-+#include <sys/types.h>
- #include <netinet/in.h>
- #include <arpa/inet.h>
- #include <errno.h>
-@@ -44,7 +45,7 @@
- void test_host(struct parsedfile *config, char *);
-
- int main(int argc, char *argv[]) {
-- char *usage = "Usage: [-f conf file] [-t hostname/ip[:port]]";
-+ const char *usage = "Usage: [-f conf file] [-t hostname/ip[:port]]";
- char *filename = NULL;
- char *testhost = NULL;
- struct parsedfile config;
-@@ -103,7 +104,7 @@
- }
-
- /* First resolve the host to an ip */
-- if ((hostaddr.s_addr = resolve_ip(hostname, 0, 1)) == -1) {
-+ if ((hostaddr.s_addr = resolve_ip(hostname, 0, 1)) == 0) {
- fprintf(stderr, "Error: Cannot resolve %s\n", host);
- return;
- } else {
-@@ -187,13 +188,13 @@
- if (server->address != NULL)
- printf("Server: %s (%s)\n", server->address,
- ((res.s_addr = resolve_ip(server->address, 0,
-- HOSTNAMES)) == -1
-+ HOSTNAMES)) == 0
- ? "Invalid!" : inet_ntoa(res)));
- else
- printf("Server: ERROR! None specified\n");
-
- /* Check the server is on a local net */
-- if ((server->address != NULL) && (res.s_addr != -1) &&
-+ if ((server->address != NULL) && (res.s_addr != 0) &&
- (is_local(config, &res)))
- fprintf(stderr, "Error: Server is not on a network "
- "specified as local\n");
-Only in /home/robert/Development/tork/src/tsocks/: validateconf.c~
diff --git a/doc/patches/conffile.patch b/doc/patches/conffile.patch
deleted file mode 100644
index 1dd6491..0000000
--- a/doc/patches/conffile.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- tsocks.8.~1~ 2002-03-16 05:20:51.000000000 -0500
-+++ tsocks.8 2005-06-03 08:37:39.000000000 -0400
-@@ -59,7 +59,7 @@
- variables as follows:
-
- .TP
--.I TSOCKS_CONFFILE
-+.I TSOCKS_CONF_FILE
- This environment variable overrides the default location of the tsocks
- configuration file. This variable is not honored if the program tsocks
- is embedded in is setuid. In addition this environment variable can
diff --git a/doc/patches/getaddrbyhost.patch b/doc/patches/getaddrbyhost.patch
deleted file mode 100644
index 29b2234..0000000
--- a/doc/patches/getaddrbyhost.patch
+++ /dev/null
@@ -1,696 +0,0 @@
-Index: common.c
-===================================================================
-RCS file: /cvsroot/tork/torsocks/common.c,v
-retrieving revision 1.2
-diff -p -U3 -r1.2 common.c
---- common.c 15 Jun 2008 10:01:03 -0000 1.2
-+++ common.c 18 Jun 2008 21:21:34 -0000
-@@ -26,6 +26,52 @@ char logfilename[256]; /* Name of fil
- FILE *logfile = NULL; /* File to which messages should be logged */
- int logstamp = 0; /* Timestamp (and pid stamp) messages */
-
-+
-+/**
-+ * Read a 16-bit value beginning at <b>cp</b>. Equivalent to
-+ * *(uint16_t*)(cp), but will not cause segfaults on platforms that forbid
-+ * unaligned memory access.
-+ */
-+uint16_t
-+get_uint16(const char *cp)
-+{
-+ uint16_t v;
-+ memcpy(&v,cp,2);
-+ return v;
-+}
-+/**
-+ * Read a 32-bit value beginning at <b>cp</b>. Equivalent to
-+ * *(uint32_t*)(cp), but will not cause segfaults on platforms that forbid
-+ * unaligned memory access.
-+ */
-+uint32_t
-+get_uint32(const char *cp)
-+{
-+ uint32_t v;
-+ memcpy(&v,cp,4);
-+ return v;
-+}
-+/**
-+ * Set a 16-bit value beginning at <b>cp</b> to <b>v</b>. Equivalent to
-+ * *(uint16_t)(cp) = v, but will not cause segfaults on platforms that forbid
-+ * unaligned memory access. */
-+void
-+set_uint16(char *cp, uint16_t v)
-+{
-+ memcpy(cp,&v,2);
-+}
-+/**
-+ * Set a 32-bit value beginning at <b>cp</b> to <b>v</b>. Equivalent to
-+ * *(uint32_t)(cp) = v, but will not cause segfaults on platforms that forbid
-+ * unaligned memory access. */
-+void
-+set_uint32(char *cp, uint32_t v)
-+{
-+ memcpy(cp,&v,4);
-+}
-+
-+
-+
- unsigned int resolve_ip(char *host, int showmsg, int allownames) {
- struct hostent *new;
- unsigned int hostaddr;
-Index: dead_pool.c
-===================================================================
-RCS file: /cvsroot/tork/torsocks/dead_pool.c,v
-retrieving revision 1.2
-diff -p -U3 -r1.2 dead_pool.c
---- dead_pool.c 15 Jun 2008 10:02:41 -0000 1.2
-+++ dead_pool.c 18 Jun 2008 21:21:35 -0000
-@@ -15,7 +15,8 @@ void get_next_dead_address(dead_pool *po
-
- static int
- do_resolve(const char *hostname, uint32_t sockshost, uint16_t socksport,
-- uint32_t *result_addr);
-+ uint32_t *result_addr, const void *addr,
-+ int version, int reverse, char **result_hostname);
-
- /* Compares the last strlen(s2) characters of s1 with s2. Returns as for
- strcasecmp. */
-@@ -77,6 +78,8 @@ init_pool(unsigned int pool_size, struct
- return NULL;
- }
-
-+ show_msg(MSGWARN, "init_pool: sockshost %s ", sockshost);
-+
- /* Initialize the dead_pool structure */
- #ifdef HAVE_INET_ATON
- inet_aton(sockshost, &socks_server);
-@@ -139,6 +142,7 @@ store_pool_entry(dead_pool *pool, char *
- int oldpos;
- int rc;
- uint32_t intaddr;
-+ char *result_hostname;
-
- show_msg(MSGDEBUG, "store_pool_entry: storing '%s'\n", hostname);
- show_msg(MSGDEBUG, "store_pool_entry: write pos is: %d\n", pool->write_pos);
-@@ -156,7 +160,9 @@ store_pool_entry(dead_pool *pool, char *
- if(strcasecmpend(hostname, ".onion") == 0) {
- get_next_dead_address(pool, &pool->entries[position].ip);
- } else {
-- rc = do_resolve(hostname, pool->sockshost, pool->socksport, &intaddr);
-+ rc = do_resolve(hostname, pool->sockshost, pool->socksport, &intaddr, 0,
-+ 4 /*SOCKS5*/, 0 /*Reverse*/, &result_hostname);
-+
- if(rc != 0) {
- show_msg(MSGWARN, "failed to resolve: %s\n", hostname);
- return -1;
-@@ -237,7 +243,32 @@ build_socks4a_resolve_request(char **out
- return len;
- }
-
-+static int
-+build_socks5_resolve_ptr_request(char **out, const void *_addr)
-+{
-+ size_t len;
-+ const struct in_addr *addr=_addr;
-+
-+ len = 12;
-+ *out = malloc(len);
-+ (*out)[0] = 5; /* SOCKS version 5 */
-+ (*out)[1] = '\xF1'; /* Command: reverse resolve.
-+ see doc/socks-extensions.txt*/
-+ (*out)[2] = '\x00'; /* RSV */
-+ (*out)[3] = '\x01'; /* ATYP: IP V4 address: X'01' */
-+
-+ set_uint32((*out)+4, addr->s_addr);/*IP*/
-+ set_uint16((*out)+4+4, 0); /* port */
-+
-+// memcpy((*out)+4, &addr.s_addr,4); /*IP*/
-+// memcpy((*out)+4+4, *(uint32_t)0, 2); /* port */
-+
-+ return len;
-+}
-+
- #define RESPONSE_LEN 8
-+#define SOCKS5_LEN 4
-+#define METHODRESPONSE_LEN 2
-
- static int
- parse_socks4a_resolve_response(const char *response, size_t len,
-@@ -272,43 +303,188 @@ parse_socks4a_resolve_response(const cha
- }
-
- static int
-+parse_socks5_resolve_ptr_response(int s,const char *response, size_t len,
-+ uint32_t *result_addr, char ***result_hostname)
-+{
-+ char reply_buf[4];
-+ int r;
-+
-+ len=0;
-+ while (len < SOCKS5_LEN) {
-+ r = recv(s, reply_buf+len, SOCKS5_LEN-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS5 response\n");
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading SOCKS5 response\n");
-+ return -1;
-+ }
-+ len += r;
-+ }
-+
-+ if (reply_buf[0] != 5) {
-+ show_msg(MSGWARN, "Bad SOCKS5 reply version.");
-+ return -1;
-+ }
-+ if (reply_buf[1] != 0) {
-+ show_msg(MSGWARN,"Got status response '%u': SOCKS5 request failed.",
-+ (unsigned)reply_buf[1]);
-+ return -1;
-+ }
-+ if (reply_buf[3] == 1) {
-+ /* IPv4 address */
-+ len=0;
-+ while (len < SOCKS5_LEN) {
-+ r = recv(s, reply_buf+len, SOCKS5_LEN-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS5 response\n");
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading address in SOCKS5 response\n");
-+ return -1;
-+ }
-+ len += r;
-+ }
-+ *result_addr = ntohl(get_uint32(reply_buf));
-+ } else if (reply_buf[3] == 3) {
-+ size_t result_len;
-+ len=0;
-+ while (len < 1) {
-+ r = recv(s, reply_buf+len, 1-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS5 response\n");
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading address length in SOCKS5 response\n");
-+ return -1;
-+ }
-+ len += r;
-+ }
-+ result_len = *(uint8_t*)(reply_buf);
-+ **result_hostname = malloc(result_len+1);
-+ len=0;
-+ while (len < (int) result_len) {
-+ r = recv(s, **result_hostname+len, result_len-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS5 response\n");
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading hostname in SOCKS5 response\n");
-+ return -1;
-+ }
-+ len += r;
-+ }
-+
-+ (**result_hostname)[result_len] = '\0';
-+ }
-+
-+ return 0;
-+}
-+
-+static int
- do_resolve(const char *hostname, uint32_t sockshost, uint16_t socksport,
-- uint32_t *result_addr)
-+ uint32_t *result_addr, const void *addr,
-+ int version, int reverse, char **result_hostname)
- {
- int s;
- struct sockaddr_in socksaddr;
-- char *req, *cp;
-- int r, len;
-+ char *req, *cp=NULL;
-+ int r, len, hslen;
- char response_buf[RESPONSE_LEN];
-+ const char *handshake="\x05\x01\x00";
-
- show_msg(MSGDEBUG, "do_resolve: resolving %s\n", hostname);
-
-+ /* Create SOCKS connection */
- s = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP);
- if (s<0) {
- show_msg(MSGWARN, "do_resolve: problem creating socket\n");
- return -1;
- }
-
-+ /* Connect to SOCKS server */
- memset(&socksaddr, 0, sizeof(socksaddr));
- socksaddr.sin_family = AF_INET;
- socksaddr.sin_port = htons(socksport);
- socksaddr.sin_addr.s_addr = htonl(sockshost);
- if (realconnect(s, (struct sockaddr*)&socksaddr, sizeof(socksaddr))) {
- show_msg(MSGWARN, "do_resolve: error connecting to SOCKS server\n");
-+ realclose(s);
- return -1;
- }
-
-- if ((len = build_socks4a_resolve_request(&req, "", hostname))<0) {
-- show_msg(MSGWARN, "do_resolve: error generating SOCKS request\n");
-- return -1;
-+ /* If a SOCKS5 connection, perform handshake */
-+ if (version == 5) {
-+ char method_buf[2];
-+ hslen=3;
-+ while (hslen) {
-+ r = send(s, handshake, hslen, 0);
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error sending SOCKS5 method list.\n");
-+ realclose(s);
-+ return -1;
-+ }
-+ hslen -= r;
-+ handshake += r;
-+ }
-+
-+ len = 0;
-+ while (len < METHODRESPONSE_LEN) {
-+ r = recv(s, method_buf+len, METHODRESPONSE_LEN-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS response\n");
-+ realclose(s);
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading SOCKS response\n");
-+ realclose(s);
-+ return -1;
-+ }
-+ len += r;
-+ }
-+
-+ if (method_buf[0] != '\x05') {
-+ show_msg(MSGWARN, "Unrecognized socks version: %u",
-+ (unsigned)method_buf[0]);
-+ realclose(s);
-+ return -1;
-+ }
-+ if (method_buf[1] != '\x00') {
-+ show_msg(MSGWARN, "Unrecognized socks authentication method: %u",
-+ (unsigned)method_buf[1]);
-+ realclose(s);
-+ return -1;
-+ }
-+ }
-+
-+ /* Create SOCKS request */
-+ if (reverse) {
-+ if ((len = build_socks5_resolve_ptr_request(&req, addr))<0) {
-+ show_msg(MSGWARN, "do_resolve: error generating reverse SOCKS request\n");
-+ realclose(s);
-+ return -1;
-+ }
-+ }else{
-+ if ((len = build_socks4a_resolve_request(&req, "", hostname))<0) {
-+ show_msg(MSGWARN, "do_resolve: error generating SOCKS request\n");
-+ realclose(s);
-+ return -1;
-+ }
- }
-
-+ /* Send SOCKS request */
- cp = req;
- while (len) {
- r = send(s, cp, len, 0);
- if (r<0) {
- show_msg(MSGWARN, "do_resolve: error sending SOCKS request\n");
- free(req);
-+ realclose(s);
- return -1;
- }
- len -= r;
-@@ -316,26 +492,40 @@ do_resolve(const char *hostname, uint32_
- }
- free(req);
-
-- len = 0;
-- while (len < RESPONSE_LEN) {
-- r = recv(s, response_buf+len, RESPONSE_LEN-len, 0);
-- if (r==0) {
-- show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS response\n");
-+ /* Handle SOCKS Response */
-+ if (reverse) {
-+ if (parse_socks5_resolve_ptr_response(s, response_buf, RESPONSE_LEN,
-+ result_addr, &result_hostname) < 0){
-+ show_msg(MSGWARN, "do_resolve: error parsing SOCKS response\n");
-+ realclose(s);
- return -1;
- }
-- if (r<0) {
-- show_msg(MSGWARN, "do_resolve: error reading SOCKS response\n");
-+ }else{
-+ /* Process SOCKS response */
-+ len = 0;
-+ while (len < RESPONSE_LEN) {
-+ r = recv(s, response_buf+len, RESPONSE_LEN-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS response\n");
-+ realclose(s);
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading SOCKS response\n");
-+ realclose(s);
-+ return -1;
-+ }
-+ len += r;
-+ }
-+ realclose(s);
-+
-+ /* Parse SOCKS response */
-+ if (parse_socks4a_resolve_response(response_buf, RESPONSE_LEN, result_addr) < 0){
-+ show_msg(MSGWARN, "do_resolve: error parsing SOCKS response\n");
- return -1;
- }
-- len += r;
- }
-
-- realclose(s);
--
-- if (parse_socks4a_resolve_response(response_buf, RESPONSE_LEN, result_addr) < 0){
-- show_msg(MSGWARN, "do_resolve: error parsing SOCKS response\n");
-- return -1;
-- }
-
- show_msg(MSGDEBUG, "do_resolve: success\n");
-
-@@ -343,6 +533,53 @@ do_resolve(const char *hostname, uint32_
- }
-
- struct hostent *
-+our_gethostbyaddr(dead_pool *pool, const void *_addr, socklen_t len, int type)
-+{
-+ const struct in_addr *addr=_addr;
-+ static struct hostent he;
-+ uint32_t intaddr=0;
-+ char *result_hostname=NULL;
-+ int rc=0;
-+ static char *addrs[2];
-+ static char *aliases[2];
-+
-+ rc = do_resolve("", pool->sockshost, pool->socksport, &intaddr, addr,
-+ 5 /*SOCKS5*/, 1 /*Reverse*/, &result_hostname);
-+
-+
-+ if(rc != 0) {
-+ show_msg(MSGWARN, "failed to reverse resolve: %s\n",
-+ inet_ntoa(*((struct in_addr *)addr)));
-+ result_hostname=NULL;
-+ addrs[0] = NULL;
-+ addrs[1] = NULL;
-+ }else{
-+ addrs[0] = (char *)addr;
-+ addrs[1] = NULL;
-+ }
-+
-+ if (result_hostname)
-+ he.h_name = result_hostname;
-+ else
-+ he.h_name = inet_ntoa(*((struct in_addr *)addr));
-+
-+// aliases = malloc(sizeof(char *));
-+ aliases[0] = NULL;
-+ aliases[1] = NULL;
-+
-+ he.h_aliases = aliases;
-+ he.h_length = len;
-+ he.h_addrtype = type;
-+ he.h_addr_list = addrs;
-+
-+ show_msg(MSGDEBUG, "our_gethostbyaddr: resolved '%s' to: '%s'\n",
-+ inet_ntoa(*((struct in_addr *)he.h_addr)), result_hostname);
-+
-+ return &he;
-+
-+}
-+
-+struct hostent *
- our_gethostbyname(dead_pool *pool, const char *name)
- {
- int pos;
-Index: inspectsocks.c
-===================================================================
-RCS file: /cvsroot/tork/torsocks/inspectsocks.c,v
-retrieving revision 1.1.1.1
-diff -p -U3 -r1.1.1.1 inspectsocks.c
---- inspectsocks.c 15 Jun 2008 09:43:02 -0000 1.1.1.1
-+++ inspectsocks.c 18 Jun 2008 21:21:35 -0000
-@@ -23,7 +23,7 @@
- */
-
- /* Global configuration variables */
--char *progname = "inspectsocks"; /* Name for error msgs */
-+const char *progname = "inspectsocks"; /* Name for error msgs */
- int defaultport = 1080; /* Default SOCKS port */
-
- /* Header Files */
-@@ -35,6 +35,7 @@ int defaultport = 1080; /* Default
- #include <sys/socket.h>
- #include <string.h>
- #include <strings.h>
-+#include <sys/types.h>
- #include <netinet/in.h>
- #include <arpa/inet.h>
- #include <errno.h>
-@@ -44,7 +45,7 @@ int send_request(struct sockaddr_in *ser
- int reqlen, void *rep, int replen);
-
- int main(int argc, char *argv[]) {
-- char *usage = "Usage: <socks server name/ip> [portno]";
-+ const char *usage = "Usage: <socks server name/ip> [portno]";
- char req[9];
- char resp[100];
- unsigned short int portno = defaultport;
-@@ -68,7 +69,7 @@ int main(int argc, char *argv[]) {
- }
- case 2:
- if ((server.sin_addr.s_addr = resolve_ip(argv[1], 1,HOSTNAMES))
-- == -1) {
-+ == 0) {
- show_msg(MSGERR, "Invalid IP/host specified (%s)\n", argv[1]);
- show_msg(MSGERR, "%s\n", usage);
- exit(1);
-Index: tsocks.c
-===================================================================
-RCS file: /cvsroot/tork/torsocks/tsocks.c,v
-retrieving revision 1.2
-diff -p -U3 -r1.2 tsocks.c
---- tsocks.c 15 Jun 2008 10:06:03 -0000 1.2
-+++ tsocks.c 18 Jun 2008 21:21:37 -0000
-@@ -63,6 +63,7 @@ static int (*realresinit)(void);
- #ifdef USE_TOR_DNS
- static dead_pool *pool = NULL;
- static struct hostent *(*realgethostbyname)(GETHOSTBYNAME_SIGNATURE);
-+static struct hostent *(*realgethostbyaddr)(GETHOSTBYADDR_SIGNATURE);
- int (*realgetaddrinfo)(GETADDRINFO_SIGNATURE);
- static struct hostent *(*realgetipnodebyname)(GETIPNODEBYNAME_SIGNATURE);
- #endif
-@@ -77,7 +78,7 @@ static int suid = 0;
- static char *conffile = NULL;
-
- /* Exported Function Prototypes */
--void __attribute__ ((constructor)) tsocks_init(void);
-+void __attribute__ ((constructor)) _init(void);
- int connect(CONNECT_SIGNATURE);
- int select(SELECT_SIGNATURE);
- int poll(POLL_SIGNATURE);
-@@ -88,6 +89,7 @@ int res_init(void);
- #endif
- #ifdef USE_TOR_DNS
- struct hostent *gethostbyname(GETHOSTBYNAME_SIGNATURE);
-+struct hostent *gethostbyaddr(GETHOSTBYADDR_SIGNATURE);
- int getaddrinfo(GETADDRINFO_SIGNATURE);
- struct hostent *getipnodebyname(GETIPNODEBYNAME_SIGNATURE);
- #endif
-@@ -119,11 +121,12 @@ static int deadpool_init(void);
- static int send_socksv4a_request(struct connreq *conn, const char *onion_host);
- #endif
-
--void tsocks_init(void) {
-+void _init(void) {
- #ifdef USE_OLD_DLSYM
- void *lib;
- #endif
-
-+ show_msg(MSGWARN, "In tsocks_init \n");
- /* We could do all our initialization here, but to be honest */
- /* most programs that are run won't use our services, so */
- /* we do our general initialization on first call */
-@@ -142,6 +145,7 @@ void tsocks_init(void) {
- #endif
- #ifdef USE_TOR_DNS
- realgethostbyname = dlsym(RTLD_NEXT, "gethostbyname");
-+ //realgethostbyaddr = dlsym(RTLD_NEXT, "gethostbyaddr");
- realgetaddrinfo = dlsym(RTLD_NEXT, "getaddrinfo");
- realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
- #endif
-@@ -155,6 +159,7 @@ void tsocks_init(void) {
- #endif
- #ifdef USE_TOR_DNS
- realgethostbyname = dlsym(lib, "gethostbyname");
-+ realgethostbyaddr = dlsym(lib, "gethostbyaddr");
- realgetaddrinfo = dlsym(lib, "getaddrinfo");
- realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
- #endif
-@@ -1100,6 +1105,7 @@ static int send_socksv5_connect(struct c
- conn->datalen = sizeof(constring);
-
- #ifdef USE_TOR_DNS
-+
- show_msg(MSGDEBUG, "send_socksv5_connect: looking for: %s\n",
- inet_ntoa(conn->connaddr.sin_addr));
-
-@@ -1394,6 +1400,15 @@ struct hostent *gethostbyname(GETHOSTBYN
- }
- }
-
-+struct hostent *gethostbyaddr(GETHOSTBYADDR_SIGNATURE)
-+{
-+ if(pool) {
-+ return our_gethostbyaddr(pool, addr, len, type);
-+ } else {
-+ return realgethostbyaddr(addr, len, type);
-+ }
-+}
-+
- int getaddrinfo(GETADDRINFO_SIGNATURE)
- {
- if(pool) {
-Index: common.h
-===================================================================
-RCS file: /cvsroot/tork/torsocks/common.h,v
-retrieving revision 1.2
-diff -p -U3 -r1.2 common.h
---- common.h 15 Jun 2008 10:01:41 -0000 1.2
-+++ common.h 18 Jun 2008 21:21:37 -0000
-@@ -1,4 +1,33 @@
- /* Common functions provided in common.c */
-+/* GCC has several useful attributes. */
-+#if defined(__GNUC__) && __GNUC__ >= 3
-+#define ATTR_NORETURN __attribute__((noreturn))
-+#define ATTR_PURE __attribute__((pure))
-+#define ATTR_CONST __attribute__((const))
-+#define ATTR_MALLOC __attribute__((malloc))
-+#define ATTR_NORETURN __attribute__((noreturn))
-+#define ATTR_NONNULL(x) __attribute__((nonnull x))
-+/** Macro: Evaluates to <b>exp</b> and hints the compiler that the value
-+ * of <b>exp</b> will probably be true. */
-+#define PREDICT_LIKELY(exp) __builtin_expect((exp), 1)
-+/** Macro: Evaluates to <b>exp</b> and hints the compiler that the value
-+ * of <b>exp</b> will probably be false. */
-+#define PREDICT_UNLIKELY(exp) __builtin_expect((exp), 0)
-+#else
-+#define ATTR_NORETURN
-+#define ATTR_PURE
-+#define ATTR_CONST
-+#define ATTR_MALLOC
-+#define ATTR_NORETURN
-+#define ATTR_NONNULL(x)
-+#define PREDICT_LIKELY(exp) (exp)
-+#define PREDICT_UNLIKELY(exp) (exp)
-+#endif
-+
-+uint16_t get_uint16(const char *cp) ATTR_PURE ATTR_NONNULL((1));
-+uint32_t get_uint32(const char *cp) ATTR_PURE ATTR_NONNULL((1));
-+void set_uint16(char *cp, uint16_t v) ATTR_NONNULL((1));
-+void set_uint32(char *cp, uint32_t v) ATTR_NONNULL((1));
-
- void set_log_options(int, char *, int);
- void show_msg(int level, const char *, ...);
-Index: dead_pool.h
-===================================================================
-RCS file: /cvsroot/tork/torsocks/dead_pool.h,v
-retrieving revision 1.2
-diff -p -U3 -r1.2 dead_pool.h
---- dead_pool.h 15 Jun 2008 10:02:53 -0000 1.2
-+++ dead_pool.h 18 Jun 2008 21:21:38 -0000
-@@ -35,6 +35,8 @@ int is_dead_address(dead_pool *pool, uin
- char *get_pool_entry(dead_pool *pool, struct in_addr *addr);
- int search_pool_for_name(dead_pool *pool, const char *name);
- struct hostent *our_gethostbyname(dead_pool *pool, const char *name);
-+struct hostent *our_gethostbyaddr(dead_pool *pool, const void *addr,
-+ socklen_t len, int type);
- int our_getaddrinfo(dead_pool *pool, const char *node, const char *service,
- void *hints, void *res);
- struct hostent *our_getipnodebyname(dead_pool *pool, const char *name,
-Index: parser.h
-===================================================================
-RCS file: /cvsroot/tork/torsocks/parser.h,v
-retrieving revision 1.1.1.1
-diff -p -U3 -r1.1.1.1 parser.h
---- parser.h 15 Jun 2008 09:43:02 -0000 1.1.1.1
-+++ parser.h 18 Jun 2008 21:21:38 -0000
-@@ -35,7 +35,7 @@ struct parsedfile {
- struct serverent *paths;
- int tordns_enabled;
- int tordns_failopen;
-- int tordns_cache_size;
-+ unsigned int tordns_cache_size;
- struct netent *tordns_deadpool_range;
- };
-
-Index: tsocks.h
-===================================================================
-RCS file: /cvsroot/tork/torsocks/tsocks.h,v
-retrieving revision 1.1.1.1
-diff -p -U3 -r1.1.1.1 tsocks.h
---- tsocks.h 15 Jun 2008 09:43:01 -0000 1.1.1.1
-+++ tsocks.h 18 Jun 2008 21:21:38 -0000
-@@ -50,8 +50,8 @@ struct connreq {
- int selectevents;
-
- /* Buffer for sending and receiving on the socket */
-- int datalen;
-- int datadone;
-+ unsigned int datalen;
-+ unsigned int datadone;
- char buffer[2048];
-
- struct connreq *next;
-Index: config.h.in
-===================================================================
-RCS file: /cvsroot/tork/torsocks/config.h.in,v
-retrieving revision 1.1.1.1
-diff -p -U3 -r1.1.1.1 config.h.in
---- config.h.in 15 Jun 2008 09:43:02 -0000 1.1.1.1
-+++ config.h.in 18 Jun 2008 21:21:38 -0000
-@@ -83,6 +83,9 @@ in inspectsocks */
- #undef GETIPNODEBYNAME_SIGNATURE
-
-
-+/* Description */
-+#undef GETHOSTBYADDR_SIGNATURE
-+
- /* Define to 1 if you have the <inttypes.h> header file. */
- #undef HAVE_INTTYPES_H
-
-Index: configure.in
-===================================================================
-RCS file: /cvsroot/tork/torsocks/configure.in,v
-retrieving revision 1.1.1.1
-diff -p -U3 -r1.1.1.1 configure.in
---- configure.in 15 Jun 2008 09:43:00 -0000 1.1.1.1
-+++ configure.in 18 Jun 2008 21:21:38 -0000
-@@ -384,6 +384,10 @@ dnl Emit signature for gethostbyname
- PROTO="const char *name"
- AC_DEFINE_UNQUOTED(GETHOSTBYNAME_SIGNATURE, [${PROTO}])
-
-+dnl Emit signature for gethostbyaddr
-+PROTO="const void *addr, socklen_t len, int type"
-+AC_DEFINE_UNQUOTED(GETHOSTBYADDR_SIGNATURE, [${PROTO}], [Description])
-+
- dnl Emit signature for getaddrinfo
- PROTO="const char *node, const char *service, void *hints, void *res"
- AC_DEFINE_UNQUOTED(GETADDRINFO_SIGNATURE, [${PROTO}])
diff --git a/doc/patches/getpeername.patch b/doc/patches/getpeername.patch
deleted file mode 100644
index f66d133..0000000
--- a/doc/patches/getpeername.patch
+++ /dev/null
@@ -1,350 +0,0 @@
-diff -ur tsocks-1.8beta5.orig/acconfig.h tsocks-1.8beta5.clean/acconfig.h
---- tsocks-1.8beta5.orig/acconfig.h Sat May 18 06:59:38 2002
-+++ tsocks-1.8beta5.clean/acconfig.h Sat Mar 27 11:12:03 2004
-@@ -43,6 +43,9 @@
- /* Prototype and function header for close function */
- #undef CLOSE_SIGNATURE
-
-+/* Prototype and function header for getpeername function */
-+#undef GETPEERNAME_SIGNATURE
-+
- /* Work out which function we have for conversion from string IPs to
- numerical ones */
- #undef HAVE_INET_ADDR
-diff -ur tsocks-1.8beta5.orig/config.h.in tsocks-1.8beta5.clean/config.h.in
---- tsocks-1.8beta5.orig/config.h.in Sat May 18 06:59:42 2002
-+++ tsocks-1.8beta5.clean/config.h.in Sat Mar 27 11:21:58 2004
-@@ -46,6 +46,9 @@
- /* Prototype and function header for close function */
- #undef CLOSE_SIGNATURE
-
-+/* Prototype and function header for close function */
-+#undef GETPEERNAME_SIGNATURE
-+
- /* Work out which function we have for conversion from string IPs to
- numerical ones */
- #undef HAVE_INET_ADDR
-diff -ur tsocks-1.8beta5.orig/config.status tsocks-1.8beta5.clean/config.status
---- tsocks-1.8beta5.orig/config.status Sat Mar 27 11:25:17 2004
-+++ tsocks-1.8beta5.clean/config.status Sat Mar 27 11:22:01 2004
-@@ -2,9 +2,9 @@
- # Generated automatically by configure.
- # Run this file to recreate the current configuration.
- # This directory was configured as follows,
--# on host inky:
-+# on host seppia:
- #
--# ./configure --prefix=/usr --libdir=/usr/lib --mandir=/usr/share/man --with-conf=/etc/tsocks.conf --enable-socksdns --enable-hostnames
-+# ./configure
- #
- # Compiler output produced by configure, useful for debugging
- # configure, is in ./config.log if it exists.
-@@ -14,8 +14,8 @@
- do
- case "$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-- echo "running ${CONFIG_SHELL-/bin/sh} ./configure --prefix=/usr --libdir=/usr/lib --mandir=/usr/share/man --with-conf=/etc/tsocks.conf --enable-socksdns --enable-hostnames --no-create --no-recursion"
-- exec ${CONFIG_SHELL-/bin/sh} ./configure --prefix=/usr --libdir=/usr/lib --mandir=/usr/share/man --with-conf=/etc/tsocks.conf --enable-socksdns --enable-hostnames --no-create --no-recursion ;;
-+ echo "running ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion"
-+ exec ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "./config.status generated by autoconf version 2.13"
- exit 0 ;;
-@@ -53,11 +53,11 @@
- s%@sysconfdir@%${prefix}/etc%g
- s%@sharedstatedir@%${prefix}/com%g
- s%@localstatedir@%${prefix}/var%g
--s%@libdir@%/usr/lib%g
-+s%@libdir@%/lib%g
- s%@includedir@%${prefix}/include%g
- s%@oldincludedir@%/usr/include%g
- s%@infodir@%${prefix}/info%g
--s%@mandir@%/usr/share/man%g
-+s%@mandir@%${prefix}/man%g
- s%@host@%i686-pc-linux-gnu%g
- s%@host_alias@%i686-pc-linux-gnu%g
- s%@host_cpu@%i686%g
-@@ -255,15 +255,15 @@
- mv conftest.out conftest.in
-
- cat > conftest.frag <<CEOF
--${ac_dA}USE_SOCKS_DNS${ac_dB}USE_SOCKS_DNS${ac_dC}1${ac_dD}
--${ac_uA}USE_SOCKS_DNS${ac_uB}USE_SOCKS_DNS${ac_uC}1${ac_uD}
--${ac_eA}USE_SOCKS_DNS${ac_eB}USE_SOCKS_DNS${ac_eC}1${ac_eD}
- ${ac_dA}ALLOW_ENV_CONFIG${ac_dB}ALLOW_ENV_CONFIG${ac_dC}1${ac_dD}
- ${ac_uA}ALLOW_ENV_CONFIG${ac_uB}ALLOW_ENV_CONFIG${ac_uC}1${ac_uD}
- ${ac_eA}ALLOW_ENV_CONFIG${ac_eB}ALLOW_ENV_CONFIG${ac_eC}1${ac_eD}
- ${ac_dA}ALLOW_MSG_OUTPUT${ac_dB}ALLOW_MSG_OUTPUT${ac_dC}1${ac_dD}
- ${ac_uA}ALLOW_MSG_OUTPUT${ac_uB}ALLOW_MSG_OUTPUT${ac_uC}1${ac_uD}
- ${ac_eA}ALLOW_MSG_OUTPUT${ac_eB}ALLOW_MSG_OUTPUT${ac_eC}1${ac_eD}
-+${ac_dA}HOSTNAMES${ac_dB}HOSTNAMES${ac_dC}1${ac_dD}
-+${ac_uA}HOSTNAMES${ac_uB}HOSTNAMES${ac_uC}1${ac_uD}
-+${ac_eA}HOSTNAMES${ac_eB}HOSTNAMES${ac_eC}1${ac_eD}
- ${ac_dA}SELECT_SIGNATURE${ac_dB}SELECT_SIGNATURE${ac_dC}int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout${ac_dD}
- ${ac_uA}SELECT_SIGNATURE${ac_uB}SELECT_SIGNATURE${ac_uC}int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout${ac_uD}
- ${ac_eA}SELECT_SIGNATURE${ac_eB}SELECT_SIGNATURE${ac_eC}int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout${ac_eD}
-@@ -282,15 +282,18 @@
- ${ac_dA}CLOSE_SIGNATURE${ac_dB}CLOSE_SIGNATURE${ac_dC}int fd${ac_dD}
- ${ac_uA}CLOSE_SIGNATURE${ac_uB}CLOSE_SIGNATURE${ac_uC}int fd${ac_uD}
- ${ac_eA}CLOSE_SIGNATURE${ac_eB}CLOSE_SIGNATURE${ac_eC}int fd${ac_eD}
--${ac_dA}POLL_SIGNATURE${ac_dB}POLL_SIGNATURE${ac_dC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_dD}
--${ac_uA}POLL_SIGNATURE${ac_uB}POLL_SIGNATURE${ac_uC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_uD}
--${ac_eA}POLL_SIGNATURE${ac_eB}POLL_SIGNATURE${ac_eC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_eD}
-+${ac_dA}GETPEERNAME_SIGNATURE${ac_dB}GETPEERNAME_SIGNATURE${ac_dC}int __fd, struct sockaddr * __name, socklen_t *__namelen${ac_dD}
-+${ac_uA}GETPEERNAME_SIGNATURE${ac_uB}GETPEERNAME_SIGNATURE${ac_uC}int __fd, struct sockaddr * __name, socklen_t *__namelen${ac_uD}
-+${ac_eA}GETPEERNAME_SIGNATURE${ac_eB}GETPEERNAME_SIGNATURE${ac_eC}int __fd, struct sockaddr * __name, socklen_t *__namelen${ac_eD}
- CEOF
- sed -f conftest.frag conftest.in > conftest.out
- rm -f conftest.in
- mv conftest.out conftest.in
-
- cat > conftest.frag <<CEOF
-+${ac_dA}POLL_SIGNATURE${ac_dB}POLL_SIGNATURE${ac_dC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_dD}
-+${ac_uA}POLL_SIGNATURE${ac_uB}POLL_SIGNATURE${ac_uC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_uD}
-+${ac_eA}POLL_SIGNATURE${ac_eB}POLL_SIGNATURE${ac_eC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_eD}
- s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
- CEOF
- sed -f conftest.frag conftest.in > conftest.out
-diff -ur tsocks-1.8beta5.orig/configure tsocks-1.8beta5.clean/configure
---- tsocks-1.8beta5.orig/configure Tue Jul 16 00:51:08 2002
-+++ tsocks-1.8beta5.clean/configure Sat Mar 27 11:12:05 2004
-@@ -2225,14 +2225,60 @@
- EOF
-
-
-+
-+echo $ac_n "checking for correct getpeername prototype""... $ac_c" 1>&6
-+echo "configure:2231: checking for correct getpeername prototype" >&5
-+PROTO=
-+PROTO1='int __fd, const struct sockaddr * __name, int *__namelen'
-+PROTO2='int __fd, const struct sockaddr_in * __name, socklen_t *__namelen'
-+PROTO3='int __fd, struct sockaddr * __name, socklen_t *__namelen'
-+PROTO4='int __fd, const struct sockaddr * __name, socklen_t *__namelen'
-+for testproto in "${PROTO1}" \
-+ "${PROTO2}" \
-+ "${PROTO3}" \
-+ "${PROTO4}"
-+do
-+ if test "${PROTO}" = ""; then
-+ cat > conftest.$ac_ext <<EOF
-+#line 2244 "configure"
-+#include "confdefs.h"
-+
-+ #include <sys/socket.h>
-+ int getpeername($testproto);
-+
-+int main() {
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:2254: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
-+ PROTO="$testproto";
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+fi
-+rm -f conftest*
-+ fi
-+done
-+if test "${PROTO}" = ""; then
-+ { echo "configure: error: "no match found!"" 1>&2; exit 1; }
-+fi
-+echo "$ac_t""getpeername(${PROTO})" 1>&6
-+cat >> confdefs.h <<EOF
-+#define GETPEERNAME_SIGNATURE ${PROTO}
-+EOF
-+
-+
-+
-+
- echo $ac_n "checking for correct poll prototype""... $ac_c" 1>&6
--echo "configure:2230: checking for correct poll prototype" >&5
-+echo "configure:2276: checking for correct poll prototype" >&5
- PROTO=
- for testproto in 'struct pollfd *ufds, unsigned long nfds, int timeout'
- do
- if test "${PROTO}" = ""; then
- cat > conftest.$ac_ext <<EOF
--#line 2236 "configure"
-+#line 2282 "configure"
- #include "confdefs.h"
-
- #include <sys/poll.h>
-@@ -2242,7 +2288,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:2246: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+if { (eval echo configure:2292: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- PROTO="$testproto";
- else
-diff -ur tsocks-1.8beta5.orig/configure.in tsocks-1.8beta5.clean/configure.in
---- tsocks-1.8beta5.orig/configure.in Tue Jul 16 00:51:03 2002
-+++ tsocks-1.8beta5.clean/configure.in Sat Mar 27 11:11:02 2004
-@@ -309,6 +309,34 @@
- AC_MSG_RESULT([close(${PROTO})])
- AC_DEFINE_UNQUOTED(CLOSE_SIGNATURE, [${PROTO}])
-
-+
-+dnl Find the correct getpeername prototype on this machine
-+AC_MSG_CHECKING(for correct getpeername prototype)
-+PROTO=
-+PROTO1='int __fd, const struct sockaddr * __name, int *__namelen'
-+PROTO2='int __fd, const struct sockaddr_in * __name, socklen_t *__namelen'
-+PROTO3='int __fd, struct sockaddr * __name, socklen_t *__namelen'
-+PROTO4='int __fd, const struct sockaddr * __name, socklen_t *__namelen'
-+for testproto in "${PROTO1}" \
-+ "${PROTO2}" \
-+ "${PROTO3}" \
-+ "${PROTO4}"
-+do
-+ if test "${PROTO}" = ""; then
-+ AC_TRY_COMPILE([
-+ #include <sys/socket.h>
-+ int getpeername($testproto);
-+ ],,[PROTO="$testproto";],)
-+ fi
-+done
-+if test "${PROTO}" = ""; then
-+ AC_MSG_ERROR("no match found!")
-+fi
-+AC_MSG_RESULT([getpeername(${PROTO})])
-+AC_DEFINE_UNQUOTED(GETPEERNAME_SIGNATURE, [${PROTO}])
-+
-+
-+
- dnl Find the correct poll prototype on this machine
- AC_MSG_CHECKING(for correct poll prototype)
- PROTO=
-Only in tsocks-1.8beta5.clean: ld-pre
-Only in tsocks-1.8beta5.clean: sel
-diff -ur tsocks-1.8beta5.orig/tsocks.c tsocks-1.8beta5.clean/tsocks.c
---- tsocks-1.8beta5.orig/tsocks.c Tue Jul 16 00:50:52 2002
-+++ tsocks-1.8beta5.clean/tsocks.c Sat Mar 27 13:17:58 2004
-@@ -62,6 +62,7 @@
- static int (*realselect)(SELECT_SIGNATURE);
- static int (*realpoll)(POLL_SIGNATURE);
- static int (*realclose)(CLOSE_SIGNATURE);
-+static int (*realgetpeername)(GETPEERNAME_SIGNATURE);
- static struct parsedfile *config;
- static struct connreq *requests = NULL;
- static int suid = 0;
-@@ -73,6 +74,7 @@
- int select(SELECT_SIGNATURE);
- int poll(POLL_SIGNATURE);
- int close(CLOSE_SIGNATURE);
-+int getpeername(GETPEERNAME_SIGNATURE);
- #ifdef USE_SOCKS_DNS
- int res_init(void);
- #endif
-@@ -109,14 +111,15 @@
- /* most programs that are run won't use our services, so */
- /* we do our general initialization on first call */
-
-- /* Determine the logging level */
-- suid = (getuid() != geteuid());
-+ /* Determine the logging level */
-+ suid = (getuid() != geteuid());
-
- #ifndef USE_OLD_DLSYM
- realconnect = dlsym(RTLD_NEXT, "connect");
- realselect = dlsym(RTLD_NEXT, "select");
- realpoll = dlsym(RTLD_NEXT, "poll");
- realclose = dlsym(RTLD_NEXT, "close");
-+ realgetpeername = dlsym(RTLD_NEXT, "getpeername");
- #ifdef USE_SOCKS_DNS
- realresinit = dlsym(RTLD_NEXT, "res_init");
- #endif
-@@ -125,14 +128,15 @@
- realconnect = dlsym(lib, "connect");
- realselect = dlsym(lib, "select");
- realpoll = dlsym(lib, "poll");
-+ realgetpeername = dlsym(lib, "getpeername");
- #ifdef USE_SOCKS_DNS
- realresinit = dlsym(lib, "res_init");
- #endif
-- dlclose(lib);
-+ dlclose(lib);
-
- lib = dlopen(LIBC, RTLD_LAZY);
-- realclose = dlsym(lib, "close");
-- dlclose(lib);
-+ realclose = dlsym(lib, "close");
-+ dlclose(lib);
- #endif
- }
-
-@@ -348,8 +352,10 @@
-
- /* If we're not currently managing any requests we can just
- * leave here */
-- if (!requests)
-+ if (!requests) {
-+ show_msg(MSGDEBUG, "No requests waiting, calling real select\n");
- return(realselect(n, readfds, writefds, exceptfds, timeout));
-+ }
-
- get_environment();
-
-@@ -703,6 +709,50 @@
- return(rc);
- }
-
-+/* If we are not done setting up the connection yet, return
-+ * -1 and ENOTCONN, otherwise call getpeername
-+ *
-+ * This is necessary since some applications, when using non-blocking connect,
-+ * (like ircII) use getpeername() to find out if they are connected already.
-+ *
-+ * This results in races sometimes, where the client sends data to the socket
-+ * before we are done with the socks connection setup. Another solution would
-+ * be to intercept send().
-+ *
-+ * This could be extended to actually set the peername to the peer the
-+ * client application has requested, but not for now.
-+ *
-+ * PP, Sat, 27 Mar 2004 11:30:23 +0100
-+ */
-+int getpeername(GETPEERNAME_SIGNATURE) {
-+ struct connreq *conn;
-+ int rc;
-+
-+ if (realgetpeername == NULL) {
-+ show_msg(MSGERR, "Unresolved symbol: getpeername\n");
-+ return(-1);
-+ }
-+
-+ show_msg(MSGDEBUG, "Call to getpeername for fd %d\n", __fd);
-+
-+
-+ rc = realgetpeername(__fd, __name, __namelen);
-+ if (rc == -1)
-+ return rc;
-+
-+ /* Are we handling this connect? */
-+ if ((conn = find_socks_request(__fd, 1))) {
-+ /* While we are at it, we might was well try to do something useful */
-+ handle_request(conn);
-+
-+ if (conn->state != DONE) {
-+ errno = ENOTCONN;
-+ return(-1);
-+ }
-+ }
-+ return rc;
-+}
-+
- static struct connreq *new_socks_request(int sockid, struct sockaddr_in *connaddr,
- struct sockaddr_in *serveraddr,
- struct serverent *path) {
-@@ -852,7 +902,7 @@
- sizeof(conn->serveraddr));
-
- show_msg(MSGDEBUG, "Connect returned %d, errno is %d\n", rc, errno);
-- if (rc) {
-+ if (rc) {
- if (errno != EINPROGRESS) {
- show_msg(MSGERR, "Error %d attempting to connect to SOCKS "
- "server (%s)\n", errno, strerror(errno));
diff --git a/doc/patches/infiniteloop.patch b/doc/patches/infiniteloop.patch
deleted file mode 100644
index 4b0deb9..0000000
--- a/doc/patches/infiniteloop.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- tsocks-1.8.orig/tsocks.c 2002-03-13 14:02:04.000000000 +0100
-+++ tsocks-1.8/tsocks.c 2004-03-20 11:30:57.000000000 +0100
-@@ -951,14 +951,18 @@
- show_msg(MSGDEBUG, "Reading from server (expecting %d bytes)\n", conn->datalen);
- while ((rc == 0) && (conn->datadone != conn->datalen)) {
- rc = recv(conn->sockid, conn->buffer + conn->datadone,
- conn->datalen - conn->datadone, 0);
- if (rc > 0) {
- conn->datadone += rc;
- rc = 0;
-+ } else if (rc == 0) {
-+ show_msg(MSGDEBUG, "Peer has shutdown but we only read %d of %d bytes.\n",
-+ conn->datadone, conn->datalen);
-+ rc = ENOTCONN; /* ENOTCONN seems like the most fitting error message */
- } else {
- if (errno != EWOULDBLOCK)
- show_msg(MSGDEBUG, "Read failed, %s\n", strerror(errno));
- rc = errno;
- }
- }
diff --git a/doc/patches/localaddresses.patch b/doc/patches/localaddresses.patch
deleted file mode 100644
index d69c7e8..0000000
--- a/doc/patches/localaddresses.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- parser.c.old 2006-04-01 17:54:46.687832056 -0500
-+++ parser.c 2006-04-01 17:55:47.552579208 -0500
-@@ -74,8 +74,10 @@
- }
- fclose(conf);
-
-- /* Always add the 127.0.0.1/255.0.0.0 subnet to local */
-- handle_local(config, 0, "127.0.0.0/255.0.0.0");
-+ if (!config->localnets) {
-+ /* Use 127.0.0.1/255.0.0.0 by default */
-+ handle_local(config, 0, "127.0.0.0/255.0.0.0");
-+ }
-
- /* Check default server */
- check_server(&(config->defaultserver));
diff --git a/doc/patches/tordns.patch b/doc/patches/tordns.patch
deleted file mode 100644
index bf8d79b..0000000
--- a/doc/patches/tordns.patch
+++ /dev/null
@@ -1,11004 +0,0 @@
-diff -rN -U 5 tsocks-1.8/acconfig.h tsocks/acconfig.h
---- tsocks-1.8/acconfig.h 2002-05-18 16:59:38.000000000 +1200
-+++ tsocks/acconfig.h 2005-10-01 17:22:09.000000000 +1200
-@@ -51,10 +51,13 @@
- /* We use strsep which isn't on all machines, but we provide our own
- definition of it for those which don't have it, this causes us to define
- our version */
- #undef DEFINE_STRSEP
-
-+/* Should we resolve DNS entries in a way which works well with tor? */
-+#undef USE_TOR_DNS
-+
- /* Allow the use of DNS names in the socks configuration file for socks
- servers. This doesn't work if socksified DNS is enabled for obvious
- reasons, it also introduces overhead, but people seem to want it */
- #define HOSTNAMES 0
-
-@@ -62,5 +65,16 @@
- in inspectsocks */
- #undef HAVE_GETHOSTBYNAME
-
- /* Location of configuration file (typically /etc/tsocks.conf) */
- #undef CONF_FILE
-+
-+/* Define to indicate the correct signature for gethostbyname_r */
-+#undef HAVE_FUNC_GETHOSTBYNAME_R_6
-+#undef HAVE_FUNC_GETHOSTBYNAME_R_5
-+#undef HAVE_FUNC_GETHOSTBYNAME_R_3
-+
-+/* Signatures for name resolution stuff */
-+#undef GETHOSTBYNAME_SIGNATURE
-+#undef GETADDRINFO_SIGNATURE
-+#undef GETIPNODEBYNAME_SIGNATURE
-+
-diff -rN -U 5 tsocks-1.8/aclocal/ac_c_gethostbyname_r.m4 tsocks/aclocal/ac_c_gethostbyname_r.m4
---- tsocks-1.8/aclocal/ac_c_gethostbyname_r.m4 1970-01-01 12:00:00.000000000 +1200
-+++ tsocks/aclocal/ac_c_gethostbyname_r.m4 2005-09-27 05:55:58.000000000 +1200
-@@ -0,0 +1,132 @@
-+dnl http://autoconf-archive.cryp.to/ax_func_which_gethostbyname_r.html
-+
-+AC_DEFUN([AX_FUNC_WHICH_GETHOSTBYNAME_R], [
-+
-+ AC_LANG_PUSH(C)
-+ AC_MSG_CHECKING([how many arguments gethostbyname_r() takes])
-+
-+ AC_CACHE_VAL(ac_cv_func_which_gethostbyname_r, [
-+
-+################################################################
-+
-+ac_cv_func_which_gethostbyname_r=unknown
-+
-+#
-+# ONE ARGUMENT (sanity check)
-+#
-+
-+# This should fail, as there is no variant of gethostbyname_r() that takes
-+# a single argument. If it actually compiles, then we can assume that
-+# netdb.h is not declaring the function, and the compiler is thereby
-+# assuming an implicit prototype. In which case, we're out of luck.
-+#
-+AC_COMPILE_IFELSE(
-+ AC_LANG_PROGRAM(
-+ [[#include <netdb.h>]],
-+ [[
-+ char *name = "www.gnu.org";
-+ (void)gethostbyname_r(name) /* ; */
-+ ]]),
-+ ac_cv_func_which_gethostbyname_r=no)
-+
-+#
-+# SIX ARGUMENTS
-+# (e.g. Linux)
-+#
-+
-+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
-+
-+AC_COMPILE_IFELSE(
-+ AC_LANG_PROGRAM(
-+ [[#include <netdb.h>]],
-+ [[
-+ char *name = "www.gnu.org";
-+ struct hostent ret, *retp;
-+ char buf@<:@1024@:>@;
-+ int buflen = 1024;
-+ int my_h_errno;
-+ (void)gethostbyname_r(name, &ret, buf, buflen, &retp, &my_h_errno) /* ; */
-+ ]]),
-+ ac_cv_func_which_gethostbyname_r=six)
-+
-+fi
-+
-+#
-+# FIVE ARGUMENTS
-+# (e.g. Solaris)
-+#
-+
-+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
-+
-+AC_COMPILE_IFELSE(
-+ AC_LANG_PROGRAM(
-+ [[#include <netdb.h>]],
-+ [[
-+ char *name = "www.gnu.org";
-+ struct hostent ret;
-+ char buf@<:@1024@:>@;
-+ int buflen = 1024;
-+ int my_h_errno;
-+ (void)gethostbyname_r(name, &ret, buf, buflen, &my_h_errno) /* ; */
-+ ]]),
-+ ac_cv_func_which_gethostbyname_r=five)
-+
-+fi
-+
-+#
-+# THREE ARGUMENTS
-+# (e.g. AIX, HP-UX, Tru64)
-+#
-+
-+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
-+
-+AC_COMPILE_IFELSE(
-+ AC_LANG_PROGRAM(
-+ [[#include <netdb.h>]],
-+ [[
-+ char *name = "www.gnu.org";
-+ struct hostent ret;
-+ struct hostent_data data;
-+ (void)gethostbyname_r(name, &ret, &data) /* ; */
-+ ]]),
-+ ac_cv_func_which_gethostbyname_r=three)
-+
-+fi
-+
-+################################################################
-+
-+]) dnl end AC_CACHE_VAL
-+
-+case "$ac_cv_func_which_gethostbyname_r" in
-+ three)
-+ AC_MSG_RESULT([three])
-+ AC_DEFINE(HAVE_FUNC_GETHOSTBYNAME_R_3)
-+ ;;
-+
-+ five)
-+ AC_MSG_RESULT([five])
-+ AC_DEFINE(HAVE_FUNC_GETHOSTBYNAME_R_5)
-+ ;;
-+
-+ six)
-+ AC_MSG_RESULT([six])
-+ AC_DEFINE(HAVE_FUNC_GETHOSTBYNAME_R_6)
-+ ;;
-+
-+ no)
-+ AC_MSG_RESULT([cannot find function declaration in netdb.h])
-+ ;;
-+
-+ unknown)
-+ AC_MSG_RESULT([can't tell])
-+ ;;
-+
-+ *)
-+ AC_MSG_ERROR([internal error])
-+ ;;
-+esac
-+
-+AC_LANG_POP(C)
-+
-+]) dnl end AC_DEFUN
-+
-diff -rN -U 5 tsocks-1.8/autogen.sh tsocks/autogen.sh
---- tsocks-1.8/autogen.sh 1970-01-01 12:00:00.000000000 +1200
-+++ tsocks/autogen.sh 2005-10-01 17:54:45.000000000 +1200
-@@ -0,0 +1,6 @@
-+#!/bin/sh
-+
-+aclocal -I aclocal
-+autoconf
-+autoheader
-+
-diff -rN -U 5 tsocks-1.8/ChangeLog tsocks/ChangeLog
---- tsocks-1.8/ChangeLog 2002-05-18 17:22:26.000000000 +1200
-+++ tsocks/ChangeLog 2005-10-02 16:03:18.000000000 +1300
-@@ -1,5 +1,9 @@
-+version 1.80tordns - 2005.10.4 bls at totalinfosecurity.com
-+ Intercept gethostbyname() and friends, added --tordns
-+ option for better name resolution with Tor.
-+
- version 1.80Beta5 - 2002.?.?? delius at progsoc.uts.edu.au
- Intercept close() to fix problems with tsocks and
- kmail
- Add FAQ to distribution
-
-diff -rN -U 5 tsocks-1.8/common.c tsocks/common.c
---- tsocks-1.8/common.c 2002-07-16 10:35:06.000000000 +1200
-+++ tsocks/common.c 2005-10-01 21:37:00.000000000 +1200
-@@ -76,10 +76,31 @@
- }
-
- logstamp = timestamp;
- }
-
-+/* Count the bits in a netmask. This is a little bit buggy; it assumes
-+ all the zeroes are on the right... */
-+
-+int count_netmask_bits(uint32_t mask)
-+{
-+ int i;
-+ int nbits = 0;
-+
-+ for(i=0; i<32; i++) {
-+ if((mask >> i) & 1) {
-+ nbits++;
-+ }
-+ }
-+ mask = ~mask;
-+ mask = ntohl(mask);
-+ if(mask & (mask+1)) {
-+ return -1; /* Noncontiguous */
-+ }
-+ return nbits;
-+}
-+
- void show_msg(int level, char *fmt, ...) {
- va_list ap;
- int saveerr;
- extern char *progname;
- char timestring[20];
-@@ -105,11 +126,11 @@
- strftime(timestring, sizeof(timestring), "%H:%M:%S",
- localtime(×tamp));
- fprintf(logfile, "%s ", timestring);
- }
-
-- fputs(progname, logfile);
-+ // fputs(progname, logfile);
-
- if (logstamp) {
- fprintf(logfile, "(%d)", getpid());
- }
-
-diff -rN -U 5 tsocks-1.8/common.h tsocks/common.h
---- tsocks-1.8/common.h 2002-07-16 10:27:00.000000000 +1200
-+++ tsocks/common.h 2005-09-27 10:48:20.000000000 +1200
-@@ -1,9 +1,10 @@
- /* Common functions provided in common.c */
-
- void set_log_options(int, char *, int);
- void show_msg(int level, char *, ...);
-+int count_netmask_bits(uint32_t mask);
- unsigned int resolve_ip(char *, int, int);
-
- #define MSGNONE -1
- #define MSGERR 0
- #define MSGWARN 1
-diff -rN -U 5 tsocks-1.8/config.h.in tsocks/config.h.in
---- tsocks-1.8/config.h.in 2002-05-18 16:59:42.000000000 +1200
-+++ tsocks/config.h.in 2005-10-01 17:23:20.000000000 +1200
-@@ -1,9 +1,7 @@
--/* config.h.in. Generated automatically from configure.in by autoheader. */
--
--/* Define if you have the ANSI C header files. */
--#undef STDC_HEADERS
-+/* config.h.in. Generated from configure.in by autoheader. */
-+/* accconfig.h -- `autoheader' will generate config.h.in for tsocks . */
-
- /* Allow tsocks to generate messages to stderr when errors are
- encountered, this is really important and should only be disabled if
- you're REALLY sure. It can also be turned off at run time, see the man
- page for details */
-@@ -49,10 +47,18 @@
- /* Work out which function we have for conversion from string IPs to
- numerical ones */
- #undef HAVE_INET_ADDR
- #undef HAVE_INET_ATON
-
-+/* We use strsep which isn't on all machines, but we provide our own
-+definition of it for those which don't have it, this causes us to define
-+our version */
-+#undef DEFINE_STRSEP
-+
-+/* Should we resolve DNS entries in a way which works well with tor? */
-+#undef USE_TOR_DNS
-+
- /* Allow the use of DNS names in the socks configuration file for socks
- servers. This doesn't work if socksified DNS is enabled for obvious
- reasons, it also introduces overhead, but people seem to want it */
- #define HOSTNAMES 0
-
-@@ -61,28 +67,90 @@
- #undef HAVE_GETHOSTBYNAME
-
- /* Location of configuration file (typically /etc/tsocks.conf) */
- #undef CONF_FILE
-
--/* Define if you have the strcspn function. */
-+/* Define to indicate the correct signature for gethostbyname_r */
-+#undef HAVE_FUNC_GETHOSTBYNAME_R_6
-+#undef HAVE_FUNC_GETHOSTBYNAME_R_5
-+#undef HAVE_FUNC_GETHOSTBYNAME_R_3
-+
-+/* Signatures for name resolution stuff */
-+#undef GETHOSTBYNAME_SIGNATURE
-+#undef GETADDRINFO_SIGNATURE
-+#undef GETIPNODEBYNAME_SIGNATURE
-+
-+
-+/* Define to 1 if you have the <inttypes.h> header file. */
-+#undef HAVE_INTTYPES_H
-+
-+/* Define to 1 if you have the `dl' library (-ldl). */
-+#undef HAVE_LIBDL
-+
-+/* Define to 1 if you have the `socket' library (-lsocket). */
-+#undef HAVE_LIBSOCKET
-+
-+/* Define to 1 if you have the <memory.h> header file. */
-+#undef HAVE_MEMORY_H
-+
-+/* Define to 1 if you have the `mmap' function. */
-+#undef HAVE_MMAP
-+
-+/* Define to 1 if you have the <stdint.h> header file. */
-+#undef HAVE_STDINT_H
-+
-+/* Define to 1 if you have the <stdlib.h> header file. */
-+#undef HAVE_STDLIB_H
-+
-+/* Define to 1 if you have the `strcasecmp' function. */
-+#undef HAVE_STRCASECMP
-+
-+/* Define to 1 if you have the `strcspn' function. */
- #undef HAVE_STRCSPN
-
--/* Define if you have the strdup function. */
-+/* Define to 1 if you have the `strdup' function. */
- #undef HAVE_STRDUP
-
--/* Define if you have the strerror function. */
-+/* Define to 1 if you have the `strerror' function. */
- #undef HAVE_STRERROR
-
--/* Define if you have the strspn function. */
-+/* Define to 1 if you have the <strings.h> header file. */
-+#undef HAVE_STRINGS_H
-+
-+/* Define to 1 if you have the <string.h> header file. */
-+#undef HAVE_STRING_H
-+
-+/* Define to 1 if you have the `strncasecmp' function. */
-+#undef HAVE_STRNCASECMP
-+
-+/* Define to 1 if you have the `strspn' function. */
- #undef HAVE_STRSPN
-
--/* Define if you have the strtol function. */
-+/* Define to 1 if you have the `strtol' function. */
- #undef HAVE_STRTOL
-
--/* Define if you have the <unistd.h> header file. */
-+/* Define to 1 if you have the <sys/stat.h> header file. */
-+#undef HAVE_SYS_STAT_H
-+
-+/* Define to 1 if you have the <sys/types.h> header file. */
-+#undef HAVE_SYS_TYPES_H
-+
-+/* Define to 1 if you have the <unistd.h> header file. */
- #undef HAVE_UNISTD_H
-
--/* Define if you have the dl library (-ldl). */
--#undef HAVE_LIBDL
-+/* Define to the address where bug reports for this package should be sent. */
-+#undef PACKAGE_BUGREPORT
-
--/* Define if you have the socket library (-lsocket). */
--#undef HAVE_LIBSOCKET
-+/* Define to the full name of this package. */
-+#undef PACKAGE_NAME
-+
-+/* Define to the full name and version of this package. */
-+#undef PACKAGE_STRING
-+
-+/* Define to the one symbol short name of this package. */
-+#undef PACKAGE_TARNAME
-+
-+/* Define to the version of this package. */
-+#undef PACKAGE_VERSION
-+
-+/* Define to 1 if you have the ANSI C header files. */
-+#undef STDC_HEADERS
-diff -rN -U 5 tsocks-1.8/config.status tsocks/config.status
---- tsocks-1.8/config.status 2002-07-16 10:51:14.000000000 +1200
-+++ tsocks/config.status 1970-01-01 12:00:00.000000000 +1200
-@@ -1,312 +0,0 @@
--#! /bin/sh
--# Generated automatically by configure.
--# Run this file to recreate the current configuration.
--# This directory was configured as follows,
--# on host cardini.homenet:
--#
--# ./configure
--#
--# Compiler output produced by configure, useful for debugging
--# configure, is in ./config.log if it exists.
--
--ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]"
--for ac_option
--do
-- case "$ac_option" in
-- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-- echo "running ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion"
-- exec ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion ;;
-- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-- echo "./config.status generated by autoconf version 2.13"
-- exit 0 ;;
-- -help | --help | --hel | --he | --h)
-- echo "$ac_cs_usage"; exit 0 ;;
-- *) echo "$ac_cs_usage"; exit 1 ;;
-- esac
--done
--
--ac_given_srcdir=.
--ac_given_INSTALL="/usr/bin/install -c"
--
--trap 'rm -fr Makefile config.h conftest*; exit 1' 1 2 15
--
--# Protect against being on the right side of a sed subst in config.status.
--sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g;
-- s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
--/^[ ]*VPATH[ ]*=[^:]*$/d
--
--s%@SHELL@%/bin/sh%g
--s%@CFLAGS@%-g -O2 -Wall%g
--s%@CPPFLAGS@%%g
--s%@CXXFLAGS@%%g
--s%@FFLAGS@%%g
--s%@DEFS@%-DHAVE_CONFIG_H%g
--s%@LDFLAGS@%%g
--s%@LIBS@% -lc%g
--s%@exec_prefix@%${prefix}%g
--s%@prefix@%/usr%g
--s%@program_transform_name@%s,x,x,%g
--s%@bindir@%${exec_prefix}/bin%g
--s%@sbindir@%${exec_prefix}/sbin%g
--s%@libexecdir@%${exec_prefix}/libexec%g
--s%@datadir@%${prefix}/share%g
--s%@sysconfdir@%${prefix}/etc%g
--s%@sharedstatedir@%${prefix}/com%g
--s%@localstatedir@%${prefix}/var%g
--s%@libdir@%/lib%g
--s%@includedir@%${prefix}/include%g
--s%@oldincludedir@%/usr/include%g
--s%@infodir@%${prefix}/info%g
--s%@mandir@%${prefix}/man%g
--s%@host@%i586-pc-linux-gnu%g
--s%@host_alias@%i586-pc-linux-gnu%g
--s%@host_cpu@%i586%g
--s%@host_vendor@%pc%g
--s%@host_os@%linux-gnu%g
--s%@CC@%gcc%g
--s%@INSTALL_PROGRAM@%${INSTALL}%g
--s%@INSTALL_SCRIPT@%${INSTALL_PROGRAM}%g
--s%@INSTALL_DATA@%${INSTALL} -m 644%g
--s%@LN_S@%ln -s%g
--s%@CPP@%gcc -E%g
--s%@FIND@%%g
--s%@TAIL@%%g
--s%@SPECIALLIBS@%-ldl %g
--
--CEOF
--
--# Split the substitutions into bite-sized pieces for seds with
--# small command number limits, like on Digital OSF/1 and HP-UX.
--ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
--ac_file=1 # Number of current file.
--ac_beg=1 # First line for current file.
--ac_end=$ac_max_sed_cmds # Line after last line for current file.
--ac_more_lines=:
--ac_sed_cmds=""
--while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-- else
-- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-- fi
-- if test ! -s conftest.s$ac_file; then
-- ac_more_lines=false
-- rm -f conftest.s$ac_file
-- else
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f conftest.s$ac_file"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-- fi
-- ac_file=`expr $ac_file + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_cmds`
-- fi
--done
--if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
--fi
--
--CONFIG_FILES=${CONFIG_FILES-"Makefile"}
--for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-- esac
--
-- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
--
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-- else
-- ac_dir_suffix= ac_dots=
-- fi
--
-- case "$ac_given_srcdir" in
-- .) srcdir=.
-- if test -z "$ac_dots"; then top_srcdir=.
-- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-- *) # Relative path.
-- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-- top_srcdir="$ac_dots$ac_given_srcdir" ;;
-- esac
--
-- case "$ac_given_INSTALL" in
-- [/$]*) INSTALL="$ac_given_INSTALL" ;;
-- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-- esac
--
-- echo creating "$ac_file"
-- rm -f "$ac_file"
-- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-- case "$ac_file" in
-- *Makefile*) ac_comsub="1i\\
--# $configure_input" ;;
-- *) ac_comsub= ;;
-- esac
--
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- sed -e "$ac_comsub
--s%@configure_input@%$configure_input%g
--s%@srcdir@%$srcdir%g
--s%@top_srcdir@%$top_srcdir%g
--s%@INSTALL@%$INSTALL%g
--" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
--fi; done
--rm -f conftest.s*
--
--# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
--# NAME is the cpp macro being defined and VALUE is the value it is being given.
--#
--# ac_d sets the value in "#define NAME VALUE" lines.
--ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
--ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
--ac_dC='\3'
--ac_dD='%g'
--# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
--ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_uB='\([ ]\)%\1#\2define\3'
--ac_uC=' '
--ac_uD='\4%g'
--# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
--ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_eB='$%\1#\2define\3'
--ac_eC=' '
--ac_eD='%g'
--
--if test "${CONFIG_HEADERS+set}" != set; then
-- CONFIG_HEADERS="config.h"
--fi
--for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-- esac
--
-- echo creating $ac_file
--
-- rm -f conftest.frag conftest.in conftest.out
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- cat $ac_file_inputs > conftest.in
--
-- cat > conftest.frag <<CEOF
--${ac_dA}CONF_FILE${ac_dB}CONF_FILE${ac_dC}"/etc/tsocks.conf"${ac_dD}
--${ac_uA}CONF_FILE${ac_uB}CONF_FILE${ac_uC}"/etc/tsocks.conf"${ac_uD}
--${ac_eA}CONF_FILE${ac_eB}CONF_FILE${ac_eC}"/etc/tsocks.conf"${ac_eD}
--${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
--${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
--${ac_eA}STDC_HEADERS${ac_eB}STDC_HEADERS${ac_eC}1${ac_eD}
--${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
--${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD}
--${ac_eA}HAVE_UNISTD_H${ac_eB}HAVE_UNISTD_H${ac_eC}1${ac_eD}
--${ac_dA}HAVE_STRCSPN${ac_dB}HAVE_STRCSPN${ac_dC}1${ac_dD}
--${ac_uA}HAVE_STRCSPN${ac_uB}HAVE_STRCSPN${ac_uC}1${ac_uD}
--${ac_eA}HAVE_STRCSPN${ac_eB}HAVE_STRCSPN${ac_eC}1${ac_eD}
--CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--
-- cat > conftest.frag <<CEOF
--${ac_dA}HAVE_STRDUP${ac_dB}HAVE_STRDUP${ac_dC}1${ac_dD}
--${ac_uA}HAVE_STRDUP${ac_uB}HAVE_STRDUP${ac_uC}1${ac_uD}
--${ac_eA}HAVE_STRDUP${ac_eB}HAVE_STRDUP${ac_eC}1${ac_eD}
--${ac_dA}HAVE_STRERROR${ac_dB}HAVE_STRERROR${ac_dC}1${ac_dD}
--${ac_uA}HAVE_STRERROR${ac_uB}HAVE_STRERROR${ac_uC}1${ac_uD}
--${ac_eA}HAVE_STRERROR${ac_eB}HAVE_STRERROR${ac_eC}1${ac_eD}
--${ac_dA}HAVE_STRSPN${ac_dB}HAVE_STRSPN${ac_dC}1${ac_dD}
--${ac_uA}HAVE_STRSPN${ac_uB}HAVE_STRSPN${ac_uC}1${ac_uD}
--${ac_eA}HAVE_STRSPN${ac_eB}HAVE_STRSPN${ac_eC}1${ac_eD}
--${ac_dA}HAVE_STRTOL${ac_dB}HAVE_STRTOL${ac_dC}1${ac_dD}
--${ac_uA}HAVE_STRTOL${ac_uB}HAVE_STRTOL${ac_uC}1${ac_uD}
--${ac_eA}HAVE_STRTOL${ac_eB}HAVE_STRTOL${ac_eC}1${ac_eD}
--CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--
-- cat > conftest.frag <<CEOF
--${ac_dA}HAVE_INET_ATON${ac_dB}HAVE_INET_ATON${ac_dC}1${ac_dD}
--${ac_uA}HAVE_INET_ATON${ac_uB}HAVE_INET_ATON${ac_uC}1${ac_uD}
--${ac_eA}HAVE_INET_ATON${ac_eB}HAVE_INET_ATON${ac_eC}1${ac_eD}
--${ac_dA}HAVE_GETHOSTBYNAME${ac_dB}HAVE_GETHOSTBYNAME${ac_dC}1${ac_dD}
--${ac_uA}HAVE_GETHOSTBYNAME${ac_uB}HAVE_GETHOSTBYNAME${ac_uC}1${ac_uD}
--${ac_eA}HAVE_GETHOSTBYNAME${ac_eB}HAVE_GETHOSTBYNAME${ac_eC}1${ac_eD}
--${ac_dA}HAVE_LIBDL${ac_dB}HAVE_LIBDL${ac_dC}1${ac_dD}
--${ac_uA}HAVE_LIBDL${ac_uB}HAVE_LIBDL${ac_uC}1${ac_uD}
--${ac_eA}HAVE_LIBDL${ac_eB}HAVE_LIBDL${ac_eC}1${ac_eD}
--${ac_dA}ALLOW_ENV_CONFIG${ac_dB}ALLOW_ENV_CONFIG${ac_dC}1${ac_dD}
--${ac_uA}ALLOW_ENV_CONFIG${ac_uB}ALLOW_ENV_CONFIG${ac_uC}1${ac_uD}
--${ac_eA}ALLOW_ENV_CONFIG${ac_eB}ALLOW_ENV_CONFIG${ac_eC}1${ac_eD}
--CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--
-- cat > conftest.frag <<CEOF
--${ac_dA}ALLOW_MSG_OUTPUT${ac_dB}ALLOW_MSG_OUTPUT${ac_dC}1${ac_dD}
--${ac_uA}ALLOW_MSG_OUTPUT${ac_uB}ALLOW_MSG_OUTPUT${ac_uC}1${ac_uD}
--${ac_eA}ALLOW_MSG_OUTPUT${ac_eB}ALLOW_MSG_OUTPUT${ac_eC}1${ac_eD}
--${ac_dA}HOSTNAMES${ac_dB}HOSTNAMES${ac_dC}1${ac_dD}
--${ac_uA}HOSTNAMES${ac_uB}HOSTNAMES${ac_uC}1${ac_uD}
--${ac_eA}HOSTNAMES${ac_eB}HOSTNAMES${ac_eC}1${ac_eD}
--${ac_dA}SELECT_SIGNATURE${ac_dB}SELECT_SIGNATURE${ac_dC}int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout${ac_dD}
--${ac_uA}SELECT_SIGNATURE${ac_uB}SELECT_SIGNATURE${ac_uC}int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout${ac_uD}
--${ac_eA}SELECT_SIGNATURE${ac_eB}SELECT_SIGNATURE${ac_eC}int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout${ac_eD}
--${ac_dA}CONNECT_SIGNATURE${ac_dB}CONNECT_SIGNATURE${ac_dC}int __fd, const struct sockaddr_in * __addr, socklen_t __len${ac_dD}
--${ac_uA}CONNECT_SIGNATURE${ac_uB}CONNECT_SIGNATURE${ac_uC}int __fd, const struct sockaddr_in * __addr, socklen_t __len${ac_uD}
--${ac_eA}CONNECT_SIGNATURE${ac_eB}CONNECT_SIGNATURE${ac_eC}int __fd, const struct sockaddr_in * __addr, socklen_t __len${ac_eD}
--CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--
-- cat > conftest.frag <<CEOF
--${ac_dA}CONNECT_SOCKARG${ac_dB}CONNECT_SOCKARG${ac_dC}struct sockaddr_in *${ac_dD}
--${ac_uA}CONNECT_SOCKARG${ac_uB}CONNECT_SOCKARG${ac_uC}struct sockaddr_in *${ac_uD}
--${ac_eA}CONNECT_SOCKARG${ac_eB}CONNECT_SOCKARG${ac_eC}struct sockaddr_in *${ac_eD}
--${ac_dA}CLOSE_SIGNATURE${ac_dB}CLOSE_SIGNATURE${ac_dC}int fd${ac_dD}
--${ac_uA}CLOSE_SIGNATURE${ac_uB}CLOSE_SIGNATURE${ac_uC}int fd${ac_uD}
--${ac_eA}CLOSE_SIGNATURE${ac_eB}CLOSE_SIGNATURE${ac_eC}int fd${ac_eD}
--${ac_dA}POLL_SIGNATURE${ac_dB}POLL_SIGNATURE${ac_dC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_dD}
--${ac_uA}POLL_SIGNATURE${ac_uB}POLL_SIGNATURE${ac_uC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_uD}
--${ac_eA}POLL_SIGNATURE${ac_eB}POLL_SIGNATURE${ac_eC}struct pollfd *ufds, unsigned long nfds, int timeout${ac_eD}
--s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
--CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--
-- rm -f conftest.frag conftest.h
-- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
-- cat conftest.in >> conftest.h
-- rm -f conftest.in
-- if cmp -s $ac_file conftest.h 2>/dev/null; then
-- echo "$ac_file is unchanged"
-- rm -f conftest.h
-- else
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- fi
-- rm -f $ac_file
-- mv conftest.h $ac_file
-- fi
--fi; done
--
--
--
--exit 0
-diff -rN -U 5 tsocks-1.8/configure tsocks/configure
---- tsocks-1.8/configure 2002-07-16 10:51:08.000000000 +1200
-+++ tsocks/configure 2005-10-02 21:57:17.000000000 +1300
-@@ -1,53 +1,345 @@
- #! /bin/sh
--
- # Guess values for system-dependent variables and create Makefiles.
--# Generated automatically using autoconf version 2.13
--# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-+# Generated by GNU Autoconf 2.59.
- #
-+# Copyright (C) 2003 Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+DUALCASE=1; export DUALCASE # for MKS sh
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
-+ else
-+ as_ln_s='ln -s'
-+ fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-
--# Defaults:
--ac_help=
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+exec 6>&1
-+
-+#
-+# Initializations.
-+#
- ac_default_prefix=/usr/local
--# Any additions from configure.in:
-+ac_config_libobj_dir=.
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Maximum number of lines to put in a shell here document.
-+# This variable seems obsolete. It should probably be removed, and
-+# only ac_max_sed_lines should be used.
-+: ${ac_max_here_lines=38}
-+
-+# Identity of this package.
-+PACKAGE_NAME=
-+PACKAGE_TARNAME=
-+PACKAGE_VERSION=
-+PACKAGE_STRING=
-+PACKAGE_BUGREPORT=
-+
-+ac_unique_file="saveme.c"
- ac_default_prefix=/usr
--ac_help="$ac_help
-- --enable-socksdns force dns lookups to use tcp "
--ac_help="$ac_help
-- --disable-debug disable ALL error messages from tsocks "
--ac_help="$ac_help
-- --enable-oldmethod use the old method to override connect "
--ac_help="$ac_help
-- --disable-hostnames disable hostname lookups for socks servers "
--ac_help="$ac_help
-- --disable-envconf do not allow TSOCKS_CONF_FILE to specify configuration file "
--ac_help="$ac_help
-- --with-conf=<file> location of configuration file (/etc/tsocks.conf default)"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#if HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#if HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#if STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# if HAVE_STDLIB_H
-+# include <stdlib.h>
-+# endif
-+#endif
-+#if HAVE_STRING_H
-+# if !STDC_HEADERS && HAVE_MEMORY_H
-+# include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#if HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#if HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#else
-+# if HAVE_STDINT_H
-+# include <stdint.h>
-+# endif
-+#endif
-+#if HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S CPP EGREP DEADPOOL_O FIND TAIL SPECIALLIBS LIBOBJS LTLIBOBJS'
-+ac_subst_files=''
-
- # Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
- # The variables have the same names as the options, with
- # dashes changed to underlines.
--build=NONE
--cache_file=./config.cache
-+cache_file=/dev/null
- exec_prefix=NONE
--host=NONE
- no_create=
--nonopt=NONE
- no_recursion=
- prefix=NONE
- program_prefix=NONE
- program_suffix=NONE
- program_transform_name=s,x,x,
- silent=
- site=
- srcdir=
--target=NONE
- verbose=
- x_includes=NONE
- x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
- datadir='${prefix}/share'
- sysconfdir='${prefix}/etc'
-@@ -57,199 +349,143 @@
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
- infodir='${prefix}/info'
- mandir='${prefix}/man'
-
--# Initialize some other variables.
--subdirs=
--MFLAGS= MAKEFLAGS=
--SHELL=${CONFIG_SHELL-/bin/sh}
--# Maximum number of lines to put in a shell here document.
--ac_max_here_lines=12
--
- ac_prev=
- for ac_option
- do
--
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
-- case "$ac_option" in
-- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-- *) ac_optarg= ;;
-- esac
-+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case "$ac_option" in
-+ case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-- bindir="$ac_optarg" ;;
-+ bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
-- ac_prev=build ;;
-+ ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-- build="$ac_optarg" ;;
-+ build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-- cache_file="$ac_optarg" ;;
-+ cache_file=$ac_optarg ;;
-+
-+ --config-cache | -C)
-+ cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
-- datadir="$ac_optarg" ;;
-+ datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- eval "enable_${ac_feature}=no" ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "enable_${ac_feature}='$ac_optarg'" ;;
-+ eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
-- exec_prefix="$ac_optarg" ;;
-+ exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
-- -help | --help | --hel | --he)
-- # Omit some internal or obsolete options to make the list less imposing.
-- # This message is too long to be a string in the A/UX 3.1 sh.
-- cat << EOF
--Usage: configure [options] [host]
--Options: [defaults in brackets after descriptions]
--Configuration:
-- --cache-file=FILE cache test results in FILE
-- --help print this message
-- --no-create do not create output files
-- --quiet, --silent do not print \`checking...' messages
-- --version print the version of autoconf that created configure
--Directory and file names:
-- --prefix=PREFIX install architecture-independent files in PREFIX
-- [$ac_default_prefix]
-- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-- [same as prefix]
-- --bindir=DIR user executables in DIR [EPREFIX/bin]
-- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
-- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data in DIR
-- [PREFIX/share]
-- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
-- --sharedstatedir=DIR modifiable architecture-independent data in DIR
-- [PREFIX/com]
-- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
-- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
-- --includedir=DIR C header files in DIR [PREFIX/include]
-- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
-- --infodir=DIR info documentation in DIR [PREFIX/info]
-- --mandir=DIR man documentation in DIR [PREFIX/man]
-- --srcdir=DIR find the sources in DIR [configure dir or ..]
-- --program-prefix=PREFIX prepend PREFIX to installed program names
-- --program-suffix=SUFFIX append SUFFIX to installed program names
-- --program-transform-name=PROGRAM
-- run sed PROGRAM on installed program names
--EOF
-- cat << EOF
--Host type:
-- --build=BUILD configure for building on BUILD [BUILD=HOST]
-- --host=HOST configure for HOST [guessed]
-- --target=TARGET configure for TARGET [TARGET=HOST]
--Features and packages:
-- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-- --x-includes=DIR X include files are in DIR
-- --x-libraries=DIR X library files are in DIR
--EOF
-- if test -n "$ac_help"; then
-- echo "--enable and --with options recognized:$ac_help"
-- fi
-- exit 0 ;;
-+ -help | --help | --hel | --he | -h)
-+ ac_init_help=long ;;
-+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+ ac_init_help=recursive ;;
-+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+ ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
-- ac_prev=host ;;
-+ ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
-- host="$ac_optarg" ;;
-+ host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
-- includedir="$ac_optarg" ;;
-+ includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-- infodir="$ac_optarg" ;;
-+ infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
-- libdir="$ac_optarg" ;;
-+ libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
-- libexecdir="$ac_optarg" ;;
-+ libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-- localstatedir="$ac_optarg" ;;
-+ localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-- mandir="$ac_optarg" ;;
-+ mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c)
-+ | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-@@ -259,30 +495,30 @@
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-- oldincludedir="$ac_optarg" ;;
-+ oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-- prefix="$ac_optarg" ;;
-+ prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-- program_prefix="$ac_optarg" ;;
-+ program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-- program_suffix="$ac_optarg" ;;
-+ program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
-@@ -295,305 +531,842 @@
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
-- program_transform_name="$ac_optarg" ;;
-+ program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
-- sbindir="$ac_optarg" ;;
-+ sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
-- sharedstatedir="$ac_optarg" ;;
-+ sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
-- site="$ac_optarg" ;;
-+ site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-- srcdir="$ac_optarg" ;;
-+ srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-- sysconfdir="$ac_optarg" ;;
-+ sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
-- ac_prev=target ;;
-+ ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-- target="$ac_optarg" ;;
-+ target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
-- -version | --version | --versio | --versi | --vers)
-- echo "configure generated by autoconf version 2.13"
-- exit 0 ;;
-+ -version | --version | --versio | --versi | --vers | -V)
-+ ac_init_version=: ;;
-
- -with-* | --with-*)
-- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "with_${ac_package}='$ac_optarg'" ;;
-+ eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
-- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- eval "with_${ac_package}=no" ;;
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/-/_/g'`
-+ eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-- x_includes="$ac_optarg" ;;
-+ x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-- x_libraries="$ac_optarg" ;;
-+ x_libraries=$ac_optarg ;;
-
-- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-+ -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; }
- ;;
-
-+ *=*)
-+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-+ eval "$ac_envvar='$ac_optarg'"
-+ export $ac_envvar ;;
-+
- *)
-- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-- echo "configure: warning: $ac_option: invalid host type" 1>&2
-- fi
-- if test "x$nonopt" != xNONE; then
-- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-- fi
-- nonopt="$ac_option"
-+ # FIXME: should be removed in autoconf 3.0.
-+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
- done
-
- if test -n "$ac_prev"; then
-- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
--fi
--
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
--# File descriptor usage:
--# 0 standard input
--# 1 file creation
--# 2 errors and warnings
--# 3 some systems may open it to /dev/tty
--# 4 used on the Kubota Titan
--# 6 checking for... messages and results
--# 5 compiler messages saved in config.log
--if test "$silent" = yes; then
-- exec 6>/dev/null
--else
-- exec 6>&1
-+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+ { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { (exit 1); exit 1; }; }
- fi
--exec 5>./config.log
-
--echo "\
--This file contains any messages produced by compilers while
--running configure, to aid debugging if configure makes a mistake.
--" 1>&5
-+# Be sure to have absolute paths.
-+for ac_var in exec_prefix prefix
-+do
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-
--# Strip out --no-create and --no-recursion so they do not pile up.
--# Also quote any args containing shell metacharacters.
--ac_configure_args=
--for ac_arg
-+# Be sure to have absolute paths.
-+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-+ localstatedir libdir includedir oldincludedir infodir mandir
- do
-- case "$ac_arg" in
-- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c) ;;
-- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
- esac
- done
-
--# NLS nuisances.
--# Only set these to C if already set. These must not be set unconditionally
--# because not all systems understand e.g. LANG=C (notably SCO).
--# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
--# Non-C LC_CTYPE values break the ctype check.
--if test "${LANG+set}" = set; then LANG=C; export LANG; fi
--if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
--if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
--if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+ if test "x$build_alias" = x; then
-+ cross_compiling=maybe
-+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used." >&2
-+ elif test "x$build_alias" != "x$host_alias"; then
-+ cross_compiling=yes
-+ fi
-+fi
-
--# confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo > confdefs.h
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-
--# A filename unique to this package, relative to the directory that
--# configure is in, which we can look for to find out if srcdir is correct.
--ac_unique_file=saveme.c
-
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
-- ac_prog=$0
-- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-+ ac_confdir=`(dirname "$0") 2>/dev/null ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$0" : 'X\(//\)[^/]' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$0" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
- else
- ac_srcdir_defaulted=no
- fi
- if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-+ { (exit 1); exit 1; }; }
- else
-- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
- fi
- fi
--srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-+ { (exit 1); exit 1; }; }
-+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-+ac_env_build_alias_set=${build_alias+set}
-+ac_env_build_alias_value=$build_alias
-+ac_cv_env_build_alias_set=${build_alias+set}
-+ac_cv_env_build_alias_value=$build_alias
-+ac_env_host_alias_set=${host_alias+set}
-+ac_env_host_alias_value=$host_alias
-+ac_cv_env_host_alias_set=${host_alias+set}
-+ac_cv_env_host_alias_value=$host_alias
-+ac_env_target_alias_set=${target_alias+set}
-+ac_env_target_alias_value=$target_alias
-+ac_cv_env_target_alias_set=${target_alias+set}
-+ac_cv_env_target_alias_value=$target_alias
-+ac_env_CC_set=${CC+set}
-+ac_env_CC_value=$CC
-+ac_cv_env_CC_set=${CC+set}
-+ac_cv_env_CC_value=$CC
-+ac_env_CFLAGS_set=${CFLAGS+set}
-+ac_env_CFLAGS_value=$CFLAGS
-+ac_cv_env_CFLAGS_set=${CFLAGS+set}
-+ac_cv_env_CFLAGS_value=$CFLAGS
-+ac_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_env_LDFLAGS_value=$LDFLAGS
-+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_cv_env_LDFLAGS_value=$LDFLAGS
-+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_env_CPPFLAGS_value=$CPPFLAGS
-+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-+ac_env_CPP_set=${CPP+set}
-+ac_env_CPP_value=$CPP
-+ac_cv_env_CPP_set=${CPP+set}
-+ac_cv_env_CPP_value=$CPP
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+ # Omit some internal or obsolete options to make the list less imposing.
-+ # This message is too long to be a string in the A/UX 3.1 sh.
-+ cat <<_ACEOF
-+\`configure' configures this package to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE. See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+ -h, --help display this help and exit
-+ --help=short display options specific to this package
-+ --help=recursive display the short help of all the included packages
-+ -V, --version display version information and exit
-+ -q, --quiet, --silent do not print \`checking...' messages
-+ --cache-file=FILE cache test results in FILE [disabled]
-+ -C, --config-cache alias for \`--cache-file=config.cache'
-+ -n, --no-create do not create output files
-+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
-+
-+_ACEOF
-+
-+ cat <<_ACEOF
-+Installation directories:
-+ --prefix=PREFIX install architecture-independent files in PREFIX
-+ [$ac_default_prefix]
-+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-+ [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --infodir=DIR info documentation [PREFIX/info]
-+ --mandir=DIR man documentation [PREFIX/man]
-+_ACEOF
-+
-+ cat <<\_ACEOF
-+
-+System types:
-+ --build=BUILD configure for building on BUILD [guessed]
-+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+
-+ cat <<\_ACEOF
-+
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --enable-socksdns force dns lookups to use tcp
-+ --disable-tordns don't override name lookup calls to use SOCKS
-+ --disable-debug disable ALL error messages from tsocks
-+ --enable-oldmethod use the old method to override connect
-+ --enable-hostnames enable hostname lookups for socks servers
-+ --disable-envconf do not allow TSOCKS_CONF_FILE to specify configuration file
-+
-+Optional Packages:
-+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-+ --with-conf=<file> location of configuration file (/etc/tsocks.conf default)
-+
-+Some influential environment variables:
-+ CC C compiler command
-+ CFLAGS C compiler flags
-+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
-+ nonstandard directory <lib dir>
-+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-+ headers in a nonstandard directory <include dir>
-+ CPP C preprocessor
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+_ACEOF
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+ # If there are subdirs, report their specific --help.
-+ ac_popdir=`pwd`
-+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+ test -d $ac_dir || continue
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+
-+# Do not use `cd foo && pwd` to compute absolute paths, because
-+# the directories may not exist.
-+case `pwd` in
-+.) ac_abs_builddir="$ac_dir";;
-+*)
-+ case "$ac_dir" in
-+ .) ac_abs_builddir=`pwd`;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_builddir=${ac_top_builddir}.;;
-+*)
-+ case ${ac_top_builddir}. in
-+ .) ac_abs_top_builddir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_srcdir=$ac_srcdir;;
-+*)
-+ case $ac_srcdir in
-+ .) ac_abs_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_srcdir=$ac_top_srcdir;;
-+*)
-+ case $ac_top_srcdir in
-+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-+ esac;;
-+esac
-+
-+ cd $ac_dir
-+ # Check for guested configure; otherwise get Cygnus style configure.
-+ if test -f $ac_srcdir/configure.gnu; then
-+ echo
-+ $SHELL $ac_srcdir/configure.gnu --help=recursive
-+ elif test -f $ac_srcdir/configure; then
-+ echo
-+ $SHELL $ac_srcdir/configure --help=recursive
-+ elif test -f $ac_srcdir/configure.ac ||
-+ test -f $ac_srcdir/configure.in; then
-+ echo
-+ $ac_configure --help
-+ else
-+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi
-+ cd "$ac_popdir"
-+ done
-+fi
-+
-+test -n "$ac_init_help" && exit 0
-+if $ac_init_version; then
-+ cat <<\_ACEOF
-+
-+Copyright (C) 2003 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+ exit 0
-+fi
-+exec 5>config.log
-+cat >&5 <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by $as_me, which was
-+generated by GNU Autoconf 2.59. Invocation command line was
-+
-+ $ $0 $@
-+
-+_ACEOF
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ echo "PATH: $as_dir"
-+done
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+## ----------- ##
-+## Core tests. ##
-+## ----------- ##
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_sep=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+ for ac_arg
-+ do
-+ case $ac_arg in
-+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ continue ;;
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ case $ac_pass in
-+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 2)
-+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ if test $ac_must_keep_next = true; then
-+ ac_must_keep_next=false # Got value, back to normal.
-+ else
-+ case $ac_arg in
-+ *=* | --config-cache | -C | -disable-* | --disable-* \
-+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+ | -with-* | --with-* | -without-* | --without-* | --x)
-+ case "$ac_configure_args0 " in
-+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+ esac
-+ ;;
-+ -* ) ac_must_keep_next=true ;;
-+ esac
-+ fi
-+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-+ # Get rid of the leading space.
-+ ac_sep=" "
-+ ;;
-+ esac
-+ done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log. We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Be sure not to use single quotes in there, as some shells,
-+# such as our DU 5.0 friend, will then `close' the trap.
-+trap 'exit_status=$?
-+ # Save into config.log some information that might help in debugging.
-+ {
-+ echo
-+
-+ cat <<\_ASBOX
-+## ---------------- ##
-+## Cache variables. ##
-+## ---------------- ##
-+_ASBOX
-+ echo
-+ # The following way of writing the cache mishandles newlines in values,
-+{
-+ (set) 2>&1 |
-+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ sed -n \
-+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-+ ;;
-+ *)
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+}
-+ echo
-+
-+ cat <<\_ASBOX
-+## ----------------- ##
-+## Output variables. ##
-+## ----------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_vars
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+
-+ if test -n "$ac_subst_files"; then
-+ cat <<\_ASBOX
-+## ------------- ##
-+## Output files. ##
-+## ------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_files
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+ fi
-+
-+ if test -s confdefs.h; then
-+ cat <<\_ASBOX
-+## ----------- ##
-+## confdefs.h. ##
-+## ----------- ##
-+_ASBOX
-+ echo
-+ sed "/^$/d" confdefs.h | sort
-+ echo
-+ fi
-+ test "$ac_signal" != 0 &&
-+ echo "$as_me: caught signal $ac_signal"
-+ echo "$as_me: exit $exit_status"
-+ } >&5
-+ rm -f core *.core &&
-+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ exit $exit_status
-+ ' 0
-+for ac_signal in 1 2 13 15; do
-+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -rf conftest* confdefs.h
-+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-+echo >confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
- # Prefer explicitly selected file to automatically selected ones.
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
- fi
- for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
-- echo "loading site script $ac_site_file"
-+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+ sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
- done
-
- if test -r "$cache_file"; then
-- echo "loading cache $cache_file"
-- . $cache_file
-+ # Some versions of bash will fail to source /dev/null (special
-+ # files actually), so we avoid doing that.
-+ if test -f "$cache_file"; then
-+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+ case $cache_file in
-+ [\\/]* | ?:[\\/]* ) . $cache_file;;
-+ *) . ./$cache_file;;
-+ esac
-+ fi
- else
-- echo "creating cache $cache_file"
-- > $cache_file
-+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+ >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in `(set) 2>&1 |
-+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+ eval ac_new_set=\$ac_env_${ac_var}_set
-+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-+ eval ac_new_val="\$ac_env_${ac_var}_value"
-+ case $ac_old_set,$ac_new_set in
-+ set,)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,set)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,);;
-+ *)
-+ if test "x$ac_old_val" != "x$ac_new_val"; then
-+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-+echo "$as_me: former value: $ac_old_val" >&2;}
-+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-+echo "$as_me: current value: $ac_new_val" >&2;}
-+ ac_cache_corrupted=:
-+ fi;;
-+ esac
-+ # Pass precious variables to config.status.
-+ if test "$ac_new_set" = set; then
-+ case $ac_new_val in
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *) ac_arg=$ac_var=$ac_new_val ;;
-+ esac
-+ case " $ac_configure_args " in
-+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ esac
-+ fi
-+done
-+if $ac_cache_corrupted; then
-+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--ac_exeext=
--ac_objext=o
--if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-- # Stardent Vistra SVR4 grep lacks -e, says ghazi at caip.rutgers.edu.
-- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-- ac_n= ac_c='
--' ac_t=' '
-- else
-- ac_n=-n ac_c= ac_t=
-- fi
--else
-- ac_n= ac_c='\c' ac_t=
--fi
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-
-
-
-
-
-
-+ ac_config_headers="$ac_config_headers config.h"
-+
-+
-+
-+
- test "$libdir" = "\${exec_prefix}/lib" && libdir="/lib"
-
- # Check whether --enable-socksdns or --disable-socksdns was given.
- if test "${enable_socksdns+set}" = set; then
- enableval="$enable_socksdns"
-- :
--fi
-
-+fi;
-+# Check whether --enable-tordns or --disable-tordns was given.
-+if test "${enable_tordns+set}" = set; then
-+ enableval="$enable_tordns"
-+
-+fi;
- # Check whether --enable-debug or --disable-debug was given.
- if test "${enable_debug+set}" = set; then
- enableval="$enable_debug"
-- :
--fi
-
-+fi;
- # Check whether --enable-oldmethod or --disable-oldmethod was given.
- if test "${enable_oldmethod+set}" = set; then
- enableval="$enable_oldmethod"
-- :
--fi
-
-+fi;
- # Check whether --enable-hostnames or --disable-hostnames was given.
- if test "${enable_hostnames+set}" = set; then
- enableval="$enable_hostnames"
-- :
--fi
-
-+fi;
- # Check whether --enable-envconf or --disable-envconf was given.
- if test "${enable_envconf+set}" = set; then
- enableval="$enable_envconf"
-- :
--fi
-+
-+fi;
-
- # Check whether --with-conf or --without-conf was given.
- if test "${with_conf+set}" = set; then
- withval="$with_conf"
--
-+
- if test "${withval}" = "yes" ; then
-- { echo "configure: error: "--with-conf requires the location of the configuration file as an argument"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"--with-conf requires the location of the configuration file as an argument\"" >&5
-+echo "$as_me: error: \"--with-conf requires the location of the configuration file as an argument\"" >&2;}
-+ { (exit 1); exit 1; }; }
- else
-- cat >> confdefs.h <<EOF
-+ cat >>confdefs.h <<_ACEOF
- #define CONF_FILE "${withval}"
--EOF
-+_ACEOF
-
- fi
-
- else
--
-- cat >> confdefs.h <<EOF
--#define CONF_FILE "/etc/tsocks.conf"
--EOF
-
-+ cat >>confdefs.h <<_ACEOF
-+#define CONF_FILE "/etc/tsocks.conf"
-+_ACEOF
-
--fi
-
-+fi;
-
-
- ac_aux_dir=
- for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
-@@ -602,255 +1375,731 @@
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-+ elif test -f $ac_dir/shtool; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/shtool install -c"
-+ break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
--fi
--ac_config_guess=$ac_aux_dir/config.guess
--ac_config_sub=$ac_aux_dir/config.sub
--ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
--
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
- # Make sure we can run config.sub.
--if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
--else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
--fi
--
--echo $ac_n "checking host system type""... $ac_c" 1>&6
--echo "configure:624: checking host system type" >&5
--
--host_alias=$host
--case "$host_alias" in
--NONE)
-- case $nonopt in
-- NONE)
-- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-- fi ;;
-- *) host_alias=$nonopt ;;
-- esac ;;
--esac
-+$ac_config_sub sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6
-+if test "${ac_cv_build+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_build_alias=$build_alias
-+test -z "$ac_cv_build_alias" &&
-+ ac_cv_build_alias=`$ac_config_guess`
-+test -z "$ac_cv_build_alias" &&
-+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+ { (exit 1); exit 1; }; }
-+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6
-+build=$ac_cv_build
-+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+
-+echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6
-+if test "${ac_cv_host+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_host_alias=$host_alias
-+test -z "$ac_cv_host_alias" &&
-+ ac_cv_host_alias=$ac_cv_build_alias
-+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6
-+host=$ac_cv_host
-+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
--host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
--host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$host" 1>&6
-
-
--# Extract the first word of "gcc", so it can be a program name with args.
--set dummy gcc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:648: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="gcc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
- else
-- echo "$ac_t""no" 1>&6
-+ CC="$ac_cv_prog_CC"
- fi
-
-+fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:678: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-- ac_prog_rejected=yes
-- continue
-- fi
-- ac_cv_prog_CC="cc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
-- if test $# -gt 0; then
-+ if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
-- set dummy "$ac_dir/$ac_word" "$@"
-- shift
-- ac_cv_prog_CC="$@"
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
- fi
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-- if test -z "$CC"; then
-- case "`uname -s`" in
-- *win32* | *WIN32*)
-- # Extract the first word of "cl", so it can be a program name with args.
--set dummy cl; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:729: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="cl"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-- ;;
-- esac
-+
-+ test -n "$CC" && break
-+ done
-+fi
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
- fi
-- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
--echo "configure:761: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-+ test -n "$ac_ct_CC" && break
-+done
-
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+ CC=$ac_ct_CC
-+fi
-
--cat > conftest.$ac_ext << EOF
-+fi
-
--#line 772 "configure"
--#include "confdefs.h"
-
--main(){return(0);}
--EOF
--if { (eval echo configure:777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- ac_cv_prog_cc_works=yes
-- # If we can't run a trivial program, we are probably using a cross compiler.
-- if (./conftest; exit) 2>/dev/null; then
-- ac_cv_prog_cc_cross=no
-- else
-- ac_cv_prog_cc_cross=yes
-- fi
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO:" \
-+ "checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-+ (eval $ac_link_default) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Find the output, starting from the most likely. This scheme is
-+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-+# resort.
-+
-+# Be careful to initialize this variable, since it used to be cached.
-+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-+ac_cv_exeext=
-+# b.out is created by i960 compilers.
-+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-+ ;;
-+ conftest.$ac_ext )
-+ # This is the source file.
-+ ;;
-+ [ab].out )
-+ # We found the default executable, but exeext='' is most
-+ # certainly right.
-+ break;;
-+ *.* )
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ # FIXME: I believe we export ac_cv_exeext for Libtool,
-+ # but it would be cool to find out if it's true. Does anybody
-+ # maintain Libtool? --akim.
-+ export ac_cv_exeext
-+ break;;
-+ * )
-+ break;;
-+ esac
-+done
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- ac_cv_prog_cc_works=no
--fi
--rm -fr conftest*
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
--if test $ac_cv_prog_cc_works = no; then
-- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+ { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6
-+
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+ if { ac_try='./$ac_file'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ cross_compiling=no
-+ else
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ fi
- fi
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
--echo "configure:803: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
--echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
--cross_compiling=$ac_cv_prog_cc_cross
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-
--echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
--echo "configure:808: checking whether we are using GNU C" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6
-+
-+echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ export ac_cv_exeext
-+ break;;
-+ * ) break;;
-+ esac
-+done
- else
-- cat > conftest.c <<EOF
--#ifdef __GNUC__
-- yes;
--#endif
--EOF
--if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:817: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-- ac_cv_prog_gcc=yes
-+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+if test "${ac_cv_objext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+ break;;
-+ esac
-+done
- else
-- ac_cv_prog_gcc=no
--fi
--fi
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--echo "$ac_t""$ac_cv_prog_gcc" 1>&6
--
--if test $ac_cv_prog_gcc = yes; then
-- GCC=yes
--else
-- GCC=
--fi
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-
--ac_test_CFLAGS="${CFLAGS+set}"
--ac_save_CFLAGS="$CFLAGS"
--CFLAGS=
--echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
--echo "configure:836: checking whether ${CC-cc} accepts -g" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- echo 'void f(){}' > conftest.c
--if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+CFLAGS="-g"
-+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
- else
-- ac_cv_prog_cc_g=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_prog_cc_g=no
- fi
--
--echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
- if test "$ac_test_CFLAGS" = set; then
-- CFLAGS="$ac_save_CFLAGS"
-+ CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
-@@ -860,1774 +2109,4838 @@
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
- fi
-+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_stdc=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
-+ function prototypes and stuff, but not '\xHH' hex character constants.
-+ These don't provoke an error unfortunately, instead are silently treated
-+ as 'x'. The following induces an error, until -std1 is added to get
-+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
-+ array size at least. It's necessary to write '\x00'==0 to get something
-+ that's true only with -std1. */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX -qlanglvl=ansi
-+# Ultrix and OSF/1 -std1
-+# HP-UX 10.20 and later -Ae
-+# HP-UX older versions -Aa -D_HPUX_SOURCE
-+# SVR4 -Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_cc_stdc=$ac_arg
-+break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext
-+done
-+rm -f conftest.$ac_ext conftest.$ac_objext
-+CC=$ac_save_CC
-+
-+fi
-+
-+case "x$ac_cv_prog_cc_stdc" in
-+ x|xno)
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6 ;;
-+ *)
-+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-+ CC="$CC $ac_cv_prog_cc_stdc" ;;
-+esac
-+
-+# Some people use a C++ compiler to compile C. Since we use `exit',
-+# in C++ we need to declare it. In case someone uses the same compiler
-+# for both compiling C and C++ we need to have the C++ compiler decide
-+# the declaration of exit, since it's the most demanding environment.
-+cat >conftest.$ac_ext <<_ACEOF
-+#ifndef __cplusplus
-+ choke me
-+#endif
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ for ac_declaration in \
-+ '' \
-+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
-+ 'extern "C" void std::exit (int); using std::exit;' \
-+ 'extern "C" void exit (int) throw ();' \
-+ 'extern "C" void exit (int);' \
-+ 'void exit (int);'
-+do
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+#include <stdlib.h>
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+done
-+rm -f conftest*
-+if test -n "$ac_declaration"; then
-+ echo '#ifdef __cplusplus' >>confdefs.h
-+ echo $ac_declaration >>confdefs.h
-+ echo '#endif' >>confdefs.h
-+fi
-+
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- # Find a good install program. We prefer a C program (faster),
- # so one script is as good as another. But avoid the broken or
- # incompatible versions:
- # SysV /etc/install, /usr/sbin/install
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
--echo "configure:879: checking for a BSD compatible install" >&5
-+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
- if test -z "$INSTALL"; then
--if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
-- for ac_dir in $PATH; do
-- # Account for people who put trailing slashes in PATH elements.
-- case "$ac_dir/" in
-- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-- *)
-- # OSF1 and SCO ODT 3.0 have their own names for install.
-- # Don't use installbsd from OSF since it installs stuff as root
-- # by default.
-- for ac_prog in ginstall scoinst install; do
-- if test -f $ac_dir/$ac_prog; then
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
-- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
- else
-- ac_cv_path_install="$ac_dir/$ac_prog -c"
-- break 2
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
- fi
- fi
- done
-- ;;
-- esac
-- done
-- IFS="$ac_save_IFS"
-+ done
-+ ;;
-+esac
-+done
-+
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-- INSTALL="$ac_cv_path_install"
-+ INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
-- INSTALL="$ac_install_sh"
-+ INSTALL=$ac_install_sh
- fi
- fi
--echo "$ac_t""$INSTALL" 1>&6
-+echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
--test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
--echo "configure:932: checking whether ln -s works" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- rm -f conftestdata
--if ln -s X conftestdata 2>/dev/null
--then
-- rm -f conftestdata
-- ac_cv_prog_LN_S="ln -s"
-+echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- else
-- ac_cv_prog_LN_S=ln
--fi
--fi
--LN_S="$ac_cv_prog_LN_S"
--if test "$ac_cv_prog_LN_S" = "ln -s"; then
-- echo "$ac_t""yes" 1>&6
--else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6
- fi
-
-
--echo $ac_n "checking "if the C compiler accepts -Wall"""... $ac_c" 1>&6
--echo "configure:954: checking "if the C compiler accepts -Wall"" >&5
-+echo "$as_me:$LINENO: checking if the C compiler accepts -Wall" >&5
-+echo $ECHO_N "checking if the C compiler accepts -Wall... $ECHO_C" >&6
- OLDCFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -Wall"
--cat > conftest.$ac_ext <<EOF
--#line 958 "configure"
--#include "confdefs.h"
--
--int main() {
--
--; return 0; }
--EOF
--if { (eval echo configure:965: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- echo "$ac_t""yes" 1>&6
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
--
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+
- CFLAGS="$OLDCFLAGS"
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
--echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
--echo "configure:979: checking how to run the C preprocessor" >&5
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
- fi
- if test -z "$CPP"; then
--if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ if test "${ac_cv_prog_CPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- # This must be in double quotes, not single quotes, because CPP may get
-- # substituted into the Makefile and "${CC-cc}" will confuse make.
-- CPP="${CC-cc} -E"
-+ # Double quotes because CPP needs to be expanded
-+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
-- # not just through cpp.
-- cat > conftest.$ac_ext <<EOF
--#line 994 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -E -traditional-cpp"
-- cat > conftest.$ac_ext <<EOF
--#line 1011 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1017: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
- :
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -nologo -E"
-- cat > conftest.$ac_ext <<EOF
--#line 1028 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1034: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP=/lib/cpp
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
- fi
--rm -f conftest*
-- ac_cv_prog_CPP="$CPP"
-+
-+ done
-+ ac_cv_prog_CPP=$CPP
-+
-+fi
-+ CPP=$ac_cv_prog_CPP
-+else
-+ ac_cv_prog_CPP=$CPP
-+fi
-+echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
-- CPP="$ac_cv_prog_CPP"
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
- else
-- ac_cv_prog_CPP="$CPP"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
- fi
--echo "$ac_t""$CPP" 1>&6
-+rm -f conftest.err conftest.$ac_ext
-
--echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
--echo "configure:1059: checking for ANSI C header files" >&5
--if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1064 "configure"
--#include "confdefs.h"
-+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-+if test "${ac_cv_prog_egrep+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-+ then ac_cv_prog_egrep='grep -E'
-+ else ac_cv_prog_egrep='egrep'
-+ fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-+ EGREP=$ac_cv_prog_egrep
-+
-+
-+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
- #include <stdarg.h>
- #include <string.h>
- #include <float.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_stdc=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 1089 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <string.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "memchr" >/dev/null 2>&1; then
-+ $EGREP "memchr" >/dev/null 2>&1; then
- :
- else
-- rm -rf conftest*
- ac_cv_header_stdc=no
- fi
- rm -f conftest*
-
- fi
-
- if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 1107 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "free" >/dev/null 2>&1; then
-+ $EGREP "free" >/dev/null 2>&1; then
- :
- else
-- rm -rf conftest*
- ac_cv_header_stdc=no
- fi
- rm -f conftest*
-
- fi
-
- if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
--if test "$cross_compiling" = yes; then
-+ if test "$cross_compiling" = yes; then
- :
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1128 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <ctype.h>
--#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
--#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
- #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
--int main () { int i; for (i = 0; i < 256; i++)
--if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
--exit (0); }
--
--EOF
--if { (eval echo configure:1139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ exit(2);
-+ exit (0);
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- :
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
- fi
--
--echo "$ac_t""$ac_cv_header_stdc" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6
- if test $ac_cv_header_stdc = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define STDC_HEADERS 1
--EOF
-+_ACEOF
-
- fi
-
-
--ac_safe=`echo "dlfcn.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for dlfcn.h""... $ac_c" 1>&6
--echo "configure:1165: checking for dlfcn.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1170 "configure"
--#include "confdefs.h"
--#include <dlfcn.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1175: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
--fi
--rm -f conftest*
--fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
--else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "dlfcn.h not found"" 1>&2; exit 1; }
--fi
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
--ac_safe=`echo "sys/socket.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for sys/socket.h""... $ac_c" 1>&6
--echo "configure:1200: checking for sys/socket.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1205 "configure"
--#include "confdefs.h"
--#include <sys/socket.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1210: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
--fi
--rm -f conftest*
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+ inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Header=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+if test "${ac_cv_header_dlfcn_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for dlfcn.h" >&5
-+echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6
-+if test "${ac_cv_header_dlfcn_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5
-+echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking dlfcn.h usability" >&5
-+echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <dlfcn.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking dlfcn.h presence" >&5
-+echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <dlfcn.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for dlfcn.h" >&5
-+echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6
-+if test "${ac_cv_header_dlfcn_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_dlfcn_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5
-+echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+if test $ac_cv_header_dlfcn_h = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "sys/socket.h not found"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"dlfcn.h not found\"" >&5
-+echo "$as_me: error: \"dlfcn.h not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-
--ac_safe=`echo "arpa/inet.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for arpa/inet.h""... $ac_c" 1>&6
--echo "configure:1235: checking for arpa/inet.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+if test "${ac_cv_header_sys_socket_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for sys/socket.h" >&5
-+echo $ECHO_N "checking for sys/socket.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_socket_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_socket_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_socket_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking sys/socket.h usability" >&5
-+echo $ECHO_N "checking sys/socket.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <sys/socket.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking sys/socket.h presence" >&5
-+echo $ECHO_N "checking sys/socket.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/socket.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1240 "configure"
--#include "confdefs.h"
--#include <arpa/inet.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1245: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/socket.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/socket.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/socket.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/socket.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/socket.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/socket.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/socket.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/socket.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/socket.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for sys/socket.h" >&5
-+echo $ECHO_N "checking for sys/socket.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_socket_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_socket_h=$ac_header_preproc
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_socket_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_socket_h" >&6
-+
-+fi
-+if test $ac_cv_header_sys_socket_h = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "arpa/inet.h not found"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"sys/socket.h not found\"" >&5
-+echo "$as_me: error: \"sys/socket.h not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-
--ac_safe=`echo "fcntl.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for fcntl.h""... $ac_c" 1>&6
--echo "configure:1270: checking for fcntl.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+if test "${ac_cv_header_arpa_inet_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for arpa/inet.h" >&5
-+echo $ECHO_N "checking for arpa/inet.h... $ECHO_C" >&6
-+if test "${ac_cv_header_arpa_inet_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_arpa_inet_h" >&5
-+echo "${ECHO_T}$ac_cv_header_arpa_inet_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking arpa/inet.h usability" >&5
-+echo $ECHO_N "checking arpa/inet.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <arpa/inet.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking arpa/inet.h presence" >&5
-+echo $ECHO_N "checking arpa/inet.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <arpa/inet.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1275 "configure"
--#include "confdefs.h"
--#include <fcntl.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: arpa/inet.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: arpa/inet.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: arpa/inet.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: arpa/inet.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: arpa/inet.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: arpa/inet.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: arpa/inet.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: arpa/inet.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: arpa/inet.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for arpa/inet.h" >&5
-+echo $ECHO_N "checking for arpa/inet.h... $ECHO_C" >&6
-+if test "${ac_cv_header_arpa_inet_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_arpa_inet_h=$ac_header_preproc
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_header_arpa_inet_h" >&5
-+echo "${ECHO_T}$ac_cv_header_arpa_inet_h" >&6
-+
-+fi
-+if test $ac_cv_header_arpa_inet_h = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "fcntl.h not found"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"arpa/inet.h not found\"" >&5
-+echo "$as_me: error: \"arpa/inet.h not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-
--ac_safe=`echo "sys/poll.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for sys/poll.h""... $ac_c" 1>&6
--echo "configure:1305: checking for sys/poll.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+if test "${ac_cv_header_fcntl_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for fcntl.h" >&5
-+echo $ECHO_N "checking for fcntl.h... $ECHO_C" >&6
-+if test "${ac_cv_header_fcntl_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_fcntl_h" >&5
-+echo "${ECHO_T}$ac_cv_header_fcntl_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking fcntl.h usability" >&5
-+echo $ECHO_N "checking fcntl.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <fcntl.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking fcntl.h presence" >&5
-+echo $ECHO_N "checking fcntl.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <fcntl.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1310 "configure"
--#include "confdefs.h"
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: fcntl.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: fcntl.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: fcntl.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: fcntl.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: fcntl.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: fcntl.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: fcntl.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: fcntl.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: fcntl.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for fcntl.h" >&5
-+echo $ECHO_N "checking for fcntl.h... $ECHO_C" >&6
-+if test "${ac_cv_header_fcntl_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_fcntl_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_fcntl_h" >&5
-+echo "${ECHO_T}$ac_cv_header_fcntl_h" >&6
-+
-+fi
-+if test $ac_cv_header_fcntl_h = yes; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: \"fcntl.h not found\"" >&5
-+echo "$as_me: error: \"fcntl.h not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+if test "${ac_cv_header_sys_poll_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for sys/poll.h" >&5
-+echo $ECHO_N "checking for sys/poll.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_poll_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_poll_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_poll_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking sys/poll.h usability" >&5
-+echo $ECHO_N "checking sys/poll.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <sys/poll.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking sys/poll.h presence" >&5
-+echo $ECHO_N "checking sys/poll.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/poll.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/poll.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/poll.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/poll.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/poll.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/poll.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/poll.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/poll.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/poll.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/poll.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for sys/poll.h" >&5
-+echo $ECHO_N "checking for sys/poll.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_poll_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_poll_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_poll_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_poll_h" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+if test $ac_cv_header_sys_poll_h = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "sys/poll.h not found"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"sys/poll.h not found\"" >&5
-+echo "$as_me: error: \"sys/poll.h not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+if test "${ac_cv_header_sys_mman_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for sys/mman.h" >&5
-+echo $ECHO_N "checking for sys/mman.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_mman_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_mman_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_mman_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking sys/mman.h usability" >&5
-+echo $ECHO_N "checking sys/mman.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <sys/mman.h>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking sys/mman.h presence" >&5
-+echo $ECHO_N "checking sys/mman.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/mman.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/mman.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/mman.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/mman.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/mman.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/mman.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/mman.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/mman.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/mman.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/mman.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for sys/mman.h" >&5
-+echo $ECHO_N "checking for sys/mman.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_mman_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_mman_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_mman_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_mman_h" >&6
-
--for ac_hdr in unistd.h
--do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:1342: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1347 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
- fi
--rm -f conftest*
-+if test $ac_cv_header_sys_mman_h = yes; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: \"sys/mman.h not found\"" >&5
-+echo "$as_me: error: \"sys/mman.h not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+
-+
-+
-+for ac_header in unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ eval "$as_ac_Header=\$ac_header_preproc"
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
- done
-
-
--for ac_func in strcspn strdup strerror strspn strtol
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_func in strcspn strdup strerror strspn strtol mmap strcasecmp \
-+ strncasecmp strtol
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:1382: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1387 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef $ac_func
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:1410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-+
-+else
-+ { { echo "$as_me:$LINENO: error: \"Required function not found\"" >&5
-+echo "$as_me: error: \"Required function not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
--rm -f conftest*
-+done
-+
-+
-+
-+
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ echo "$as_me:$LINENO: checking how many arguments gethostbyname_r() takes" >&5
-+echo $ECHO_N "checking how many arguments gethostbyname_r() takes... $ECHO_C" >&6
-+
-+ if test "${ac_cv_func_which_gethostbyname_r+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+
-+
-+ac_cv_func_which_gethostbyname_r=unknown
-+
-+#
-+# ONE ARGUMENT (sanity check)
-+#
-+
-+# This should fail, as there is no variant of gethostbyname_r() that takes
-+# a single argument. If it actually compiles, then we can assume that
-+# netdb.h is not declaring the function, and the compiler is thereby
-+# assuming an implicit prototype. In which case, we're out of luck.
-+#
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <netdb.h>
-+int
-+main ()
-+{
-+
-+ char *name = "www.gnu.org";
-+ (void)gethostbyname_r(name) /* ; */
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_which_gethostbyname_r=no
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+#
-+# SIX ARGUMENTS
-+# (e.g. Linux)
-+#
-+
-+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <netdb.h>
-+int
-+main ()
-+{
-+
-+ char *name = "www.gnu.org";
-+ struct hostent ret, *retp;
-+ char buf[1024];
-+ int buflen = 1024;
-+ int my_h_errno;
-+ (void)gethostbyname_r(name, &ret, buf, buflen, &retp, &my_h_errno) /* ; */
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_which_gethostbyname_r=six
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "Required function not found"" 1>&2; exit 1; }
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--done
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+
-+#
-+# FIVE ARGUMENTS
-+# (e.g. Solaris)
-+#
-+
-+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <netdb.h>
-+int
-+main ()
-+{
-+
-+ char *name = "www.gnu.org";
-+ struct hostent ret;
-+ char buf[1024];
-+ int buflen = 1024;
-+ int my_h_errno;
-+ (void)gethostbyname_r(name, &ret, buf, buflen, &my_h_errno) /* ; */
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_which_gethostbyname_r=five
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+
-+#
-+# THREE ARGUMENTS
-+# (e.g. AIX, HP-UX, Tru64)
-+#
-+
-+if test "$ac_cv_func_which_gethostbyname_r" = "unknown"; then
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <netdb.h>
-+int
-+main ()
-+{
-+
-+ char *name = "www.gnu.org";
-+ struct hostent ret;
-+ struct hostent_data data;
-+ (void)gethostbyname_r(name, &ret, &data) /* ; */
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_which_gethostbyname_r=three
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+
-+
-+
-+fi
-+
-+case "$ac_cv_func_which_gethostbyname_r" in
-+ three)
-+ echo "$as_me:$LINENO: result: three" >&5
-+echo "${ECHO_T}three" >&6
-+ cat >>confdefs.h <<\_ACEOF
-+#define HAVE_FUNC_GETHOSTBYNAME_R_3 1
-+_ACEOF
-+
-+ ;;
-+
-+ five)
-+ echo "$as_me:$LINENO: result: five" >&5
-+echo "${ECHO_T}five" >&6
-+ cat >>confdefs.h <<\_ACEOF
-+#define HAVE_FUNC_GETHOSTBYNAME_R_5 1
-+_ACEOF
-+
-+ ;;
-+
-+ six)
-+ echo "$as_me:$LINENO: result: six" >&5
-+echo "${ECHO_T}six" >&6
-+ cat >>confdefs.h <<\_ACEOF
-+#define HAVE_FUNC_GETHOSTBYNAME_R_6 1
-+_ACEOF
-+
-+ ;;
-+
-+ no)
-+ echo "$as_me:$LINENO: result: cannot find function declaration in netdb.h" >&5
-+echo "${ECHO_T}cannot find function declaration in netdb.h" >&6
-+ ;;
-+
-+ unknown)
-+ echo "$as_me:$LINENO: result: can't tell" >&5
-+echo "${ECHO_T}can't tell" >&6
-+ ;;
-+
-+ *)
-+ { { echo "$as_me:$LINENO: error: internal error" >&5
-+echo "$as_me: error: internal error" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+esac
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-
-
- OLDLIBS="${LIBS}"
- LIBS=
- CONNECTLIB=
- for LIB in c socket; do
-- echo $ac_n "checking for connect in -l"${LIB}"""... $ac_c" 1>&6
--echo "configure:1441: checking for connect in -l"${LIB}"" >&5
--ac_lib_var=`echo "${LIB}"'_'connect | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ as_ac_Lib=`echo "ac_cv_lib_"${LIB}"''_connect" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for connect in -l\"${LIB}\"" >&5
-+echo $ECHO_N "checking for connect in -l\"${LIB}\"... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Lib+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-l"${LIB}" $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1449 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char connect();
--
--int main() {
--connect()
--; return 0; }
--EOF
--if { (eval echo configure:1460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+ builtin and then its argument prototype would still apply. */
-+char connect ();
-+int
-+main ()
-+{
-+connect ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_Lib=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Lib=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Lib'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Lib'}'`" >&6
-+if test `eval echo '${'$as_ac_Lib'}'` = yes; then
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
--
- CONNECTLIB="${LIB}"
- break
--
--else
-- echo "$ac_t""no" 1>&6
-+
- fi
-
- done
- LIBS="${OLDLIBS} -l${CONNECTLIB}"
- if test "${CONNECTLIB}" = ""; then
-- { echo "configure: error: 'Could not find library containing connect()'" 1>&2; exit 1; }
--fi
-+ { { echo "$as_me:$LINENO: error: 'Could not find library containing connect()'" >&5
-+echo "$as_me: error: 'Could not find library containing connect()'" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+echo "$as_me:$LINENO: checking for socket" >&5
-+echo $ECHO_N "checking for socket... $ECHO_C" >&6
-+if test "${ac_cv_func_socket+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define socket to an innocuous variant, in case <limits.h> declares socket.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define socket innocuous_socket
-
--echo $ac_n "checking for socket""... $ac_c" 1>&6
--echo "configure:1490: checking for socket" >&5
--if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1495 "configure"
--#include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char socket(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char socket();
-+ which can conflict with char socket (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef socket
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char socket ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_socket) || defined (__stub___socket)
- choke me
- #else
--socket();
-+char (*f) () = socket;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:1518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_socket=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_socket=no"
--fi
--rm -f conftest*
--fi
--
--if eval "test \"`echo '$ac_cv_func_'socket`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+int
-+main ()
-+{
-+return f != socket;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_socket=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_socket=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_socket" >&5
-+echo "${ECHO_T}$ac_cv_func_socket" >&6
-+if test $ac_cv_func_socket = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
-
-- echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
--echo "configure:1537: checking for socket in -lsocket" >&5
--ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+echo "$as_me:$LINENO: checking for socket in -lsocket" >&5
-+echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6
-+if test "${ac_cv_lib_socket_socket+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lsocket $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1545 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char socket();
--
--int main() {
--socket()
--; return 0; }
--EOF
--if { (eval echo configure:1556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_lib 1
--EOF
-+ builtin and then its argument prototype would still apply. */
-+char socket ();
-+int
-+main ()
-+{
-+socket ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_socket_socket=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_socket_socket=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5
-+echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6
-+if test $ac_cv_lib_socket_socket = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_LIBSOCKET 1
-+_ACEOF
-
- LIBS="-lsocket $LIBS"
-
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "socket function not found"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"socket function not found\"" >&5
-+echo "$as_me: error: \"socket function not found\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- fi
-
-
--echo $ac_n "checking for inet_aton""... $ac_c" 1>&6
--echo "configure:1588: checking for inet_aton" >&5
--if eval "test \"`echo '$''{'ac_cv_func_inet_aton'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for inet_aton" >&5
-+echo $ECHO_N "checking for inet_aton... $ECHO_C" >&6
-+if test "${ac_cv_func_inet_aton+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1593 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define inet_aton to an innocuous variant, in case <limits.h> declares inet_aton.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define inet_aton innocuous_inet_aton
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char inet_aton(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char inet_aton();
-+ which can conflict with char inet_aton (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef inet_aton
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char inet_aton ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_inet_aton) || defined (__stub___inet_aton)
- choke me
- #else
--inet_aton();
-+char (*f) () = inet_aton;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:1616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_inet_aton=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_inet_aton=no"
--fi
--rm -f conftest*
--fi
--
--if eval "test \"`echo '$ac_cv_func_'inet_aton`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+int
-+main ()
-+{
-+return f != inet_aton;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_inet_aton=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_inet_aton=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_inet_aton" >&5
-+echo "${ECHO_T}$ac_cv_func_inet_aton" >&6
-+if test $ac_cv_func_inet_aton = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_INET_ATON 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
-
-- echo $ac_n "checking for inet_addr""... $ac_c" 1>&6
--echo "configure:1638: checking for inet_addr" >&5
--if eval "test \"`echo '$''{'ac_cv_func_inet_addr'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1643 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking for inet_addr" >&5
-+echo $ECHO_N "checking for inet_addr... $ECHO_C" >&6
-+if test "${ac_cv_func_inet_addr+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define inet_addr to an innocuous variant, in case <limits.h> declares inet_addr.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define inet_addr innocuous_inet_addr
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char inet_addr(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char inet_addr();
-+ which can conflict with char inet_addr (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef inet_addr
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char inet_addr ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_inet_addr) || defined (__stub___inet_addr)
- choke me
- #else
--inet_addr();
-+char (*f) () = inet_addr;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:1666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_inet_addr=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_inet_addr=no"
--fi
--rm -f conftest*
--fi
--
--if eval "test \"`echo '$ac_cv_func_'inet_addr`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+int
-+main ()
-+{
-+return f != inet_addr;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_inet_addr=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_inet_addr=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_inet_addr" >&5
-+echo "${ECHO_T}$ac_cv_func_inet_addr" >&6
-+if test $ac_cv_func_inet_addr = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_INET_ADDR 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
-
-- echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
--echo "configure:1688: checking for inet_addr in -lnsl" >&5
--ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for inet_addr in -lnsl" >&5
-+echo $ECHO_N "checking for inet_addr in -lnsl... $ECHO_C" >&6
-+if test "${ac_cv_lib_nsl_inet_addr+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
--LIBS="-lnsl $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1696 "configure"
--#include "confdefs.h"
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char inet_addr();
--
--int main() {
--inet_addr()
--; return 0; }
--EOF
--if { (eval echo configure:1707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lnsl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char inet_addr ();
-+int
-+main ()
-+{
-+inet_addr ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_nsl_inet_addr=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_nsl_inet_addr=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_inet_addr" >&5
-+echo "${ECHO_T}$ac_cv_lib_nsl_inet_addr" >&6
-+if test $ac_cv_lib_nsl_inet_addr = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_INET_ADDR 1
--EOF
-+_ACEOF
-
-- LIBS="${LIBS} -lnsl"
-+ LIBS="${LIBS} -lnsl"
- else
-- echo "$ac_t""no" 1>&6
-
-- { echo "configure: error: "Neither inet_aton or inet_addr present"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"Neither inet_aton or inet_addr present\"" >&5
-+echo "$as_me: error: \"Neither inet_aton or inet_addr present\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- fi
-
- fi
-
-
--echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
--echo "configure:1739: checking for gethostbyname" >&5
--if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for gethostbyname" >&5
-+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
-+if test "${ac_cv_func_gethostbyname+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1744 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define gethostbyname innocuous_gethostbyname
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char gethostbyname(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char gethostbyname();
-+ which can conflict with char gethostbyname (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef gethostbyname
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char gethostbyname ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
- choke me
- #else
--gethostbyname();
-+char (*f) () = gethostbyname;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:1767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_gethostbyname=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_gethostbyname=no"
--fi
--rm -f conftest*
--fi
--
--if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+int
-+main ()
-+{
-+return f != gethostbyname;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_gethostbyname=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_gethostbyname=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
-+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6
-+if test $ac_cv_func_gethostbyname = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_GETHOSTBYNAME 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
-
-- echo $ac_n "checking for gethostbyname in -lxnet""... $ac_c" 1>&6
--echo "configure:1789: checking for gethostbyname in -lxnet" >&5
--ac_lib_var=`echo xnet'_'gethostbyname | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for gethostbyname in -lxnet" >&5
-+echo $ECHO_N "checking for gethostbyname in -lxnet... $ECHO_C" >&6
-+if test "${ac_cv_lib_xnet_gethostbyname+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lxnet $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1797 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char gethostbyname();
--
--int main() {
--gethostbyname()
--; return 0; }
--EOF
--if { (eval echo configure:1808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+ builtin and then its argument prototype would still apply. */
-+char gethostbyname ();
-+int
-+main ()
-+{
-+gethostbyname ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_xnet_gethostbyname=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_xnet_gethostbyname=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_gethostbyname" >&5
-+echo "${ECHO_T}$ac_cv_lib_xnet_gethostbyname" >&6
-+if test $ac_cv_lib_xnet_gethostbyname = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_GETHOSTBYNAME 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
-
-- { echo "configure: error: "gethostbyname not found, name lookups in " \
-- "tsocks and inspectsocks disabled"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"gethostbyname not found, name lookups in \" \
-+ \"tsocks and inspectsocks disabled\"" >&5
-+echo "$as_me: error: \"gethostbyname not found, name lookups in \" \
-+ \"tsocks and inspectsocks disabled\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- fi
-
-
- SIMPLELIBS=${LIBS}
- LIBS=
-
--echo $ac_n "checking for dlsym in -ldl""... $ac_c" 1>&6
--echo "configure:1841: checking for dlsym in -ldl" >&5
--ac_lib_var=`echo dl'_'dlsym | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+echo "$as_me:$LINENO: checking for dlsym in -ldl" >&5
-+echo $ECHO_N "checking for dlsym in -ldl... $ECHO_C" >&6
-+if test "${ac_cv_lib_dl_dlsym+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldl $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1849 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dlsym();
--
--int main() {
--dlsym()
--; return 0; }
--EOF
--if { (eval echo configure:1860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_lib=HAVE_LIB`echo dl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_lib 1
--EOF
-+ builtin and then its argument prototype would still apply. */
-+char dlsym ();
-+int
-+main ()
-+{
-+dlsym ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dl_dlsym=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dl_dlsym=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlsym" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlsym" >&6
-+if test $ac_cv_lib_dl_dlsym = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_LIBDL 1
-+_ACEOF
-
- LIBS="-ldl $LIBS"
-
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: "libdl is required"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"libdl is required\"" >&5
-+echo "$as_me: error: \"libdl is required\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-
--echo $ac_n "checking "for RTLD_NEXT from dlfcn.h"""... $ac_c" 1>&6
--echo "configure:1890: checking "for RTLD_NEXT from dlfcn.h"" >&5
--cat > conftest.$ac_ext <<EOF
--#line 1892 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for RTLD_NEXT from dlfcn.h" >&5
-+echo $ECHO_N "checking for RTLD_NEXT from dlfcn.h... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <dlfcn.h>
- #ifdef RTLD_NEXT
- yes
- #endif
-
--EOF
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "yes" >/dev/null 2>&1; then
-- rm -rf conftest*
--
-- echo "$ac_t""yes" 1>&6
-+ $EGREP "yes" >/dev/null 2>&1; then
-+
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-
- else
-- rm -rf conftest*
--
-- echo "$ac_t""no" 1>&6
-- echo $ac_n "checking "for RTLD_NEXT from dlfcn.h with _GNU_SOURCE"""... $ac_c" 1>&6
--echo "configure:1912: checking "for RTLD_NEXT from dlfcn.h with _GNU_SOURCE"" >&5
-- cat > conftest.$ac_ext <<EOF
--#line 1914 "configure"
--#include "confdefs.h"
-+
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+ echo "$as_me:$LINENO: checking for RTLD_NEXT from dlfcn.h with _GNU_SOURCE" >&5
-+echo $ECHO_N "checking for RTLD_NEXT from dlfcn.h with _GNU_SOURCE... $ECHO_C" >&6
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #define _GNU_SOURCE
- #include <dlfcn.h>
- #ifdef RTLD_NEXT
- yes
- #endif
--
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "yes" >/dev/null 2>&1; then
-- rm -rf conftest*
--
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+ $EGREP "yes" >/dev/null 2>&1; then
-+
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+ cat >>confdefs.h <<\_ACEOF
- #define USE_GNU_SOURCE 1
--EOF
-+_ACEOF
-+
-
--
- else
-- rm -rf conftest*
--
-- echo "$ac_t""no" 1>&6
-- cat >> confdefs.h <<\EOF
-+
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+ cat >>confdefs.h <<\_ACEOF
- #define USE_OLD_DLSYM 1
--EOF
-+_ACEOF
-
- oldmethod="yes"
--
-+
- fi
- rm -f conftest*
--
-+
-
- fi
- rm -f conftest*
-
-
- if test "${enable_socksdns}" = "yes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define USE_SOCKS_DNS 1
--EOF
-+_ACEOF
-+
-+fi
-
-+echo "$as_me:$LINENO: checking whether to enable tordns" >&5
-+echo $ECHO_N "checking whether to enable tordns... $ECHO_C" >&6
-+if test "x${enable_tordns}" = "x"; then
-+ cat >>confdefs.h <<\_ACEOF
-+#define USE_TOR_DNS 1
-+_ACEOF
-+
-+ DEADPOOL_O="\${DEADPOOL}.o"
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+else
-+ DEADPOOL_O=""
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-+
- if test "x${enable_envconf}" = "x"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define ALLOW_ENV_CONFIG 1
--EOF
-+_ACEOF
-
- fi
-
- if test "${enable_oldmethod}" = "yes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define USE_OLD_DLSYM 1
--EOF
-+_ACEOF
-
- oldmethod="yes"
- fi
-
- if test "x${enable_debug}" = "x"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define ALLOW_MSG_OUTPUT 1
--EOF
-+_ACEOF
-
- fi
-
--if test "x${enable_hostnames}" = "x"; then
-- cat >> confdefs.h <<\EOF
-+if test "x${enable_hostnames}" = "xyes"; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HOSTNAMES 1
--EOF
-+_ACEOF
-
- fi
-
- if test "${enable_socksdns}" = "yes" -a \
-- "x${enable_hostnames}" = "x" ; then
-- { echo "configure: error: "--enable-socksdns is not valid without --disable-hostnames"" 1>&2; exit 1; }
-+ "x${enable_hostnames}" = "xyes" ; then
-+ { { echo "$as_me:$LINENO: error: \"--enable-socksdns is not valid with --enable-hostnames\"" >&5
-+echo "$as_me: error: \"--enable-socksdns is not valid with --enable-hostnames\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+if test "x${enable_tordns}" = "x" -a \
-+ "x${enable_hostnames}" = "xyes" ; then
-+ { { echo "$as_me:$LINENO: error: \"--enable-tordns is not valid with --enable-hostnames\"" >&5
-+echo "$as_me: error: \"--enable-tordns is not valid with --enable-hostnames\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
--if test "${oldmethod}" = "yes"; then
--
-+if test "${oldmethod}" = "yes"; then
-+
- # Extract the first word of "find", so it can be a program name with args.
- set dummy find; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1998: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_FIND'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_FIND+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$FIND"; then
- ac_cv_prog_FIND="$FIND" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_FIND="find"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_FIND="find"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--FIND="$ac_cv_prog_FIND"
-+FIND=$ac_cv_prog_FIND
- if test -n "$FIND"; then
-- echo "$ac_t""$FIND" 1>&6
-+ echo "$as_me:$LINENO: result: $FIND" >&5
-+echo "${ECHO_T}$FIND" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
- if test "${FIND}" = ""; then
-- { echo "configure: error: 'find not found in path'" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: 'find not found in path'" >&5
-+echo "$as_me: error: 'find not found in path'" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- # Extract the first word of "tail", so it can be a program name with args.
- set dummy tail; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2031: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_TAIL'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_TAIL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$TAIL"; then
- ac_cv_prog_TAIL="$TAIL" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_TAIL="tail"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_TAIL="tail"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--TAIL="$ac_cv_prog_TAIL"
-+TAIL=$ac_cv_prog_TAIL
- if test -n "$TAIL"; then
-- echo "$ac_t""$TAIL" 1>&6
-+ echo "$as_me:$LINENO: result: $TAIL" >&5
-+echo "${ECHO_T}$TAIL" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
- if test "${TAIL}" = ""; then
-- { echo "configure: error: 'tail not found in path'" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: 'tail not found in path'" >&5
-+echo "$as_me: error: 'tail not found in path'" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-- echo $ac_n "checking "location of lib${CONNECTLIB}.so"""... $ac_c" 1>&6
--echo "configure:2062: checking "location of lib${CONNECTLIB}.so"" >&5
-+ echo "$as_me:$LINENO: checking location of lib${CONNECTLIB}.so" >&5
-+echo $ECHO_N "checking location of lib${CONNECTLIB}.so... $ECHO_C" >&6
- LIBCONNECT=
- for DIR in '/lib' '/usr/lib'; do
- if test "${LIBCONNECT}" = ""; then
- LIBCONNECT=`$FIND $DIR -name "lib${CONNECTLIB}.so.?" 2>/dev/null | $TAIL -1`
- fi
- done
-
-- cat >> confdefs.h <<EOF
-+ cat >>confdefs.h <<_ACEOF
- #define LIBCONNECT "${LIBCONNECT}"
--EOF
-+_ACEOF
-
- if test "${LIBCONNECT}" = ""; then
-- { echo "configure: error: "not found!"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"not found!\"" >&5
-+echo "$as_me: error: \"not found!\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-- echo "$ac_t""$LIBCONNECT" 1>&6
-+ echo "$as_me:$LINENO: result: $LIBCONNECT" >&5
-+echo "${ECHO_T}$LIBCONNECT" >&6
-
-- echo $ac_n "checking "location of libc.so"""... $ac_c" 1>&6
--echo "configure:2081: checking "location of libc.so"" >&5
-+ echo "$as_me:$LINENO: checking location of libc.so" >&5
-+echo $ECHO_N "checking location of libc.so... $ECHO_C" >&6
- LIBC=
- for DIR in '/lib' '/usr/lib'; do
- if test "${LIBC}" = ""; then
- LIBC=`$FIND $DIR -name "libc.so.?" 2>/dev/null | $TAIL -1`
- fi
- done
-
-- cat >> confdefs.h <<EOF
-+ cat >>confdefs.h <<_ACEOF
- #define LIBC "${LIBC}"
--EOF
-+_ACEOF
-
- if test "${LIBC}" = ""; then
-- { echo "configure: error: "not found!"" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: \"not found!\"" >&5
-+echo "$as_me: error: \"not found!\"" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-- echo "$ac_t""$LIBC" 1>&6
-+ echo "$as_me:$LINENO: result: $LIBC" >&5
-+echo "${ECHO_T}$LIBC" >&6
- fi
-
--echo $ac_n "checking for correct select prototype""... $ac_c" 1>&6
--echo "configure:2101: checking for correct select prototype" >&5
-+echo "$as_me:$LINENO: checking for correct select prototype" >&5
-+echo $ECHO_N "checking for correct select prototype... $ECHO_C" >&6
- PROTO=
--for testproto in 'int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout'
-+for testproto in 'int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout'
- do
- if test "${PROTO}" = ""; then
-- cat > conftest.$ac_ext <<EOF
--#line 2107 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <sys/time.h>
- #include <sys/types.h>
- #include <unistd.h>
- int select($testproto);
--
--int main() {
-
--; return 0; }
--EOF
--if { (eval echo configure:2119: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- PROTO="$testproto";
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- done
- if test "${PROTO}" = ""; then
-- { echo "configure: error: "no match found!"" 1>&2; exit 1; }
--fi
--echo "$ac_t""select(${PROTO})" 1>&6
--cat >> confdefs.h <<EOF
-+ { { echo "$as_me:$LINENO: error: \"no match found!\"" >&5
-+echo "$as_me: error: \"no match found!\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+echo "$as_me:$LINENO: result: select(${PROTO})" >&5
-+echo "${ECHO_T}select(${PROTO})" >&6
-+cat >>confdefs.h <<_ACEOF
- #define SELECT_SIGNATURE ${PROTO}
--EOF
-+_ACEOF
-
-
--echo $ac_n "checking for correct connect prototype""... $ac_c" 1>&6
--echo "configure:2139: checking for correct connect prototype" >&5
-+echo "$as_me:$LINENO: checking for correct connect prototype" >&5
-+echo $ECHO_N "checking for correct connect prototype... $ECHO_C" >&6
- PROTO=
- PROTO1='int __fd, const struct sockaddr * __addr, int len'
- PROTO2='int __fd, const struct sockaddr_in * __addr, socklen_t __len'
- PROTO3='int __fd, struct sockaddr * __addr, int __len'
- PROTO4='int __fd, const struct sockaddr * __addr, socklen_t __len'
- for testproto in "${PROTO1}" \
- "${PROTO2}" \
- "${PROTO3}" \
-- "${PROTO4}"
-+ "${PROTO4}"
- do
- if test "${PROTO}" = ""; then
-- cat > conftest.$ac_ext <<EOF
--#line 2152 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <sys/socket.h>
- int connect($testproto);
--
--int main() {
-
--; return 0; }
--EOF
--if { (eval echo configure:2162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- PROTO="$testproto";
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- done
- if test "${PROTO}" = ""; then
-- { echo "configure: error: "no match found!"" 1>&2; exit 1; }
--fi
--echo "$ac_t""connect(${PROTO})" 1>&6
--cat >> confdefs.h <<EOF
-+ { { echo "$as_me:$LINENO: error: \"no match found!\"" >&5
-+echo "$as_me: error: \"no match found!\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+echo "$as_me:$LINENO: result: connect(${PROTO})" >&5
-+echo "${ECHO_T}connect(${PROTO})" >&6
-+cat >>confdefs.h <<_ACEOF
- #define CONNECT_SIGNATURE ${PROTO}
--EOF
-+_ACEOF
-
-
- SOCKETARG="struct sockaddr *"
- case "${PROTO}" in
- *sockaddr_in*)
- SOCKETARG="struct sockaddr_in *"
- ;;
- esac
--cat >> confdefs.h <<EOF
-+cat >>confdefs.h <<_ACEOF
- #define CONNECT_SOCKARG ${SOCKETARG}
--EOF
-+_ACEOF
-
-
--echo $ac_n "checking for correct close prototype""... $ac_c" 1>&6
--echo "configure:2193: checking for correct close prototype" >&5
-+echo "$as_me:$LINENO: checking for correct close prototype" >&5
-+echo $ECHO_N "checking for correct close prototype... $ECHO_C" >&6
- PROTO=
- PROTO1='int fd'
--for testproto in "${PROTO1}"
-+for testproto in "${PROTO1}"
- do
- if test "${PROTO}" = ""; then
-- cat > conftest.$ac_ext <<EOF
--#line 2200 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <stdlib.h>
- int close($testproto);
--
--int main() {
-
--; return 0; }
--EOF
--if { (eval echo configure:2210: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- PROTO="$testproto";
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- done
- if test "${PROTO}" = ""; then
-- { echo "configure: error: "no match found!"" 1>&2; exit 1; }
--fi
--echo "$ac_t""close(${PROTO})" 1>&6
--cat >> confdefs.h <<EOF
-+ { { echo "$as_me:$LINENO: error: \"no match found!\"" >&5
-+echo "$as_me: error: \"no match found!\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+echo "$as_me:$LINENO: result: close(${PROTO})" >&5
-+echo "${ECHO_T}close(${PROTO})" >&6
-+cat >>confdefs.h <<_ACEOF
- #define CLOSE_SIGNATURE ${PROTO}
--EOF
-+_ACEOF
-
-
--echo $ac_n "checking for correct poll prototype""... $ac_c" 1>&6
--echo "configure:2230: checking for correct poll prototype" >&5
-+echo "$as_me:$LINENO: checking for correct poll prototype" >&5
-+echo $ECHO_N "checking for correct poll prototype... $ECHO_C" >&6
- PROTO=
--for testproto in 'struct pollfd *ufds, unsigned long nfds, int timeout'
-+for testproto in 'struct pollfd *ufds, unsigned long nfds, int timeout'
- do
- if test "${PROTO}" = ""; then
-- cat > conftest.$ac_ext <<EOF
--#line 2236 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <sys/poll.h>
- int poll($testproto);
--
--int main() {
-
--; return 0; }
--EOF
--if { (eval echo configure:2246: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- PROTO="$testproto";
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- done
- if test "${PROTO}" = ""; then
-- { echo "configure: error: "no match found!"" 1>&2; exit 1; }
--fi
--echo "$ac_t""poll(${PROTO})" 1>&6
--cat >> confdefs.h <<EOF
-+ { { echo "$as_me:$LINENO: error: \"no match found!\"" >&5
-+echo "$as_me: error: \"no match found!\"" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+echo "$as_me:$LINENO: result: poll(${PROTO})" >&5
-+echo "${ECHO_T}poll(${PROTO})" >&6
-+cat >>confdefs.h <<_ACEOF
- #define POLL_SIGNATURE ${PROTO}
--EOF
-+_ACEOF
-+
-+
-+PROTO="const char *name"
-+cat >>confdefs.h <<_ACEOF
-+#define GETHOSTBYNAME_SIGNATURE ${PROTO}
-+_ACEOF
-+
-+
-+PROTO="const char *node, const char *service, void *hints, void *res"
-+cat >>confdefs.h <<_ACEOF
-+#define GETADDRINFO_SIGNATURE ${PROTO}
-+_ACEOF
-+
-+
-+PROTO="const char *name, int af, int flags, int *error_num"
-+cat >>confdefs.h <<_ACEOF
-+#define GETIPNODEBYNAME_SIGNATURE ${PROTO}
-+_ACEOF
-
-
- SPECIALLIBS=${LIBS}
-
- LIBS=${SIMPLELIBS}
-
--trap '' 1 2 15
--cat > confcache <<\EOF
-+ ac_config_files="$ac_config_files Makefile"
-+cat >confcache <<\_ACEOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
--# scripts and configure runs. It is not useful on other systems.
--# If it contains results you don't want to keep, you may remove or edit it.
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems. If it contains results you don't
-+# want to keep, you may remove or edit it.
- #
--# By default, configure uses ./config.cache as the cache file,
--# creating it if it does not exist already. You can give configure
--# the --cache-file=FILE option to use a different cache file; that is
--# what configure does when it calls configure scripts in
--# subdirectories, so they share the cache.
--# Giving --cache-file=/dev/null disables caching, for debugging configure.
--# config.status only pays attention to the cache file if you give it the
--# --recheck option to rerun configure.
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
- #
--EOF
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
- # So, don't put newlines in cache variables' values.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--(set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-- # `set' does not quote correctly, so add quotes (double-quote substitution
-- # turns \\\\ into \\, and sed turns \\ into \).
-- sed -n \
-- -e "s/'/'\\\\''/g" \
-- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-- ;;
-- *)
-- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-- ;;
-- esac >> confcache
--if cmp -s $cache_file confcache; then
-- :
--else
-+{
-+ (set) 2>&1 |
-+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes (double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ sed -n \
-+ "s/'/'\\\\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+ ;;
-+ *)
-+ # `set' quotes correctly as required by POSIX, so do not add quotes.
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+} |
-+ sed '
-+ t clear
-+ : clear
-+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+ t end
-+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ : end' >>confcache
-+if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
-- echo "updating cache $cache_file"
-- cat confcache > $cache_file
-+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
- fi
- rm -f confcache
-
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
- test "x$prefix" = xNONE && prefix=$ac_default_prefix
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# Any assignment to VPATH causes Sun make to only execute
--# the first set of double-colon rules, so remove it if not needed.
--# If there is a colon in the path, we need to keep it.
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
- if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/;
-+s/:*\${srcdir}:*/:/;
-+s/:*@srcdir@:*/:/;
-+s/^\([^=]*=[ ]*\):*/\1/;
-+s/:*$//;
-+s/^[^=]*=[ ]*$//;
-+}'
- fi
-
--trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
--
- DEFS=-DHAVE_CONFIG_H
-
--# Without the "./", some shells look in PATH for config.status.
--: ${CONFIG_STATUS=./config.status}
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-+ # 1. Remove the extension, and $U if already installed.
-+ ac_i=`echo "$ac_i" |
-+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-+ # 2. Add them.
-+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+done
-+LIBOBJS=$ac_libobjs
-
--echo creating $CONFIG_STATUS
--rm -f $CONFIG_STATUS
--cat > $CONFIG_STATUS <<EOF
--#! /bin/sh
--# Generated automatically by configure.
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
- # Run this file to recreate the current configuration.
--# This directory was configured as follows,
--# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--#
--# $0 $ac_configure_args
--#
- # Compiler output produced by configure, useful for debugging
--# configure, is in ./config.log if it exists.
-+# configure, is in config.log if it exists.
-
--ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
--for ac_option
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+DUALCASE=1; export DUALCASE # for MKS sh
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
- do
-- case "\$ac_option" in
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
-+ else
-+ as_ln_s='ln -s'
-+ fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+exec 6>&1
-+
-+# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling. Logging --version etc. is OK.
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+} >&5
-+cat >&5 <<_CSEOF
-+
-+This file was extended by $as_me, which was
-+generated by GNU Autoconf 2.59. Invocation command line was
-+
-+ CONFIG_FILES = $CONFIG_FILES
-+ CONFIG_HEADERS = $CONFIG_HEADERS
-+ CONFIG_LINKS = $CONFIG_LINKS
-+ CONFIG_COMMANDS = $CONFIG_COMMANDS
-+ $ $0 $@
-+
-+_CSEOF
-+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-+echo >&5
-+_ACEOF
-+
-+# Files that config.status was made for.
-+if test -n "$ac_config_files"; then
-+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_headers"; then
-+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_links"; then
-+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_commands"; then
-+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+ -h, --help print this help, then exit
-+ -V, --version print version number, then exit
-+ -q, --quiet do not print progress messages
-+ -d, --debug don't remove temporary files
-+ --recheck update $as_me by reconfiguring in the same conditions
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+ --header=FILE[:TEMPLATE]
-+ instantiate the configuration header FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration headers:
-+$config_headers
-+
-+Report bugs to <bug-autoconf at gnu.org>."
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+config.status
-+configured by $0, generated by GNU Autoconf 2.59,
-+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright (C) 2003 Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+srcdir=$srcdir
-+INSTALL="$INSTALL"
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value. By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+ case $1 in
-+ --*=*)
-+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
-+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_shift=:
-+ ;;
-+ -*)
-+ ac_option=$1
-+ ac_optarg=$2
-+ ac_shift=shift
-+ ;;
-+ *) # This is not an option, so the user has probably given explicit
-+ # arguments.
-+ ac_option=$1
-+ ac_need_defaults=false;;
-+ esac
-+
-+ case $ac_option in
-+ # Handling of the options.
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-- echo "$CONFIG_STATUS generated by autoconf version 2.13"
-- exit 0 ;;
-- -help | --help | --hel | --he | --h)
-- echo "\$ac_cs_usage"; exit 0 ;;
-- *) echo "\$ac_cs_usage"; exit 1 ;;
-+ ac_cs_recheck=: ;;
-+ --version | --vers* | -V )
-+ echo "$ac_cs_version"; exit 0 ;;
-+ --he | --h)
-+ # Conflict between --help and --header
-+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit 0 ;;
-+ --debug | --d* | -d )
-+ debug=: ;;
-+ --file | --fil | --fi | --f )
-+ $ac_shift
-+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ ac_need_defaults=false;;
-+ --header | --heade | --head | --hea )
-+ $ac_shift
-+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-+ ac_need_defaults=false;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+ ac_cs_silent=: ;;
-+
-+ # This is an error.
-+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; } ;;
-+
-+ *) ac_config_targets="$ac_config_targets $1" ;;
-+
- esac
-+ shift
- done
-
--ac_given_srcdir=$srcdir
--ac_given_INSTALL="$INSTALL"
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+ exec 6>/dev/null
-+ ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-+
-+_ACEOF
-+
-+
-+
-
--trap 'rm -fr `echo "Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
--EOF
--cat >> $CONFIG_STATUS <<EOF
--
--# Protect against being on the right side of a sed subst in config.status.
--sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
-- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
--$ac_vpsub
--$extrasub
--s%@SHELL@%$SHELL%g
--s%@CFLAGS@%$CFLAGS%g
--s%@CPPFLAGS@%$CPPFLAGS%g
--s%@CXXFLAGS@%$CXXFLAGS%g
--s%@FFLAGS@%$FFLAGS%g
--s%@DEFS@%$DEFS%g
--s%@LDFLAGS@%$LDFLAGS%g
--s%@LIBS@%$LIBS%g
--s%@exec_prefix@%$exec_prefix%g
--s%@prefix@%$prefix%g
--s%@program_transform_name@%$program_transform_name%g
--s%@bindir@%$bindir%g
--s%@sbindir@%$sbindir%g
--s%@libexecdir@%$libexecdir%g
--s%@datadir@%$datadir%g
--s%@sysconfdir@%$sysconfdir%g
--s%@sharedstatedir@%$sharedstatedir%g
--s%@localstatedir@%$localstatedir%g
--s%@libdir@%$libdir%g
--s%@includedir@%$includedir%g
--s%@oldincludedir@%$oldincludedir%g
--s%@infodir@%$infodir%g
--s%@mandir@%$mandir%g
--s%@host@%$host%g
--s%@host_alias@%$host_alias%g
--s%@host_cpu@%$host_cpu%g
--s%@host_vendor@%$host_vendor%g
--s%@host_os@%$host_os%g
--s%@CC@%$CC%g
--s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
--s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
--s%@INSTALL_DATA@%$INSTALL_DATA%g
--s%@LN_S@%$LN_S%g
--s%@CPP@%$CPP%g
--s%@FIND@%$FIND%g
--s%@TAIL@%$TAIL%g
--s%@SPECIALLIBS@%$SPECIALLIBS%g
-
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_config_target in $ac_config_targets
-+do
-+ case "$ac_config_target" in
-+ # Handling of arguments.
-+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-+
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used. Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-+fi
-+
-+# Have a temporary directory for convenience. Make it in the build tree
-+# simply because there is no reason to put it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Create a temporary directory, and hook for its removal unless debugging.
-+$debug ||
-+{
-+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=./confstat$$-$RANDOM
-+ (umask 077 && mkdir $tmp)
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in ." >&2
-+ { (exit 1); exit 1; }
-+}
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+
-+#
-+# CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "\$CONFIG_FILES"; then
-+ # Protect against being on the right side of a sed subst in config.status.
-+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-+s, at SHELL@,$SHELL,;t t
-+s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-+s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
-+s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-+s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-+s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
-+s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-+s, at exec_prefix@,$exec_prefix,;t t
-+s, at prefix@,$prefix,;t t
-+s, at program_transform_name@,$program_transform_name,;t t
-+s, at bindir@,$bindir,;t t
-+s, at sbindir@,$sbindir,;t t
-+s, at libexecdir@,$libexecdir,;t t
-+s, at datadir@,$datadir,;t t
-+s, at sysconfdir@,$sysconfdir,;t t
-+s, at sharedstatedir@,$sharedstatedir,;t t
-+s, at localstatedir@,$localstatedir,;t t
-+s, at libdir@,$libdir,;t t
-+s, at includedir@,$includedir,;t t
-+s, at oldincludedir@,$oldincludedir,;t t
-+s, at infodir@,$infodir,;t t
-+s, at mandir@,$mandir,;t t
-+s, at build_alias@,$build_alias,;t t
-+s, at host_alias@,$host_alias,;t t
-+s, at target_alias@,$target_alias,;t t
-+s, at DEFS@,$DEFS,;t t
-+s, at ECHO_C@,$ECHO_C,;t t
-+s, at ECHO_N@,$ECHO_N,;t t
-+s, at ECHO_T@,$ECHO_T,;t t
-+s, at LIBS@,$LIBS,;t t
-+s, at build@,$build,;t t
-+s, at build_cpu@,$build_cpu,;t t
-+s, at build_vendor@,$build_vendor,;t t
-+s, at build_os@,$build_os,;t t
-+s, at host@,$host,;t t
-+s, at host_cpu@,$host_cpu,;t t
-+s, at host_vendor@,$host_vendor,;t t
-+s, at host_os@,$host_os,;t t
-+s, at CC@,$CC,;t t
-+s, at CFLAGS@,$CFLAGS,;t t
-+s, at LDFLAGS@,$LDFLAGS,;t t
-+s, at CPPFLAGS@,$CPPFLAGS,;t t
-+s, at ac_ct_CC@,$ac_ct_CC,;t t
-+s, at EXEEXT@,$EXEEXT,;t t
-+s, at OBJEXT@,$OBJEXT,;t t
-+s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-+s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-+s, at INSTALL_DATA@,$INSTALL_DATA,;t t
-+s, at LN_S@,$LN_S,;t t
-+s, at CPP@,$CPP,;t t
-+s, at EGREP@,$EGREP,;t t
-+s, at DEADPOOL_O@,$DEADPOOL_O,;t t
-+s, at FIND@,$FIND,;t t
-+s, at TAIL@,$TAIL,;t t
-+s, at SPECIALLIBS@,$SPECIALLIBS,;t t
-+s, at LIBOBJS@,$LIBOBJS,;t t
-+s, at LTLIBOBJS@,$LTLIBOBJS,;t t
- CEOF
--EOF
-
--cat >> $CONFIG_STATUS <<\EOF
-+_ACEOF
-
--# Split the substitutions into bite-sized pieces for seds with
--# small command number limits, like on Digital OSF/1 and HP-UX.
--ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
--ac_file=1 # Number of current file.
--ac_beg=1 # First line for current file.
--ac_end=$ac_max_sed_cmds # Line after last line for current file.
--ac_more_lines=:
--ac_sed_cmds=""
--while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-- else
-- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-- fi
-- if test ! -s conftest.s$ac_file; then
-- ac_more_lines=false
-- rm -f conftest.s$ac_file
-- else
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f conftest.s$ac_file"
-+ cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Split the substitutions into bite-sized pieces for seds with
-+ # small command number limits, like on Digital OSF/1 and HP-UX.
-+ ac_max_sed_lines=48
-+ ac_sed_frag=1 # Number of current file.
-+ ac_beg=1 # First line for current file.
-+ ac_end=$ac_max_sed_lines # Line after last line for current file.
-+ ac_more_lines=:
-+ ac_sed_cmds=
-+ while $ac_more_lines; do
-+ if test $ac_beg -gt 1; then
-+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ else
-+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ fi
-+ if test ! -s $tmp/subs.frag; then
-+ ac_more_lines=false
- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-+ # The purpose of the label and of the branching condition is to
-+ # speed up the sed processing (if there are no `@' at all, there
-+ # is no need to browse any of the substitutions).
-+ # These are the two extra sed commands mentioned above.
-+ (echo ':t
-+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-+ else
-+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-+ fi
-+ ac_sed_frag=`expr $ac_sed_frag + 1`
-+ ac_beg=$ac_end
-+ ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
-- ac_file=`expr $ac_file + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_cmds`
-+ done
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds=cat
- fi
--done
--if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
--fi
--EOF
--
--cat >> $CONFIG_STATUS <<EOF
-+fi # test -n "$CONFIG_FILES"
-
--CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
- esac
-
-- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
--
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-- else
-- ac_dir_suffix= ac_dots=
-- fi
--
-- case "$ac_given_srcdir" in
-- .) srcdir=.
-- if test -z "$ac_dots"; then top_srcdir=.
-- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
- *) # Relative path.
-- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-- top_srcdir="$ac_dots$ac_given_srcdir" ;;
-- esac
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+
-+# Do not use `cd foo && pwd` to compute absolute paths, because
-+# the directories may not exist.
-+case `pwd` in
-+.) ac_abs_builddir="$ac_dir";;
-+*)
-+ case "$ac_dir" in
-+ .) ac_abs_builddir=`pwd`;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_builddir=${ac_top_builddir}.;;
-+*)
-+ case ${ac_top_builddir}. in
-+ .) ac_abs_top_builddir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_srcdir=$ac_srcdir;;
-+*)
-+ case $ac_srcdir in
-+ .) ac_abs_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_srcdir=$ac_top_srcdir;;
-+*)
-+ case $ac_top_srcdir in
-+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-+ esac;;
-+esac
-
-- case "$ac_given_INSTALL" in
-- [/$]*) INSTALL="$ac_given_INSTALL" ;;
-- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-- esac
-
-- echo creating "$ac_file"
-- rm -f "$ac_file"
-- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-- case "$ac_file" in
-- *Makefile*) ac_comsub="1i\\
--# $configure_input" ;;
-- *) ac_comsub= ;;
-+ case $INSTALL in
-+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- sed -e "$ac_comsub
--s%@configure_input@%$configure_input%g
--s%@srcdir@%$srcdir%g
--s%@top_srcdir@%$top_srcdir%g
--s%@INSTALL@%$INSTALL%g
--" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
--fi; done
--rm -f conftest.s*
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ configure_input=
-+ else
-+ configure_input="$ac_file. "
-+ fi
-+ configure_input=$configure_input"Generated from `echo $ac_file_in |
-+ sed 's,.*/,,'` by configure."
-+
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ echo "$f";;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo "$f"
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo "$srcdir/$f"
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+
-+ if test x"$ac_file" != x-; then
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ rm -f "$ac_file"
-+ fi
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s, at configure_input@,$configure_input,;t t
-+s, at srcdir@,$ac_srcdir,;t t
-+s, at abs_srcdir@,$ac_abs_srcdir,;t t
-+s, at top_srcdir@,$ac_top_srcdir,;t t
-+s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-+s, at builddir@,$ac_builddir,;t t
-+s, at abs_builddir@,$ac_abs_builddir,;t t
-+s, at top_builddir@,$ac_top_builddir,;t t
-+s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
-+s, at INSTALL@,$ac_INSTALL,;t t
-+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-+ rm -f $tmp/stdin
-+ if test x"$ac_file" != x-; then
-+ mv $tmp/out $ac_file
-+ else
-+ cat $tmp/out
-+ rm -f $tmp/out
-+ fi
-+
-+done
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+#
-+# CONFIG_HEADER section.
-+#
-
- # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
- # NAME is the cpp macro being defined and VALUE is the value it is being given.
- #
- # ac_d sets the value in "#define NAME VALUE" lines.
--ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
--ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
--ac_dC='\3'
--ac_dD='%g'
--# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
--ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_uB='\([ ]\)%\1#\2define\3'
-+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-+ac_dB='[ ].*$,\1#\2'
-+ac_dC=' '
-+ac_dD=',;t'
-+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-+ac_uB='$,\1#\2define\3'
- ac_uC=' '
--ac_uD='\4%g'
--# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
--ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_eB='$%\1#\2define\3'
--ac_eC=' '
--ac_eD='%g'
--
--if test "${CONFIG_HEADERS+set}" != set; then
--EOF
--cat >> $CONFIG_STATUS <<EOF
-- CONFIG_HEADERS="config.h"
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--fi
--for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-+ac_uD=',;t'
-+
-+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
- esac
-
-- echo creating $ac_file
-+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-
-- rm -f conftest.frag conftest.in conftest.out
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- cat $ac_file_inputs > conftest.in
--
--EOF
--
--# Transform confdefs.h into a sed script conftest.vals that substitutes
--# the proper values into config.h.in to produce config.h. And first:
--# Protect against being on the right side of a sed subst in config.status.
--# Protect against being in an unquoted here document in config.status.
--rm -f conftest.vals
--cat > conftest.hdr <<\EOF
--s/[\\&%]/\\&/g
--s%[\\$`]%\\&%g
--s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
--s%ac_d%ac_u%gp
--s%ac_u%ac_e%gp
--EOF
--sed -n -f conftest.hdr confdefs.h > conftest.vals
--rm -f conftest.hdr
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ # Do quote $f, to prevent DOS paths from being IFS'd.
-+ echo "$f";;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo "$f"
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo "$srcdir/$f"
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+ # Remove the trailing spaces.
-+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-+
-+_ACEOF
-+
-+# Transform confdefs.h into two sed scripts, `conftest.defines' and
-+# `conftest.undefs', that substitutes the proper values into
-+# config.h.in to produce config.h. The first handles `#define'
-+# templates, and the second `#undef' templates.
-+# And first: Protect against being on the right side of a sed subst in
-+# config.status. Protect against being in an unquoted here document
-+# in config.status.
-+rm -f conftest.defines conftest.undefs
-+# Using a here document instead of a string reduces the quoting nightmare.
-+# Putting comments in sed scripts is not portable.
-+#
-+# `end' is used to avoid that the second main sed command (meant for
-+# 0-ary CPP macros) applies to n-ary macro definitions.
-+# See the Autoconf documentation for `clear'.
-+cat >confdef2sed.sed <<\_ACEOF
-+s/[\\&,]/\\&/g
-+s,[\\$`],\\&,g
-+t clear
-+: clear
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-+t end
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-+: end
-+_ACEOF
-+# If some macros were called several times there might be several times
-+# the same #defines, which is useless. Nevertheless, we may not want to
-+# sort them, since we want the *last* AC-DEFINE to be honored.
-+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-+rm -f confdef2sed.sed
-
- # This sed command replaces #undef with comments. This is necessary, for
- # example, in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
--cat >> conftest.vals <<\EOF
--s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
--EOF
--
--# Break up conftest.vals because some shells have a limit on
--# the size of here documents, and old seds have small limits too.
--
-+cat >>conftest.undefs <<\_ACEOF
-+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-+_ACEOF
-+
-+# Break up conftest.defines because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-+echo ' :' >>$CONFIG_STATUS
- rm -f conftest.tail
--while :
-+while grep . conftest.defines >/dev/null
- do
-- ac_lines=`grep -c . conftest.vals`
-- # grep -c gives empty output for an empty file on some AIX systems.
-- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-- # Write a limited-size here document to conftest.frag.
-- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-+ # Write a limited-size here document to $tmp/defines.sed.
-+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#define' lines.
-+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--' >> $CONFIG_STATUS
-- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-- rm -f conftest.vals
-- mv conftest.tail conftest.vals
--done
--rm -f conftest.vals
--
--cat >> $CONFIG_STATUS <<\EOF
-- rm -f conftest.frag conftest.h
-- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
-- cat conftest.in >> conftest.h
-- rm -f conftest.in
-- if cmp -s $ac_file conftest.h 2>/dev/null; then
-- echo "$ac_file is unchanged"
-- rm -f conftest.h
-- else
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- fi
-- rm -f $ac_file
-- mv conftest.h $ac_file
-+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-+ rm -f conftest.defines
-+ mv conftest.tail conftest.defines
-+done
-+rm -f conftest.defines
-+echo ' fi # grep' >>$CONFIG_STATUS
-+echo >>$CONFIG_STATUS
-+
-+# Break up conftest.undefs because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-+rm -f conftest.tail
-+while grep . conftest.undefs >/dev/null
-+do
-+ # Write a limited-size here document to $tmp/undefs.sed.
-+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#undef'
-+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-+ echo 'CEOF
-+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-+ rm -f conftest.undefs
-+ mv conftest.tail conftest.undefs
-+done
-+rm -f conftest.undefs
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ echo "/* Generated by configure. */" >$tmp/config.h
-+ else
-+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
--fi; done
-+ cat $tmp/in >>$tmp/config.h
-+ rm -f $tmp/in
-+ if test x"$ac_file" != x-; then
-+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-+echo "$as_me: $ac_file is unchanged" >&6;}
-+ else
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+ rm -f $ac_file
-+ mv $tmp/config.h $ac_file
-+ fi
-+ else
-+ cat $tmp/config.h
-+ rm -f $tmp/config.h
-+ fi
-+done
-+_ACEOF
-
--EOF
--cat >> $CONFIG_STATUS <<\EOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-
--exit 0
--EOF
-+{ (exit 0); exit 0; }
-+_ACEOF
- chmod +x $CONFIG_STATUS
--rm -fr confdefs* $ac_clean_files
--test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded. So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status. When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+ ac_cs_success=:
-+ ac_config_status_args=
-+ test "$silent" = yes &&
-+ ac_config_status_args="$ac_config_status_args --quiet"
-+ exec 5>/dev/null
-+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+ exec 5>>config.log
-+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+ # would make configure fail if this is the last instruction.
-+ $ac_cs_success || { (exit 1); exit 1; }
-+fi
-
-diff -rN -U 5 tsocks-1.8/configure.in tsocks/configure.in
---- tsocks-1.8/configure.in 2002-07-16 10:51:03.000000000 +1200
-+++ tsocks/configure.in 2005-10-02 21:52:00.000000000 +1300
-@@ -11,17 +11,19 @@
- dnl /etc/ld.so.preload file
- test "$libdir" = "\${exec_prefix}/lib" && libdir="/lib"
-
- dnl Arguments we allow
- AC_ARG_ENABLE(socksdns,
--[ --enable-socksdns force dns lookups to use tcp ])
-+[ --enable-socksdns force dns lookups to use tcp ])
-+AC_ARG_ENABLE(tordns,
-+[ --disable-tordns don't override name lookup calls to use SOCKS ])
- AC_ARG_ENABLE(debug,
- [ --disable-debug disable ALL error messages from tsocks ])
- AC_ARG_ENABLE(oldmethod,
--[ --enable-oldmethod use the old method to override connect ])
-+[ --enable-oldmethod use the old method to override connect ])
- AC_ARG_ENABLE(hostnames,
--[ --disable-hostnames disable hostname lookups for socks servers ])
-+[ --enable-hostnames enable hostname lookups for socks servers ])
- AC_ARG_ENABLE(envconf,
- [ --disable-envconf do not allow TSOCKS_CONF_FILE to specify configuration file ])
- AC_ARG_WITH(conf,
- [ --with-conf=<file> location of configuration file (/etc/tsocks.conf default)],[
- if test "${withval}" = "yes" ; then
-@@ -43,11 +45,11 @@
- AC_PROG_CC
- AC_PROG_INSTALL
- AC_PROG_LN_S
-
- dnl Check if the C compiler accepts -Wall
--AC_MSG_CHECKING("if the C compiler accepts -Wall")
-+AC_MSG_CHECKING(if the C compiler accepts -Wall)
- OLDCFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -Wall"
- AC_TRY_COMPILE(,,AC_MSG_RESULT(yes),[
- CFLAGS="$OLDCFLAGS"
- AC_MSG_RESULT(no)])
-@@ -68,16 +70,23 @@
- AC_CHECK_HEADER(fcntl.h,,AC_MSG_ERROR("fcntl.h not found"))
-
- dnl Check for the poll header
- AC_CHECK_HEADER(sys/poll.h,,AC_MSG_ERROR("sys/poll.h not found"))
-
-+dnl Check for the mmap header
-+AC_CHECK_HEADER(sys/mman.h,,AC_MSG_ERROR("sys/mman.h not found"))
-+
- dnl Other headers we're interested in
- AC_CHECK_HEADERS(unistd.h)
-
- dnl Checks for library functions.
--AC_CHECK_FUNCS(strcspn strdup strerror strspn strtol,,[
-- AC_MSG_ERROR("Required function not found")])
-+AC_CHECK_FUNCS(strcspn strdup strerror strspn strtol mmap strcasecmp \
-+ strncasecmp strtol,,[AC_MSG_ERROR("Required function not found")])
-+
-+dnl Find which version of gethostbyname_r we should be using (actually this
-+dnl isn't used right now).
-+AX_FUNC_WHICH_GETHOSTBYNAME_R
-
- dnl First find the library that contains connect() (obviously
- dnl the most important library for us). Once we've found it
- dnl we chuck it on the end of LIBS, that lib may end up there
- dnl more than once (since we do our search with an empty libs
-@@ -123,22 +132,22 @@
- dnl Checks for libraries.
- dnl Replace `main' with a function in -ldl:
- AC_CHECK_LIB(dl, dlsym,,AC_MSG_ERROR("libdl is required"))
-
- dnl If we're using gcc here define _GNU_SOURCE
--AC_MSG_CHECKING("for RTLD_NEXT from dlfcn.h")
-+AC_MSG_CHECKING(for RTLD_NEXT from dlfcn.h)
- AC_EGREP_CPP(yes,
- [
- #include <dlfcn.h>
- #ifdef RTLD_NEXT
- yes
- #endif
- ], [
- AC_MSG_RESULT(yes)
- ], [
- AC_MSG_RESULT(no)
-- AC_MSG_CHECKING("for RTLD_NEXT from dlfcn.h with _GNU_SOURCE")
-+ AC_MSG_CHECKING(for RTLD_NEXT from dlfcn.h with _GNU_SOURCE)
- AC_EGREP_CPP(yes,
- [
- #define _GNU_SOURCE
- #include <dlfcn.h>
- #ifdef RTLD_NEXT
-@@ -156,10 +165,21 @@
-
- if test "${enable_socksdns}" = "yes"; then
- AC_DEFINE(USE_SOCKS_DNS)
- fi
-
-+AC_MSG_CHECKING(whether to enable tordns)
-+if test "x${enable_tordns}" = "x"; then
-+ AC_DEFINE(USE_TOR_DNS)
-+ DEADPOOL_O="\${DEADPOOL}.o"
-+ AC_MSG_RESULT(yes)
-+else
-+ DEADPOOL_O=""
-+ AC_MSG_RESULT(no)
-+fi
-+AC_SUBST(DEADPOOL_O)
-+
- if test "x${enable_envconf}" = "x"; then
- AC_DEFINE(ALLOW_ENV_CONFIG)
- fi
-
- if test "${enable_oldmethod}" = "yes"; then
-@@ -169,17 +189,22 @@
-
- if test "x${enable_debug}" = "x"; then
- AC_DEFINE(ALLOW_MSG_OUTPUT)
- fi
-
--if test "x${enable_hostnames}" = "x"; then
-+if test "x${enable_hostnames}" = "xyes"; then
- AC_DEFINE(HOSTNAMES)
- fi
-
- if test "${enable_socksdns}" = "yes" -a \
-- "x${enable_hostnames}" = "x" ; then
-- AC_MSG_ERROR("--enable-socksdns is not valid without --disable-hostnames")
-+ "x${enable_hostnames}" = "xyes" ; then
-+ AC_MSG_ERROR("--enable-socksdns is not valid with --enable-hostnames")
-+fi
-+
-+if test "x${enable_tordns}" = "x" -a \
-+ "x${enable_hostnames}" = "xyes" ; then
-+ AC_MSG_ERROR("--enable-tordns is not valid with --enable-hostnames")
- fi
-
- dnl If we have to use the old method of overriding connect (i.e no
- dnl RTLD_NEXT) we need to know the location of the library that
- dnl contains connect(), select(), poll() and close()
-@@ -201,11 +226,11 @@
- if test "${TAIL}" = ""; then
- AC_MSG_ERROR('tail not found in path')
- fi
-
- dnl Now find the library we need
-- AC_MSG_CHECKING("location of lib${CONNECTLIB}.so")
-+ AC_MSG_CHECKING(location of lib${CONNECTLIB}.so)
- LIBCONNECT=
- for DIR in '/lib' '/usr/lib'; do
- if test "${LIBCONNECT}" = ""; then
- LIBCONNECT=`$FIND $DIR -name "lib${CONNECTLIB}.so.?" 2>/dev/null | $TAIL -1`
- fi
-@@ -217,11 +242,11 @@
- fi
-
- AC_MSG_RESULT($LIBCONNECT)
-
- dnl close() should be in libc, find it
-- AC_MSG_CHECKING("location of libc.so")
-+ AC_MSG_CHECKING(location of libc.so)
- LIBC=
- for DIR in '/lib' '/usr/lib'; do
- if test "${LIBC}" = ""; then
- LIBC=`$FIND $DIR -name "libc.so.?" 2>/dev/null | $TAIL -1`
- fi
-@@ -325,10 +350,22 @@
- AC_MSG_ERROR("no match found!")
- fi
- AC_MSG_RESULT([poll(${PROTO})])
- AC_DEFINE_UNQUOTED(POLL_SIGNATURE, [${PROTO}])
-
-+dnl Emit signature for gethostbyname
-+PROTO="const char *name"
-+AC_DEFINE_UNQUOTED(GETHOSTBYNAME_SIGNATURE, [${PROTO}])
-+
-+dnl Emit signature for getaddrinfo
-+PROTO="const char *node, const char *service, void *hints, void *res"
-+AC_DEFINE_UNQUOTED(GETADDRINFO_SIGNATURE, [${PROTO}])
-+
-+dnl Emit signature for getipnodebyname
-+PROTO="const char *name, int af, int flags, int *error_num"
-+AC_DEFINE_UNQUOTED(GETIPNODEBYNAME_SIGNATURE, [${PROTO}])
-+
- dnl Output the special librarys (libdl etc needed for tsocks)
- SPECIALLIBS=${LIBS}
- AC_SUBST(SPECIALLIBS)
- LIBS=${SIMPLELIBS}
-
-diff -rN -U 5 tsocks-1.8/dead_pool.c tsocks/dead_pool.c
---- tsocks-1.8/dead_pool.c 1970-01-01 12:00:00.000000000 +1200
-+++ tsocks/dead_pool.c 2005-10-01 21:26:53.000000000 +1200
-@@ -0,0 +1,541 @@
-+#include <stdio.h>
-+#include <sys/socket.h>
-+#include <netinet/in.h>
-+#include <arpa/inet.h>
-+#include <netdb.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <sys/mman.h>
-+#include "common.h"
-+#include "dead_pool.h"
-+
-+int store_pool_entry(dead_pool *pool, char *hostname, struct in_addr *addr);
-+void get_next_dead_address(dead_pool *pool, uint32_t *result);
-+
-+static int
-+do_resolve(const char *hostname, uint32_t sockshost, uint16_t socksport,
-+ uint32_t *result_addr);
-+
-+/* Compares the last strlen(s2) characters of s1 with s2. Returns as for
-+ strcasecmp. */
-+static int
-+strcasecmpend(const char *s1, const char *s2)
-+{
-+ size_t n1 = strlen(s1), n2 = strlen(s2);
-+ if (n2>n1) /* then they can't be the same; figure out which is bigger */
-+ return strcasecmp(s1,s2);
-+ else
-+ return strncasecmp(s1+(n1-n2), s2, n2);
-+}
-+
-+dead_pool *
-+init_pool(int pool_size, struct in_addr deadrange_base,
-+ struct in_addr deadrange_mask, char *sockshost, uint16_t socksport)
-+{
-+ int i, deadrange_bits, deadrange_width, deadrange_size;
-+ struct in_addr socks_server;
-+ dead_pool *newpool = NULL;
-+
-+ /* Count bits in netmask and determine deadrange width. */
-+ deadrange_bits = count_netmask_bits(deadrange_mask.s_addr);
-+ if(deadrange_bits == -1) {
-+ show_msg(MSGERR, "init_pool: invalid netmask for deadrange\n");
-+ return NULL;
-+ }
-+ deadrange_width = 32 - deadrange_bits;
-+
-+ show_msg(MSGDEBUG, "deadrange width is %d bits\n", deadrange_width);
-+
-+ /* Now work out how many IPs are available in the deadrange and check
-+ that this number makes sense. If the deadpool is bigger than the
-+ deadrange we shrink the pool. */
-+
-+ for(i=0, deadrange_size = 1; i < deadrange_width; i++) {
-+ deadrange_size *= 2;
-+ }
-+
-+ if(deadrange_size < pool_size) {
-+ show_msg(MSGWARN, "tordns cache size was %d, but deadrange size is %d: "
-+ "shrinking pool size to %d entries\n", pool_size,
-+ deadrange_size, deadrange_size);
-+ pool_size = deadrange_size;
-+ }
-+ if(pool_size < 1) {
-+ show_msg(MSGERR, "tordns cache size is 0, disabling tordns\n");
-+ return NULL;
-+ }
-+
-+ /* Allocate space for the dead_pool structure */
-+ newpool = (dead_pool *) mmap(0, sizeof(dead_pool),
-+ PROT_READ | PROT_WRITE,
-+ MAP_SHARED | MAP_ANONYMOUS, -1, 0);
-+ if(!newpool) {
-+ show_msg(MSGERR, "init_pool: unable to mmap deadpool "
-+ "(tried to map %d bytes)\n", sizeof(dead_pool));
-+ return NULL;
-+ }
-+
-+ /* Initialize the dead_pool structure */
-+#ifdef HAVE_INET_ATON
-+ inet_aton(sockshost, &socks_server);
-+#elif defined(HAVE_INET_ADDR)
-+ socks_server.s_addr = inet_addr(sockshost);
-+#endif
-+ newpool->sockshost = ntohl(socks_server.s_addr);
-+ newpool->socksport = socksport;
-+ newpool->deadrange_base = ntohl(deadrange_base.s_addr);
-+ newpool->deadrange_mask = ntohl(deadrange_mask.s_addr);
-+ newpool->deadrange_size = deadrange_size;
-+ newpool->write_pos = 0;
-+ newpool->dead_pos = 0;
-+ newpool->n_entries = pool_size;
-+
-+ /* Allocate space for the entries */
-+ newpool->entries = (pool_ent *) mmap(0, newpool->n_entries * sizeof(pool_ent),
-+ PROT_READ | PROT_WRITE,
-+ MAP_SHARED | MAP_ANONYMOUS, -1, 0);
-+ if(!newpool->entries) {
-+ munmap((void *)newpool, sizeof(dead_pool));
-+ show_msg(MSGERR, "init_pool: unable to mmap deadpool entries "
-+ "(tried to map %d bytes)\n",
-+ newpool->n_entries * sizeof(pool_ent));
-+ return NULL;
-+ }
-+
-+ /* Initialize the entries */
-+ for(i=0; i < newpool->n_entries; i++) {
-+ newpool->entries[i].ip = -1;
-+ newpool->entries[i].name[0] = '\0';
-+ }
-+
-+ return newpool;
-+}
-+
-+int
-+is_dead_address(dead_pool *pool, uint32_t addr)
-+{
-+ uint32_t haddr = ntohl(addr);
-+ if(pool == NULL) {
-+ return 0;
-+ }
-+ return (pool->deadrange_base == (haddr & pool->deadrange_mask));
-+}
-+
-+void
-+get_next_dead_address(dead_pool *pool, uint32_t *result)
-+{
-+ *result = htonl(pool->deadrange_base + pool->dead_pos++);
-+ if(pool->dead_pos >= pool->deadrange_size) {
-+ pool->dead_pos = 0;
-+ }
-+}
-+
-+int
-+store_pool_entry(dead_pool *pool, char *hostname, struct in_addr *addr)
-+{
-+ int position = pool->write_pos;
-+ int oldpos;
-+ int rc;
-+ uint32_t intaddr;
-+
-+ show_msg(MSGDEBUG, "store_pool_entry: storing '%s'\n", hostname);
-+ show_msg(MSGDEBUG, "store_pool_entry: write pos is: %d\n", pool->write_pos);
-+
-+ /* Check to see if name already exists in pool */
-+ oldpos = search_pool_for_name(pool, hostname);
-+ if(oldpos != -1){
-+ show_msg(MSGDEBUG, "store_pool_entry: not storing (entry exists)\n");
-+ addr->s_addr = pool->entries[oldpos].ip;
-+ return oldpos;
-+ }
-+
-+ /* If this is a .onion host, then we return a bogus ip from our deadpool,
-+ otherwise we try to resolve it and store the 'real' IP */
-+ if(strcasecmpend(hostname, ".onion") == 0) {
-+ get_next_dead_address(pool, &pool->entries[position].ip);
-+ } else {
-+ rc = do_resolve(hostname, pool->sockshost, pool->socksport, &intaddr);
-+ if(rc != 0) {
-+ show_msg(MSGWARN, "failed to resolve: %s\n", hostname);
-+ return -1;
-+ }
-+ if(is_dead_address(pool, intaddr)) {
-+ show_msg(MSGERR, "resolved %s -> %d (deadpool address) IGNORED\n");
-+ return -1;
-+ }
-+ pool->entries[position].ip = intaddr;
-+ }
-+
-+ strncpy(pool->entries[position].name, hostname, 255);
-+ pool->entries[position].name[255] = '\0';
-+ pool->write_pos++;
-+ if(pool->write_pos >= pool->n_entries) {
-+ pool->write_pos = 0;
-+ }
-+ addr->s_addr = pool->entries[position].ip;
-+
-+ show_msg(MSGDEBUG, "store_pool_entry: stored entry in slot '%d'\n", position);
-+
-+ return position;
-+}
-+
-+int
-+search_pool_for_name(dead_pool *pool, const char *name)
-+{
-+ int i;
-+ for(i=0; i < pool->n_entries; i++){
-+ if(strcmp(name, pool->entries[i].name) == 0){
-+ return i;
-+ }
-+ }
-+ return -1;
-+}
-+
-+char *
-+get_pool_entry(dead_pool *pool, struct in_addr *addr)
-+{
-+ int i;
-+ uint32_t intaddr = addr->s_addr;
-+
-+ if(pool == NULL) {
-+ return NULL;
-+ }
-+
-+ show_msg(MSGDEBUG, "get_pool_entry: searching for: %s\n", inet_ntoa(*addr));
-+ for(i=0; i<pool->n_entries; i++) {
-+ if(intaddr == pool->entries[i].ip) {
-+ show_msg(MSGDEBUG, "get_pool_entry: found: %s\n", pool->entries[i].name);
-+ return pool->entries[i].name;
-+ }
-+ }
-+ show_msg(MSGDEBUG, "get_pool_entry: address not found\n");
-+
-+ return NULL;
-+}
-+
-+static int
-+build_socks4a_resolve_request(char **out,
-+ const char *username,
-+ const char *hostname)
-+{
-+ size_t len;
-+ uint16_t port = htons(0); /* port: 0. */
-+ uint32_t addr = htonl(0x00000001u); /* addr: 0.0.0.1 */
-+
-+ len = 8 + strlen(username) + 1 + strlen(hostname) + 1;
-+ *out = malloc(len);
-+ (*out)[0] = 4; /* SOCKS version 4 */
-+ (*out)[1] = '\xF0'; /* Command: resolve. */
-+
-+ memcpy((*out)+2, &port, sizeof(port));
-+ memcpy((*out)+4, &addr, sizeof(addr));
-+ strcpy((*out)+8, username);
-+ strcpy((*out)+8+strlen(username)+1, hostname);
-+
-+ return len;
-+}
-+
-+#define RESPONSE_LEN 8
-+
-+static int
-+parse_socks4a_resolve_response(const char *response, size_t len,
-+ uint32_t *addr_out)
-+{
-+ uint8_t status;
-+ uint16_t port;
-+
-+ if (len < RESPONSE_LEN) {
-+ show_msg(MSGWARN,"Truncated socks response.\n");
-+ return -1;
-+ }
-+ if (((uint8_t)response[0])!=0) { /* version: 0 */
-+ show_msg(MSGWARN,"Nonzero version in socks response: bad format.\n");
-+ return -1;
-+ }
-+ status = (uint8_t)response[1];
-+
-+ memcpy(&port, response+2, sizeof(port));
-+ if (port!=0) { /* port: 0 */
-+ show_msg(MSGWARN,"Nonzero port in socks response: bad format.\n");
-+ return -1;
-+ }
-+ if (status != 90) {
-+ show_msg(MSGWARN,"Bad status: socks request failed.\n");
-+ return -1;
-+ }
-+
-+ memcpy(addr_out, response+4, sizeof(*addr_out));
-+
-+ return 0;
-+}
-+
-+static int
-+do_resolve(const char *hostname, uint32_t sockshost, uint16_t socksport,
-+ uint32_t *result_addr)
-+{
-+ int s;
-+ struct sockaddr_in socksaddr;
-+ char *req, *cp;
-+ int r, len;
-+ char response_buf[RESPONSE_LEN];
-+
-+ show_msg(MSGDEBUG, "do_resolve: resolving %s\n", hostname);
-+
-+ s = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP);
-+ if (s<0) {
-+ show_msg(MSGWARN, "do_resolve: problem creating socket\n");
-+ return -1;
-+ }
-+
-+ memset(&socksaddr, 0, sizeof(socksaddr));
-+ socksaddr.sin_family = AF_INET;
-+ socksaddr.sin_port = htons(socksport);
-+ socksaddr.sin_addr.s_addr = htonl(sockshost);
-+ if (realconnect(s, (struct sockaddr*)&socksaddr, sizeof(socksaddr))) {
-+ show_msg(MSGWARN, "do_resolve: error connecting to SOCKS server\n");
-+ return -1;
-+ }
-+
-+ if ((len = build_socks4a_resolve_request(&req, "", hostname))<0) {
-+ show_msg(MSGWARN, "do_resolve: error generating SOCKS request\n");
-+ return -1;
-+ }
-+
-+ cp = req;
-+ while (len) {
-+ r = send(s, cp, len, 0);
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error sending SOCKS request\n");
-+ free(req);
-+ return -1;
-+ }
-+ len -= r;
-+ cp += r;
-+ }
-+ free(req);
-+
-+ len = 0;
-+ while (len < RESPONSE_LEN) {
-+ r = recv(s, response_buf+len, RESPONSE_LEN-len, 0);
-+ if (r==0) {
-+ show_msg(MSGWARN, "do_resolve: EOF while reading SOCKS response\n");
-+ return -1;
-+ }
-+ if (r<0) {
-+ show_msg(MSGWARN, "do_resolve: error reading SOCKS response\n");
-+ return -1;
-+ }
-+ len += r;
-+ }
-+
-+ realclose(s);
-+
-+ if (parse_socks4a_resolve_response(response_buf, RESPONSE_LEN, result_addr) < 0){
-+ show_msg(MSGWARN, "do_resolve: error parsing SOCKS response\n");
-+ return -1;
-+ }
-+
-+ show_msg(MSGDEBUG, "do_resolve: success\n");
-+
-+ return 0;
-+}
-+
-+struct hostent *
-+our_gethostbyname(dead_pool *pool, const char *name)
-+{
-+ int pos;
-+ static struct in_addr addr;
-+ static struct hostent he;
-+ static char *addrs[2];
-+
-+ show_msg(MSGDEBUG, "our_gethostbyname: '%s' requested\n", name);
-+
-+ pos = store_pool_entry(pool,(char *) name, &addr);
-+ if(pos == -1) {
-+ h_errno = HOST_NOT_FOUND;
-+ return NULL;
-+ }
-+
-+ addrs[0] = (char *)&addr;
-+ addrs[1] = NULL;
-+
-+ he.h_name = pool->entries[pos].name;
-+ he.h_aliases = NULL;
-+ he.h_length = 4;
-+ he.h_addrtype = AF_INET;
-+ he.h_addr_list = addrs;
-+
-+ show_msg(MSGDEBUG, "our_gethostbyname: resolved '%s' to: '%s'\n",
-+ name, inet_ntoa(*((struct in_addr *)he.h_addr)));
-+
-+ return &he;
-+}
-+
-+static struct hostent *
-+alloc_hostent(int af)
-+{
-+ struct hostent *he = NULL;
-+ char **addr_list = NULL;
-+ void *addr = NULL;
-+ char **aliases = NULL;
-+
-+ if(af != AF_INET && af != AF_INET6) {
-+ return NULL;
-+ }
-+
-+ /* Since the memory we allocate here will be free'd by freehostent and
-+ that function is opaque to us, it's likely that we'll leak a little
-+ bit of memory here. */
-+
-+ he = malloc(sizeof(struct hostent));
-+ addr_list = malloc(2 * sizeof(char *));
-+ if(af == AF_INET6) {
-+ addr = malloc(sizeof(struct in6_addr));
-+ } else {
-+ addr = malloc(sizeof(struct in_addr));
-+ }
-+ aliases = malloc(sizeof(char *));
-+
-+ if(he == NULL || addr_list == NULL || addr == NULL || aliases == NULL) {
-+ if(he)
-+ free(he);
-+ if(addr_list)
-+ free(addr_list);
-+ if(addr)
-+ free(addr);
-+ if(aliases)
-+ free(aliases);
-+ }
-+
-+ he->h_name = NULL;
-+ he->h_addr_list = addr_list;
-+ he->h_addr_list[0] = addr;
-+ he->h_addr_list[1] = NULL;
-+ he->h_aliases = aliases;
-+ he->h_aliases[0] = NULL;
-+ he->h_length = af == AF_INET ? 4 : 16;
-+ he->h_addrtype = af;
-+
-+ return he;
-+}
-+
-+/* On Linux, there's no freehostent() anymore; we might as well implement
-+ this ourselves. */
-+
-+static void
-+free_hostent(struct hostent *he)
-+{
-+ int i;
-+ if(he->h_name) {
-+ free(he->h_name);
-+ }
-+ if(he->h_aliases) {
-+ for(i=0; he->h_aliases[i] != NULL; i++) {
-+ free(he->h_aliases[i]);
-+ }
-+ free(he->h_aliases);
-+ }
-+ if(he->h_addr_list) {
-+ free(he->h_addr_list);
-+ }
-+ free(he);
-+}
-+
-+int
-+our_getaddrinfo(dead_pool *pool, const char *node, const char *service,
-+ void *hints, void *res)
-+{
-+ int pos;
-+ struct in_addr addr;
-+ char *ipstr;
-+ int ret;
-+
-+ /* If "node" looks like a dotted-decimal ip address, then just call
-+ the real getaddrinfo; otherwise we'll need to get an address from
-+ our pool. */
-+
-+ /* TODO: work out what to do with AF_INET6 requests */
-+
-+#ifdef HAVE_INET_ATON
-+ if(inet_aton(node, &addr) == 0) {
-+#elif defined(HAVE_INET_ADDR)
-+ /* If we're stuck with inet_addr, then getaddrinfo() won't work
-+ properly with 255.255.255.255 (= -1). There's not much we can
-+ do about this */
-+ in_addr_t is_valid;
-+ is_valid = inet_addr(node);
-+ if(is_valid == -1) {
-+#endif
-+ pos = store_pool_entry(pool, (char *) node, &addr);
-+ if(pos == -1) {
-+ return EAI_NONAME;
-+ } else {
-+ ipstr = strdup(inet_ntoa(addr));
-+ ret = realgetaddrinfo(ipstr, service, hints, res);
-+ free(ipstr);
-+ }
-+ } else {
-+ ret = realgetaddrinfo(node, service, hints, res);
-+ }
-+
-+ return ret;
-+}
-+
-+struct hostent *
-+our_getipnodebyname(dead_pool *pool, const char *name, int af, int flags,
-+ int *error_num)
-+{
-+ int pos;
-+ struct hostent *he = NULL;
-+ int want_4in6 = 0;
-+ char addr_convert_buf[80];
-+ struct in_addr pool_addr;
-+
-+ if(af == AF_INET6) {
-+ /* Caller has requested an AF_INET6 address, and is not prepared to
-+ accept IPv4-mapped IPV6 addresses. There's nothing we can do to
-+ service their request. */
-+ if((flags & AI_V4MAPPED) == 0) {
-+ show_msg(MSGWARN, "getipnodebyname: asked for V6 addresses only, "
-+ "but tsocks can't handle that\n");
-+ *error_num = NO_RECOVERY;
-+ return NULL;
-+ } else {
-+ want_4in6 = 1;
-+ }
-+ }
-+
-+ pos = store_pool_entry(pool, (char *)name, &pool_addr);
-+ if(pos == -1) {
-+ *error_num = HOST_NOT_FOUND;
-+ return NULL;
-+ }
-+
-+ he = alloc_hostent(af);
-+ if(he == NULL) {
-+ show_msg(MSGERR, "getipnodebyname: failed to allocate hostent\n");
-+ *error_num = NO_RECOVERY;
-+ return NULL;
-+ }
-+
-+ if(want_4in6) {
-+ /* Convert the ipv4 address in *addr to an IPv4 in IPv6 mapped
-+ address. TODO: inet_ntoa() is thread-safe on Solaris but might
-+ not be on other platforms. */
-+ strcpy(addr_convert_buf, "::FFFF:");
-+ strcpy(addr_convert_buf+7, inet_ntoa(pool_addr));
-+ if(inet_pton(AF_INET6, addr_convert_buf, he->h_addr_list[0]) != 1) {
-+ show_msg(MSGERR, "getipnodebyname: inet_pton() failed!\n");
-+ free_hostent(he);
-+ *error_num = NO_RECOVERY;
-+ return NULL;
-+ }
-+ } else {
-+ ((struct in_addr *) he->h_addr_list[0])->s_addr = pool_addr.s_addr;
-+ }
-+ he->h_name = strdup(name);
-+
-+ return he;
-+}
-+
-+
-diff -rN -U 5 tsocks-1.8/dead_pool.h tsocks/dead_pool.h
---- tsocks-1.8/dead_pool.h 1970-01-01 12:00:00.000000000 +1200
-+++ tsocks/dead_pool.h 2005-10-01 18:28:53.000000000 +1200
-@@ -0,0 +1,44 @@
-+#ifndef _DEAD_POOL_H
-+#define _DEAD_POOL_H
-+
-+#include <config.h>
-+
-+extern int (*realconnect)(CONNECT_SIGNATURE);
-+extern int (*realclose)(CLOSE_SIGNATURE);
-+extern int (*realgetaddrinfo)(GETADDRINFO_SIGNATURE);
-+
-+struct struct_pool_ent {
-+ unsigned int ip;
-+ char name[256];
-+};
-+
-+typedef struct struct_pool_ent pool_ent;
-+
-+struct struct_dead_pool {
-+ pool_ent *entries; /* Points to array of pool entries */
-+ int n_entries; /* Number of entries in the deadpool */
-+ unsigned int deadrange_base; /* Deadrange start IP in host byte order */
-+ unsigned int deadrange_mask; /* Deadrange netmask in host byte order */
-+ unsigned int deadrange_size; /* Number of IPs in the deadrange */
-+ unsigned int write_pos; /* Next position to use in the pool array */
-+ unsigned int dead_pos; /* Next 'unused' deadpool IP */
-+ uint32_t sockshost;
-+ uint16_t socksport;
-+ char pad[2];
-+};
-+
-+typedef struct struct_dead_pool dead_pool;
-+
-+dead_pool *init_pool(int deadpool_size, struct in_addr deadrange_base,
-+ struct in_addr deadrange_mask, char *sockshost, uint16_t socksport);
-+int is_dead_address(dead_pool *pool, uint32_t addr);
-+char *get_pool_entry(dead_pool *pool, struct in_addr *addr);
-+int search_pool_for_name(dead_pool *pool, const char *name);
-+struct hostent *our_gethostbyname(dead_pool *pool, const char *name);
-+int our_getaddrinfo(dead_pool *pool, const char *node, const char *service,
-+ void *hints, void *res);
-+struct hostent *our_getipnodebyname(dead_pool *pool, const char *name,
-+ int af, int flags, int *error_num);
-+
-+#endif /* _DEAD_POOL_H */
-+
-diff -rN -U 5 tsocks-1.8/INSTALL tsocks/INSTALL
---- tsocks-1.8/INSTALL 2002-05-18 14:12:30.000000000 +1200
-+++ tsocks/INSTALL 2005-10-02 15:49:59.000000000 +1300
-@@ -2,14 +2,19 @@
- -------------------------------
-
- 1. Unpack the archive (though if you're reading this you've already
- achieved that)
-
-- tar -zxvf tsocks-<version>.tar.gx
-+ tar -zxvf tsocks-<version>.tar.gz
-+ OR
-+ tar -jxvf tsocks-<version>.tar.bz
-
- 2. Run ./configure, options which might be of interest (and that are
- specific to tsocks include):
-+ --disable-tordns This option disables tordns, which causes
-+ names to be looked up in a way designed to
-+ work well with Tor.
- --enable-socksdns This option causes tsocks to intercept
- DNS lookups and attempt to force them
- to use TCP instead of UDP and thus
- be proxied through the socks server. This
- is not a very elegant thing to do and
-@@ -24,14 +29,14 @@
- address of the connect() method tsocks
- overrides, instead it loads a reference
- to the libc shared library and then uses
- dlsym(). Again this is not very elegant
- and shouldn't be required.
-- --disable-hostnames This disables DNS lookups on names
-+ --enable-hostnames This enables DNS lookups on names
- provided as socks servers in the config
-- file. This option is necessary
-- if socks dns is enabled since tsocks
-+ file. This option is not compatible with
-+ tordns or socks dns, since tsocks
- can't send a socks dns request to resolve
- the location of the socks server.
- --with-conf=<filename> You can specify the location of the tsocks
- configuration file using this option, it
- defaults to '/etc/tsocks.conf'
-diff -rN -U 5 tsocks-1.8/Makefile.in tsocks/Makefile.in
---- tsocks-1.8/Makefile.in 2002-03-16 23:12:40.000000000 +1300
-+++ tsocks/Makefile.in 2005-10-02 21:58:35.000000000 +1300
-@@ -17,15 +17,17 @@
- INSPECT = inspectsocks
- SAVE = saveme
- LIB_NAME = libtsocks
- COMMON = common
- PARSER = parser
-+DEADPOOL = dead_pool
- VALIDATECONF = validateconf
- SCRIPT = tsocks
- SHLIB_MAJOR = 1
- SHLIB_MINOR = 8
- SHLIB = ${LIB_NAME}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
-+DEADPOOL_O = @DEADPOOL_O@
-
- INSTALL = @INSTALL@
- INSTALL_DATA = @INSTALL_DATA@
- CFLAGS = @CFLAGS@
- INCLUDES = -I.
-@@ -47,12 +49,12 @@
- ${SHCC} ${CFLAGS} ${INCLUDES} -o ${INSPECT} ${INSPECT}.c ${COMMON}.o ${LIBS}
-
- ${SAVE}: ${SAVE}.c
- ${SHCC} ${CFLAGS} ${INCLUDES} -static -o ${SAVE} ${SAVE}.c
-
--${SHLIB}: ${OBJS} ${COMMON}.o ${PARSER}.o
-- ${SHCC} ${CFLAGS} ${INCLUDES} -nostdlib -shared -o ${SHLIB} ${OBJS} ${COMMON}.o ${PARSER}.o ${DYNLIB_FLAGS} ${SPECIALLIBS} ${LIBS}
-+${SHLIB}: ${OBJS} ${COMMON}.o ${PARSER}.o ${DEADPOOL_O}
-+ ${SHCC} ${CFLAGS} ${INCLUDES} -nostdlib -shared -o ${SHLIB} ${OBJS} ${COMMON}.o ${PARSER}.o ${DEADPOOL_O} ${DYNLIB_FLAGS} ${SPECIALLIBS} ${LIBS}
- ln -sf ${SHLIB} ${LIB_NAME}.so
-
- %.so: %.c
- ${SHCC} ${CFLAGS} ${INCLUDES} -c ${CC_SWITCHES} $< -o $@
-
-@@ -81,6 +83,9 @@
-
- clean:
- -rm -f *.so *.so.* *.o *~ ${TARGETS}
-
- distclean: clean
-- -rm -f config.cache config.log config.h Makefile
-+ -rm -f config.cache config.log config.h Makefile \
-+ aclocal.m4 config.status
-+ -rm -rf autom4te.cache
-+
-diff -rN -U 5 tsocks-1.8/parser.c tsocks/parser.c
---- tsocks-1.8/parser.c 2002-03-14 01:34:22.000000000 +1300
-+++ tsocks/parser.c 2005-10-01 21:56:10.000000000 +1200
-@@ -27,10 +27,13 @@
- static int handle_reaches(struct parsedfile *, int, char *);
- static int handle_server(struct parsedfile *, int, char *);
- static int handle_type(struct parsedfile *config, int, char *);
- static int handle_port(struct parsedfile *config, int, char *);
- static int handle_local(struct parsedfile *, int, char *);
-+static int handle_tordns_enabled(struct parsedfile *, int, char *);
-+static int handle_tordns_deadpool_range(struct parsedfile *, int, char *);
-+static int handle_tordns_cache_size(struct parsedfile *, int, char *);
- static int handle_defuser(struct parsedfile *, int, char *);
- static int handle_defpass(struct parsedfile *, int, char *);
- static int make_netent(char *value, struct netent **ent);
-
- int read_config (char *filename, struct parsedfile *config) {
-@@ -41,13 +44,17 @@
- struct serverent *server;
-
- /* Clear out the structure */
- memset(config, 0x0, sizeof(*config));
-
-- /* Initialization */
-+ /* Initialization */
- currentcontext = &(config->defaultserver);
-
-+ /* Tordns defaults */
-+ config->tordns_cache_size = 256;
-+ config->tordns_enabled = 1;
-+
- /* If a filename wasn't provided, use the default */
- if (filename == NULL) {
- strncpy(line, CONF_FILE, sizeof(line) - 1);
- /* Insure null termination */
- line[sizeof(line) - 1] = (char) 0;
-@@ -56,11 +63,11 @@
-
- /* Read the configuration file */
- if ((conf = fopen(filename, "r")) == NULL) {
- show_msg(MSGERR, "Could not open socks configuration file "
- "(%s), assuming all networks local\n", filename);
-- handle_local(config, 0, "0.0.0.0/0.0.0.0");
-+ handle_local(config, 0, "0.0.0.0/0.0.0.0");
- rc = 1; /* Severe errors reading configuration */
- }
- else {
- memset(&(config->defaultserver), 0x0, sizeof(config->defaultserver));
-
-@@ -82,13 +89,17 @@
- server = (config->paths);
- while (server != NULL) {
- check_server(server);
- server = server->next;
- }
--
- }
-
-+ /* Initialize tordns deadpool_range if not supplied */
-+ if(config->tordns_deadpool_range == NULL) {
-+ handle_tordns_deadpool_range(config, 0, "127.0.69.0/255.255.255.0");
-+ }
-+
- return(rc);
- }
-
- /* Check server entries (and establish defaults) */
- static int check_server(struct serverent *server) {
-@@ -150,11 +161,17 @@
- handle_defuser(config, lineno, words[2]);
- } else if (!strcmp(words[0], "default_pass")) {
- handle_defpass(config, lineno, words[2]);
- } else if (!strcmp(words[0], "local")) {
- handle_local(config, lineno, words[2]);
-- } else {
-+ } else if (!strcmp(words[0], "tordns_enable")) {
-+ handle_tordns_enabled(config, lineno, words[2]);
-+ } else if (!strcmp(words[0], "tordns_deadpool_range")) {
-+ handle_tordns_deadpool_range(config, lineno, words[2]);
-+ } else if (!strcmp(words[0], "tordns_cache_size")) {
-+ handle_tordns_cache_size(config, lineno, words[2]);
-+ } else {
- show_msg(MSGERR, "Invalid pair type (%s) specified "
- "on line %d in configuration file, "
- "\"%s\"\n", words[0], lineno,
- savedline);
- }
-@@ -416,10 +433,130 @@
- }
-
- return(0);
- }
-
-+static int handle_flag(char *value)
-+{
-+ if(!strcasecmp(value, "true") || !strcasecmp(value, "yes")
-+ || !strcmp(value, "1")) {
-+ return 1;
-+ } else if (!strcasecmp(value, "false") || !strcasecmp(value, "no")
-+ || !strcmp(value, "0")) {
-+ return 0;
-+ } else {
-+ return -1;
-+ }
-+}
-+
-+static int handle_tordns_enabled(struct parsedfile *config, int lineno,
-+ char *value)
-+{
-+ int val = handle_flag(value);
-+ if(val == -1) {
-+ show_msg(MSGERR, "Invalid value %s supplied for tordns_enabled at "
-+ "line %d in config file, IGNORED\n", value, lineno);
-+ } else {
-+ config->tordns_enabled = val;
-+ }
-+ return 0;
-+}
-+
-+static int handle_tordns_cache_size(struct parsedfile *config, int lineno,
-+ char *value)
-+{
-+ char *endptr;
-+ long size = strtol(value, &endptr, 10);
-+ if(*endptr != '\0') {
-+ show_msg(MSGERR, "Error parsing integer value for "
-+ "tordns_cache_size (%s), using default %d\n",
-+ value, config->tordns_cache_size);
-+ } else if(size < 128) {
-+ show_msg(MSGERR, "The value supplied for tordns_cache_size (%d) "
-+ "is too small (<128), using default %d\n", size,
-+ config->tordns_cache_size);
-+ } else if(size > 4096) {
-+ show_msg(MSGERR, "The value supplied for tordns_cache_range (%d) "
-+ "is too large (>4096), using default %d\n", size,
-+ config->tordns_cache_size);
-+ } else {
-+ config->tordns_cache_size = size;
-+ }
-+ return 0;
-+}
-+
-+static int handle_tordns_deadpool_range(struct parsedfile *config, int lineno,
-+ char *value)
-+{
-+ int rc;
-+ struct netent *ent;
-+
-+ if (config->tordns_deadpool_range != NULL) {
-+ show_msg(MSGERR, "Only one 'deadpool' entry permitted, found a "
-+ "second at line %d in configuration file.\n");
-+ return(0);
-+ }
-+
-+ if (currentcontext != &(config->defaultserver)) {
-+ show_msg(MSGERR, "Deadpool cannot be specified in path "
-+ "block at like %d in configuration file. "
-+ "(Path block started at line %d)\n",
-+ lineno, currentcontext->lineno);
-+ return(0);
-+ }
-+
-+ rc = make_netent(value, &ent);
-+ /* This is copied from handle_local and should probably be folded into
-+ a generic whinge() function or something */
-+ switch(rc) {
-+ case 1:
-+ show_msg(MSGERR, "The deadpool specification (%s) is not validly "
-+ "constructed on line %d in configuration "
-+ "file\n", value, lineno);
-+ return(0);
-+ break;
-+ case 2:
-+ show_msg(MSGERR, "IP for deadpool "
-+ "network specification (%s) is not valid on line "
-+ "%d in configuration file\n", value, lineno);
-+ return(0);
-+ break;
-+ case 3:
-+ show_msg(MSGERR, "SUBNET for "
-+ "deadpool network specification (%s) is not valid on "
-+ "line %d in configuration file\n", value,
-+ lineno);
-+ return(0);
-+ break;
-+ case 4:
-+ show_msg(MSGERR, "IP (%s) & ", inet_ntoa(ent->localip));
-+ show_msg(MSGERR, "SUBNET (%s) != IP on line %d in "
-+ "configuration file, ignored\n",
-+ inet_ntoa(ent->localnet), lineno);
-+ return(0);
-+ case 5:
-+ case 6:
-+ case 7:
-+ show_msg(MSGERR, "Port specification is invalid and "
-+ "not allowed in deadpool specification "
-+ "(%s) on line %d in configuration file\n",
-+ value, lineno);
-+ return(0);
-+ break;
-+ }
-+ if (ent->startport || ent->endport) {
-+ show_msg(MSGERR, "Port specification is "
-+ "not allowed in deadpool specification "
-+ "(%s) on line %d in configuration file\n",
-+ value, lineno);
-+ return(0);
-+ }
-+
-+ config->tordns_deadpool_range = ent;
-+ return 0;
-+}
-+
- static int handle_local(struct parsedfile *config, int lineno, char *value) {
- int rc;
- struct netent *ent;
-
- if (currentcontext != &(config->defaultserver)) {
-diff -rN -U 5 tsocks-1.8/parser.h tsocks/parser.h
---- tsocks-1.8/parser.h 2002-02-10 20:26:27.000000000 +1300
-+++ tsocks/parser.h 2005-10-01 18:40:35.000000000 +1200
-@@ -23,18 +23,22 @@
- struct netent {
- struct in_addr localip; /* Base IP of the network */
- struct in_addr localnet; /* Mask for the network */
- unsigned long startport; /* Range of ports for the */
- unsigned long endport; /* network */
-- struct netent *next; /* Pointer to next network entry */
-+ struct netent *next; /* Pointer to next network entry */
- };
-
- /* Structure representing a complete parsed file */
- struct parsedfile {
- struct netent *localnets;
- struct serverent defaultserver;
- struct serverent *paths;
-+ int tordns_enabled;
-+ int tordns_failopen;
-+ int tordns_cache_size;
-+ struct netent *tordns_deadpool_range;
- };
-
- /* Functions provided by parser module */
- int read_config(char *, struct parsedfile *);
- int is_local(struct parsedfile *, struct in_addr *);
-diff -rN -U 5 tsocks-1.8/README.TORDNS tsocks/README.TORDNS
---- tsocks-1.8/README.TORDNS 1970-01-01 12:00:00.000000000 +1200
-+++ tsocks/README.TORDNS 2005-10-02 15:47:16.000000000 +1300
-@@ -0,0 +1,187 @@
-+
-+TORDNS
-+======
-+
-+What is it?
-+-----------
-+
-+This patch modifies the tsocks library to use SOCKS for name resolution.
-+
-+
-+Why should I use it?
-+--------------------
-+
-+* It's easier.
-+
-+When using this patch you don't (always..) need to run 'tor-resolve' when
-+using 'torify' anymore. Also, 'torify' now works directly with SSH without
-+the need for connect scripts or other fiddling. [As long as SSH is not
-+installed suid root].
-+
-+* It allows you to use programs which are not SOCKS aware to connect to
-+.onion sites.
-+
-+For example, you can ssh directly to a .onion site, or use telnet / netcat
-+without hassle.
-+
-+
-+QUICK: what do I need to do to make it work?
-+--------------------------------------------
-+
-+Configuration instructions:
-+
-+1) Get the sources
-+
-+wget http://ftp1.sourceforge.net/tsocks/tsocks-1.8beta5.tar.gz
-+wget http://www.totalinfosecurity.com/patches/tor-tsocks/tordns-1.8b5.patch
-+
-+2) Unpack and apply the tsocks patch
-+
-+tar xzvf tsocks-1.8beta5.tar.gz
-+cd tsocks-1.8
-+patch -p1 < ../tordns-1.8b5.patch
-+
-+3) Configure, compile and install
-+
-+NOTE: The default 'configure' settings for tsocks have been changed by
-+this patch. The --disable-hostnames option (don't try to use DNS to look
-+up SOCKS servers) is now enabled by default. Also, tordns is enabled
-+by default.
-+
-+./configure
-+make
-+make install
-+
-+All the tordns config options have sane default values which you should
-+not need to change.
-+
-+
-+Why did I need to use 'tor-resolve' with 'torify' in the first place?
-+---------------------------------------------------------------------
-+
-+Because if you run "torify telnet bar.foo.com 31337", for example, then
-+you're leaking information about what sites you're visiting to DNS servers.
-+
-+The tor-resolve utility resolves names through tor using SOCKS, in a way
-+that shouldn't compromise your privacy.
-+
-+
-+What won't work with this?
-+--------------------------
-+
-+The 'tordns' feature for tsocks only works with applications using the
-+standard c library name lookup mechanisms.
-+
-+Some programs roll their own name lookup functions, for example, 'curl'
-+uses the 'adns' library, not the standard c library name lookup calls.
-+In this case, you'll still be leaking DNS requests.
-+
-+However, it seems that most programs which go to the trouble of implementing
-+asynchronous DNS requests or doing other tricky things have native SOCKS or
-+HTTP proxy support.
-+
-+Requests for reverse name lookups are not intercepted.
-+
-+Finally, the tsocks library is NOT thread-safe, with or without this patch.
-+You should not 'torify' multithreaded applications.
-+
-+
-+How does it work?
-+-----------------
-+
-+This patch adds interceptors for common name resolution calls to tsocks.
-+Specifically, the 'gethostbyname', 'getaddrinfo' and 'getipnodebyname' library
-+functions. (gethostbyname_r is not supported).
-+
-+When a call to one of these functions is intercepted, a SOCKS4A resolve
-+request is used to retrieve the relevant information, and the results are
-+cached.
-+
-+When the application calls 'connect', the cache is consulted and instead
-+of making a SOCKS5 request and supplying the IP address, we connect using
-+the name. This prevents those messages in the tor logs which look like:
-+
-+ Sep 23 10:12:20.901 [warn] fetch_from_buf_socks(): Your application (using s
-+ ocks5 on port 80) is giving Tor only an IP address. Applications that do DNS
-+ resolves themselves may leak information. Consider using Socks4A (e.g. via
-+ privoxy or socat) instead.
-+
-+There are special provisions for handling .onion sites. When a program asks
-+to resolve a name ending in '.onion', no name lookup is performed. A bogus IP
-+address is returned. The range of unused IP addresses to hand out is called the
-+"deadpool". This IP address doesn't mean anything in particular, and could be
-+considered a cookie associated with the name. When the application eventually
-+calls 'connect' with this bogus IP, the cache is consulted and the result is a
-+SOCKS5 request which includes the name of the .onion site.
-+
-+The default deadpool range is '127.0.69.0/255.255.255.0'. NOTE: if a resolve
-+request results in an IP from the deadpool range then the response is rejected,
-+and it appears to the application that the lookup failed.
-+
-+The lookup cache is kept in mmap'd memory and shared across fork() calls.
-+This is because some programs perform name lookups in a child process and
-+then invoke 'connect' in the parent as a kind of "poor man's async DNS".
-+
-+
-+Advanced configuration options
-+------------------------------
-+
-+The following options have been added to the tsocks configuration file:
-+
-+tordns_enable
-+
-+ The default value is 'true'. If you set it to 'false', tsocks should work
-+ just like it did without the tordns patch.
-+
-+
-+tordns_deadpool_range
-+
-+ The default value is '127.0.69.0/255.255.255.0'. This specifies what range
-+ of IP addresses will be handed to the application as "cookies" for .onion
-+ names. Of course, you should pick a block of addresses which you aren't
-+ going to ever need to actually connect to.
-+
-+
-+tordns_cache_size
-+
-+ This specifies the number of IP addresses looked up through socks to cache.
-+ The default value is 256. The default value is 256. Each entry consumes 260
-+ bytes of memory, so the default adds 66,560 bytes of overhead to each
-+ 'torified' process. NOTE: if the number of IP addresses in
-+ tordns_deadpool_range is less than the value specified for tordns_cache_size,
-+ then the cache will be shrunk to fit the deadpool range. This is to prevent
-+ duplicate deadpool addresses from ever appearing in the cache.
-+
-+
-+TODO
-+----
-+
-+* Think about how local names get resolved. Is it important? For example,
-+ if I 'telnet localhost' which using tordns, what should happen? Should
-+ we search through /etc/hosts ourselves or what?
-+
-+* What about the isc library calls like res_init and so on? How widely are
-+ they use? Does this present a more elegant way to implement this stuff?
-+
-+* Perhaps intercept res_query etc and try to do something appropriate.
-+
-+* It should be possible to make this thread-safe with --enable-threads.
-+
-+* validateconf needs to be updated to understand (and show information about)
-+ the tordns configuration options.
-+
-+* Perhaps intercept reverse name lookups?
-+
-+* In fact, one could modify tsocks further to play nicely with tor. For
-+ example, you could prevent nonlocal UDP traffic from being sent at all,
-+ and so on.
-+
-+
-+******************************************************
-+Questions or comments, please contact:
-+Blair Strang (bls at totalinfosecurity.com)
-+Caleb Anderson (caleb.anderson at totalinfosecurity.com)
-+Carl Purvis (carl.purvis at totalinfosecurity.com)
-+
-+Total Information Security Ltd.
-+http://www.totalinfosecurity.com/
-diff -rN -U 5 tsocks-1.8/tsocks.c tsocks/tsocks.c
---- tsocks-1.8/tsocks.c 2002-07-16 10:50:52.000000000 +1200
-+++ tsocks/tsocks.c 2005-10-01 22:01:48.000000000 +1200
-@@ -51,19 +51,26 @@
- #ifdef USE_SOCKS_DNS
- #include <resolv.h>
- #endif
- #include <parser.h>
- #include <tsocks.h>
-+#include "dead_pool.h"
-
- /* Global Declarations */
- #ifdef USE_SOCKS_DNS
- static int (*realresinit)(void);
- #endif
--static int (*realconnect)(CONNECT_SIGNATURE);
-+#ifdef USE_TOR_DNS
-+static dead_pool *pool = NULL;
-+static struct hostent *(*realgethostbyname)(GETHOSTBYNAME_SIGNATURE);
-+int (*realgetaddrinfo)(GETADDRINFO_SIGNATURE);
-+static struct hostent *(*realgetipnodebyname)(GETIPNODEBYNAME_SIGNATURE);
-+#endif
-+int (*realconnect)(CONNECT_SIGNATURE);
- static int (*realselect)(SELECT_SIGNATURE);
- static int (*realpoll)(POLL_SIGNATURE);
--static int (*realclose)(CLOSE_SIGNATURE);
-+int (*realclose)(CLOSE_SIGNATURE);
- static struct parsedfile *config;
- static struct connreq *requests = NULL;
- static int suid = 0;
- static char *conffile = NULL;
-
-@@ -74,10 +81,15 @@
- int poll(POLL_SIGNATURE);
- int close(CLOSE_SIGNATURE);
- #ifdef USE_SOCKS_DNS
- int res_init(void);
- #endif
-+#ifdef USE_TOR_DNS
-+struct hostent *gethostbyname(GETHOSTBYNAME_SIGNATURE);
-+int getaddrinfo(GETADDRINFO_SIGNATURE);
-+struct hostent *getipnodebyname(GETIPNODEBYNAME_SIGNATURE);
-+#endif
-
- /* Private Function Prototypes */
- static int get_config();
- static int get_environment();
- static int connect_server(struct connreq *conn);
-@@ -97,10 +109,14 @@
- static int recv_buffer(struct connreq *conn);
- static int read_socksv5_method(struct connreq *conn);
- static int read_socksv4_req(struct connreq *conn);
- static int read_socksv5_connect(struct connreq *conn);
- static int read_socksv5_auth(struct connreq *conn);
-+#ifdef USE_TOR_DNS
-+static int deadpool_init();
-+static int send_socksv4a_request(struct connreq *conn, const char *onion_host);
-+#endif
-
- void _init(void) {
- #ifdef USE_OLD_DLSYM
- void *lib;
- #endif
-@@ -118,24 +134,38 @@
- realpoll = dlsym(RTLD_NEXT, "poll");
- realclose = dlsym(RTLD_NEXT, "close");
- #ifdef USE_SOCKS_DNS
- realresinit = dlsym(RTLD_NEXT, "res_init");
- #endif
-+ #ifdef USE_TOR_DNS
-+ realgethostbyname = dlsym(RTLD_NEXT, "gethostbyname");
-+ realgetaddrinfo = dlsym(RTLD_NEXT, "getaddrinfo");
-+ realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
-+ #endif
- #else
- lib = dlopen(LIBCONNECT, RTLD_LAZY);
- realconnect = dlsym(lib, "connect");
- realselect = dlsym(lib, "select");
- realpoll = dlsym(lib, "poll");
- #ifdef USE_SOCKS_DNS
- realresinit = dlsym(lib, "res_init");
- #endif
-- dlclose(lib);
--
-+ #ifdef USE_TOR_DNS
-+ realgethostbyname = dlsym(lib, "gethostbyname");
-+ realgetaddrinfo = dlsym(lib, "getaddrinfo");
-+ realgetipnodebyname = dlsym(RTLD_NEXT, "getipnodebyname");
-+ #endif
-+ dlclose(lib);
- lib = dlopen(LIBC, RTLD_LAZY);
-- realclose = dlsym(lib, "close");
-+ realclose = dlsym(lib, "close");
- dlclose(lib);
- #endif
-+#ifdef USE_TOR_DNS
-+ /* Unfortunately, we can't do this lazily because otherwise our mmap'd
-+ area won't be shared across fork()s. */
-+ deadpool_init();
-+#endif
- }
-
- static int get_environment() {
- static int done = 0;
- int loglevel = MSGERR;
-@@ -181,12 +211,11 @@
- if (config->paths)
- show_msg(MSGDEBUG, "First lineno for first path is %d\n", config->paths->lineno);
-
- done = 1;
-
-- return(0);
--
-+ return(0);
- }
-
- int connect(CONNECT_SIGNATURE) {
- struct sockaddr_in *connaddr;
- struct sockaddr_in peer_address;
-@@ -271,16 +300,21 @@
- if (!getpeername(__fd, (struct sockaddr *) &peer_address, &namelen)) {
- show_msg(MSGDEBUG, "Socket is already connected, defering to "
- "real connect\n");
- return(realconnect(__fd, __addr, __len));
- }
--
-+
- show_msg(MSGDEBUG, "Got connection request for socket %d to "
- "%s\n", __fd, inet_ntoa(connaddr->sin_addr));
-
- /* If the address is local call realconnect */
-+#ifdef USE_TOR_DNS
-+ if (!(is_local(config, &(connaddr->sin_addr))) &&
-+ !is_dead_address(pool, connaddr->sin_addr.s_addr)) {
-+#else
- if (!(is_local(config, &(connaddr->sin_addr)))) {
-+#endif
- show_msg(MSGDEBUG, "Connection for socket %d is local\n", __fd);
- return(realconnect(__fd, __addr, __len));
- }
-
- /* Ok, so its not local, we need a path to the net */
-@@ -869,19 +903,74 @@
- return((rc ? errno : 0));
- }
-
- static int send_socks_request(struct connreq *conn) {
- int rc = 0;
--
-- if (conn->path->type == 4)
-- rc = send_socksv4_request(conn);
-- else
-- rc = send_socksv5_method(conn);
-
-+#ifdef USE_TOR_DNS
-+ if (conn->path->type == 4) {
-+ char *name = get_pool_entry(pool, &(conn->connaddr.sin_addr));
-+ if(name != NULL) {
-+ rc = send_socksv4a_request(conn,name);
-+ } else {
-+ rc = send_socksv4_request(conn);
-+ }
-+#else
-+ if (conn->path->type == 4) {
-+ rc = send_socksv4_request(conn);
-+#endif
-+ } else {
-+ rc = send_socksv5_method(conn);
-+ }
- return(rc);
- }
-
-+#ifdef USE_TOR_DNS
-+static int send_socksv4a_request(struct connreq *conn,const char *onion_host)
-+{
-+ struct passwd *user;
-+ struct sockreq *thisreq;
-+ int endOfUser;
-+ /* Determine the current username */
-+ user = getpwuid(getuid());
-+
-+ thisreq = (struct sockreq *) conn->buffer;
-+ endOfUser=sizeof(struct sockreq) +
-+ (user == NULL ? 0 : strlen(user->pw_name)) + 1;
-+
-+ /* Check the buffer has enough space for the request */
-+ /* and the user name */
-+ conn->datalen = endOfUser+
-+ (onion_host == NULL ? 0 : strlen(onion_host)) + 1;
-+ if (sizeof(conn->buffer) < conn->datalen) {
-+ show_msg(MSGERR, "The SOCKS username is too long");
-+ conn->state = FAILED;
-+ return(ECONNREFUSED);
-+ }
-+
-+ /* Create the request */
-+ thisreq->version = 4;
-+ thisreq->command = 1;
-+ thisreq->dstport = conn->connaddr.sin_port;
-+ thisreq->dstip = htonl(1);
-+
-+ /* Copy the username */
-+ strcpy((char *) thisreq + sizeof(struct sockreq),
-+ (user == NULL ? "" : user->pw_name));
-+
-+ /* Copy the onion host */
-+ strcpy((char *) thisreq + endOfUser,
-+ (onion_host == NULL ? "" : onion_host));
-+
-+ conn->datadone = 0;
-+ conn->state = SENDING;
-+ conn->nextstate = SENTV4REQ;
-+
-+ return(0);
-+}
-+#endif /* USE_TOR_DNS */
-+
- static int send_socksv4_request(struct connreq *conn) {
- struct passwd *user;
- struct sockreq *thisreq;
-
- /* Determine the current username */
-@@ -931,10 +1020,14 @@
-
- return(0);
- }
-
- static int send_socksv5_connect(struct connreq *conn) {
-+#ifdef USE_TOR_DNS
-+ int namelen = 0;
-+ char *name = NULL;
-+#endif
- char constring[] = { 0x05, /* Version 5 SOCKS */
- 0x01, /* Connect request */
- 0x00, /* Reserved */
- 0x01 }; /* IP Version 4 */
-
-@@ -942,14 +1035,42 @@
- conn->datadone = 0;
- conn->state = SENDING;
- conn->nextstate = SENTV5CONNECT;
- memcpy(conn->buffer, constring, sizeof(constring));
- conn->datalen = sizeof(constring);
-- memcpy(&conn->buffer[conn->datalen], &(conn->connaddr.sin_addr.s_addr),
-- sizeof(conn->connaddr.sin_addr.s_addr));
-- conn->datalen += sizeof(conn->connaddr.sin_addr.s_addr);
-- memcpy(&conn->buffer[conn->datalen], &(conn->connaddr.sin_port), sizeof(conn->connaddr.sin_port));
-+
-+#ifdef USE_TOR_DNS
-+ show_msg(MSGDEBUG, "send_socksv5_connect: looking for: %s\n",
-+ inet_ntoa(conn->connaddr.sin_addr));
-+
-+ name = get_pool_entry(pool, &(conn->connaddr.sin_addr));
-+ if(name != NULL) {
-+ namelen = strlen(name);
-+ if(namelen > 255) { /* "Can't happen" */
-+ name = NULL;
-+ }
-+ }
-+ if(name != NULL) {
-+ show_msg(MSGDEBUG, "send_socksv5_connect: found it!\n");
-+ /* Substitute the domain name from the pool into the SOCKS request. */
-+ conn->buffer[3] = 0x03; /* Change the ATYP field */
-+ conn->buffer[4] = namelen; /* Length of name */
-+ conn->datalen++;
-+ memcpy(&conn->buffer[conn->datalen], name, namelen);
-+ conn->datalen += namelen;
-+ } else {
-+ show_msg(MSGDEBUG, "send_socksv5_connect: ip address not found\n");
-+#endif
-+ /* Use the raw IP address */
-+ memcpy(&conn->buffer[conn->datalen], &(conn->connaddr.sin_addr.s_addr),
-+ sizeof(conn->connaddr.sin_addr.s_addr));
-+ conn->datalen += sizeof(conn->connaddr.sin_addr.s_addr);
-+#ifdef USE_TOR_DNS
-+ }
-+#endif
-+ memcpy(&conn->buffer[conn->datalen], &(conn->connaddr.sin_port),
-+ sizeof(conn->connaddr.sin_port));
- conn->datalen += sizeof(conn->connaddr.sin_port);
-
- return(0);
- }
-
-@@ -1175,24 +1296,56 @@
-
- return(rc);
- }
- #endif
-
--#if 0
-- /* Get the flags of the socket, (incase its non blocking */
-- if ((sockflags = fcntl(sockid, F_GETFL)) == -1) {
-- sockflags = 0;
-- }
-+#ifdef USE_TOR_DNS
-+static int deadpool_init()
-+{
-+ if(!pool) {
-+ get_environment();
-+ get_config();
-+ if(config->tordns_enabled) {
-+ pool = init_pool(
-+ config->tordns_cache_size,
-+ config->tordns_deadpool_range->localip,
-+ config->tordns_deadpool_range->localnet,
-+ config->defaultserver.address,
-+ config->defaultserver.port
-+ );
-+ if(!pool) {
-+ show_msg(MSGERR, "failed to initialize deadpool: tordns disabled\n");
-+ }
-+ }
-+ }
-+ return 0;
-+}
-+
-+struct hostent *gethostbyname(GETHOSTBYNAME_SIGNATURE)
-+{
-+ if(pool) {
-+ return our_gethostbyname(pool, name);
-+ } else {
-+ return realgethostbyname(name);
-+ }
-+}
-+
-+int getaddrinfo(GETADDRINFO_SIGNATURE)
-+{
-+ if(pool) {
-+ return our_getaddrinfo(pool, node, service, hints, res);
-+ } else {
-+ return realgetaddrinfo(node, service, hints, res);
-+ }
-+}
-+
-+struct hostent *getipnodebyname(GETIPNODEBYNAME_SIGNATURE)
-+{
-+ if(pool) {
-+ return our_getipnodebyname(pool, name, af, flags, error_num);
-+ } else {
-+ return realgetipnodebyname(name, af, flags, error_num);
-+ }
-+}
-
-- /* If the flags show the socket as blocking, set it to */
-- /* blocking for our connection to the socks server */
-- if ((sockflags & O_NONBLOCK) != 0) {
-- fcntl(sockid, F_SETFL, sockflags & (~(O_NONBLOCK)));
-- }
- #endif
--#if 0
-- /* If the socket was in non blocking mode, restore that */
-- if ((sockflags & O_NONBLOCK) != 0) {
-- fcntl(sockid, F_SETFL, sockflags);
-- }
--#endif
-
-diff -rN -U 5 tsocks-1.8/tsocks.conf.5 tsocks/tsocks.conf.5
---- tsocks-1.8/tsocks.conf.5 2002-05-18 14:13:08.000000000 +1200
-+++ tsocks/tsocks.conf.5 2005-10-01 21:41:50.000000000 +1200
-@@ -124,10 +124,33 @@
- 150.0.0.0:80-1024/255.0.0.0" indicates to tsocks that the SOCKS server
- specified in the current path block should be used to access any IPs in the
- range 150.0.0.0 to 150.255.255.255 when the connection request is for ports
- 80-1024.
-
-+.TP
-+.I tordns_enable
-+This enables the use of the 'tordns' feature in tsocks, which overrides the
-+standard C library name resolution calls to use SOCKS. The default value is
-+'true'.
-+
-+.TP
-+.I tordns_deadpool_range
-+Tor hidden sites do not have real IP addresses. This specifies what range of
-+IP addresses will be handed to the application as "cookies" for .onion names.
-+Of course, you should pick a block of addresses which you aren't going to ever
-+need to actually connect to. The default value is '127.0.69.0/255.255.255.0'.
-+
-+.TP
-+.I tordns_cache_size
-+This specifies the number of IP addresses looked up through SOCKS to cache.
-+The default value is 256. Each entry consumes 260 bytes of memory, so the
-+default adds 66,560 bytes of overhead to each 'torified' process. NOTE: if
-+the number of IP addresses in tordns_deadpool_range is less than the value
-+specified for tordns_cache_size, then the cache will be shrunk to fit the
-+deadpool range. This is to prevent duplicate deadpool addresses from ever
-+appearing in the cache.
-+
- .SH UTILITIES
- tsocks comes with two utilities that can be useful in creating and verifying
- the tsocks configuration file.
-
- .TP
-diff -rN -U 5 tsocks-1.8/tsocks.h tsocks/tsocks.h
---- tsocks-1.8/tsocks.h 2002-03-14 01:58:09.000000000 +1300
-+++ tsocks/tsocks.h 2005-09-24 01:38:12.000000000 +1200
-@@ -50,11 +50,11 @@
- int selectevents;
-
- /* Buffer for sending and receiving on the socket */
- int datalen;
- int datadone;
-- char buffer[1024];
-+ char buffer[2048];
-
- struct connreq *next;
- };
-
- /* Connection statuses */
-diff -rN -U 5 tsocks-1.8/validateconf.c tsocks/validateconf.c
---- tsocks-1.8/validateconf.c 2002-02-07 23:49:59.000000000 +1300
-+++ tsocks/validateconf.c 2005-10-01 19:38:08.000000000 +1200
-@@ -161,11 +161,24 @@
- printf("\n");
- server = server->next;
- }
- }
-
-- return;
-+#ifdef USE_TOR_DNS
-+ /* Show tordns configuration options */
-+ printf("=== TorDNS Configuration Options ===\n");
-+ printf("Tor DNS enabled: %s\n",
-+ config->tordns_enabled ? "yes" : "no");
-+ printf("Tor DNS deadpool range: %s/",
-+ inet_ntoa(config->tordns_deadpool_range->localip));
-+ printf("%s\n",
-+ inet_ntoa(config->tordns_deadpool_range->localnet));
-+ printf("Tor DNS cache size: %d\n", config->tordns_cache_size);
-+ printf("\n");
-+#endif
-+
-+ return;
- }
-
- void show_server(struct parsedfile *config, struct serverent *server, int def) {
- struct in_addr res;
- struct netent *net;
diff --git a/doc/socks/SOCKS4.protocol b/doc/socks/SOCKS4.protocol
deleted file mode 100644
index 50fa5a7..0000000
--- a/doc/socks/SOCKS4.protocol
+++ /dev/null
@@ -1,150 +0,0 @@
- SOCKS: A protocol for TCP proxy across firewalls
-
- Ying-Da Lee
- yingda at best.com or yingda at esd.sgi.com
-
-SOCKS was originally developed by David Koblas and subsequently modified
-and extended by me to its current running version -- version 4. It is a
-protocol that relays TCP sessions at a firewall host to allow application
-users transparent access across the firewall. Because the protocol is
-independent of application protocols, it can be (and has been) used for
-many different services, such as telnet, ftp, finger, whois, gopher, WWW,
-etc. Access control can be applied at the beginning of each TCP session;
-thereafter the server simply relays the data between the client and the
-application server, incurring minimum processing overhead. Since SOCKS
-never has to know anything about the application protocol, it should also
-be easy for it to accommodate applications which use encryption to protect
-their traffic from nosey snoopers.
-
-Two operations are defined: CONNECT and BIND.
-
-1) CONNECT
-
-The client connects to the SOCKS server and sends a CONNECT request when
-it wants to establish a connection to an application server. The client
-includes in the request packet the IP address and the port number of the
-destination host, and userid, in the following format.
-
- +----+----+----+----+----+----+----+----+----+----+....+----+
- | VN | CD | DSTPORT | DSTIP | USERID |NULL|
- +----+----+----+----+----+----+----+----+----+----+....+----+
- # of bytes: 1 1 2 4 variable 1
-
-VN is the SOCKS protocol version number and should be 4. CD is the
-SOCKS command code and should be 1 for CONNECT request. NULL is a byte
-of all zero bits.
-
-The SOCKS server checks to see whether such a request should be granted
-based on any combination of source IP address, destination IP address,
-destination port number, the userid, and information it may obtain by
-consulting IDENT, cf. RFC 1413. If the request is granted, the SOCKS
-server makes a connection to the specified port of the destination host.
-A reply packet is sent to the client when this connection is established,
-or when the request is rejected or the operation fails.
-
- +----+----+----+----+----+----+----+----+
- | VN | CD | DSTPORT | DSTIP |
- +----+----+----+----+----+----+----+----+
- # of bytes: 1 1 2 4
-
-VN is the version of the reply code and should be 0. CD is the result
-code with one of the following values:
-
- 90: request granted
- 91: request rejected or failed
- 92: request rejected becasue SOCKS server cannot connect to
- identd on the client
- 93: request rejected because the client program and identd
- report different user-ids
-
-The remaining fields are ignored.
-
-The SOCKS server closes its connection immediately after notifying
-the client of a failed or rejected request. For a successful request,
-the SOCKS server gets ready to relay traffic on both directions. This
-enables the client to do I/O on its connection as if it were directly
-connected to the application server.
-
-
-2) BIND
-
-The client connects to the SOCKS server and sends a BIND request when
-it wants to prepare for an inbound connection from an application server.
-This should only happen after a primary connection to the application
-server has been established with a CONNECT. Typically, this is part of
-the sequence of actions:
-
--bind(): obtain a socket
--getsockname(): get the IP address and port number of the socket
--listen(): ready to accept call from the application server
--use the primary connection to inform the application server of
- the IP address and the port number that it should connect to.
--accept(): accept a connection from the application server
-
-The purpose of SOCKS BIND operation is to support such a sequence
-but using a socket on the SOCKS server rather than on the client.
-
-The client includes in the request packet the IP address of the
-application server, the destination port used in the primary connection,
-and the userid.
-
- +----+----+----+----+----+----+----+----+----+----+....+----+
- | VN | CD | DSTPORT | DSTIP | USERID |NULL|
- +----+----+----+----+----+----+----+----+----+----+....+----+
- # of bytes: 1 1 2 4 variable 1
-
-VN is again 4 for the SOCKS protocol version number. CD must be 2 to
-indicate BIND request.
-
-The SOCKS server uses the client information to decide whether the
-request is to be granted. The reply it sends back to the client has
-the same format as the reply for CONNECT request, i.e.,
-
- +----+----+----+----+----+----+----+----+
- | VN | CD | DSTPORT | DSTIP |
- +----+----+----+----+----+----+----+----+
- # of bytes: 1 1 2 4
-
-VN is the version of the reply code and should be 0. CD is the result
-code with one of the following values:
-
- 90: request granted
- 91: request rejected or failed
- 92: request rejected becasue SOCKS server cannot connect to
- identd on the client
- 93: request rejected because the client program and identd
- report different user-ids.
-
-However, for a granted request (CD is 90), the DSTPORT and DSTIP fields
-are meaningful. In that case, the SOCKS server obtains a socket to wait
-for an incoming connection and sends the port number and the IP address
-of that socket to the client in DSTPORT and DSTIP, respectively. If the
-DSTIP in the reply is 0 (the value of constant INADDR_ANY), then the
-client should replace it with the IP address of the SOCKS server to which
-the cleint is connected. (This happens if the SOCKS server is not a
-multi-homed host.) In the typical scenario, these two numbers are
-made available to the application client prgram via the result of the
-subsequent getsockname() call. The application protocol must provide a
-way for these two pieces of information to be sent from the client to
-the application server so that it can initiate the connection, which
-connects it to the SOCKS server rather than directly to the application
-client as it normally would.
-
-The SOCKS server sends a second reply packet to the client when the
-anticipated connection from the application server is established.
-The SOCKS server checks the IP address of the originating host against
-the value of DSTIP specified in the client's BIND request. If a mismatch
-is found, the CD field in the second reply is set to 91 and the SOCKS
-server closes both connections. If the two match, CD in the second
-reply is set to 90 and the SOCKS server gets ready to relay the traffic
-on its two connections. From then on the client does I/O on its connection
-to the SOCKS server as if it were directly connected to the application
-server.
-
-
-
-For both CONNECT and BIND operations, the server sets a time limit
-(2 minutes in current CSTC implementation) for the establishment of its
-connection with the application server. If the connection is still not
-establiched when the time limit expires, the server closes its connection
-to the client and gives up.
diff --git a/doc/tsocks.conf.complex.example b/doc/tsocks.conf.complex.example
deleted file mode 100644
index bdeea24..0000000
--- a/doc/tsocks.conf.complex.example
+++ /dev/null
@@ -1,47 +0,0 @@
-# This is the configuration for libtsocks (transparent socks)
-# Lines beginning with # and blank lines are ignored
-#
-# The basic idea is to specify:
-# - Local subnets - Networks that can be accessed directly without
-# assistance from a socks server
-# - Paths - Paths are basically lists of networks and a socks server
-# which can be used to reach these networks
-# - Default server - A socks server which should be used to access
-# networks for which no path is available
-# Much more documentation than provided in these comments can be found in
-# the man pages, tsocks(8) and tsocks.conf(8)
-
-# Local networks
-# For this example this machine can directly access 192.168.0.0/255.255.255.0
-# (192.168.0.*) and 10.0.0.0/255.0.0.0 (10.*)
-
-local = 192.168.0.0/255.255.255.0
-local = 10.0.0.0/255.0.0.0
-
-# Paths
-# For this example this machine needs to access 150.0.0.0/255.255.0.0 as
-# well as port 80 on the network 150.1.0.0/255.255.0.0 through
-# the socks 5 server at 10.1.7.25 (if this machines hostname was
-# "socks.hello.com" we could also specify that, unless --disable-hostnames
-# was specified to ./configure).
-
-path {
- reaches = 150.0.0.0/255.255.0.0
- reaches = 150.1.0.0:80/255.255.0.0
- server = 10.1.7.25
- server_type = 5
- default_user = delius
- default_pass = hello
-}
-
-# Default server
-# For connections that aren't to the local subnets or to 150.0.0.0/255.255.0.0
-# the server at 192.168.0.1 should be used (again, hostnames could be used
-# too, see note above)
-
-server = 192.168.0.1
-# Server type defaults to 4 so we need to specify it as 5 for this one
-server_type = 5
-# The port defaults to 1080 but I've stated it here for clarity
-server_port = 1080
-
diff --git a/doc/tsocks.conf.simple.example b/doc/tsocks.conf.simple.example
deleted file mode 100644
index bf2a695..0000000
--- a/doc/tsocks.conf.simple.example
+++ /dev/null
@@ -1,16 +0,0 @@
-# This is the configuration for libtsocks (transparent socks)
-# Lines beginning with # and blank lines are ignored
-#
-# This sample configuration shows the simplest (and most common) use of
-# tsocks. This is a basic LAN, this machine can access anything on the
-# local ethernet (192.168.0.*) but anything else has to use the SOCKS version
-# 4 server on the firewall. Further details can be found in the man pages,
-# tsocks(8) and tsocks.conf(5) and a more complex example is presented in
-# tsocks.conf.complex.example
-
-# We can access 192.168.0.* directly
-local = 192.168.0.0/255.255.255.0
-
-# Otherwise we use the server
-server = 192.168.0.1
-
diff --git a/doc/usewithtor.1 b/doc/usewithtor.1
deleted file mode 100644
index c7500cb..0000000
--- a/doc/usewithtor.1
+++ /dev/null
@@ -1,57 +0,0 @@
-.TH USEWITHTOR 1 "" "USEWITHTOR"
-
-.SH NAME
-.BR usewithtor
-\- Shell wrapper to simplify the use of the torsocks(8) library to
-transparently allow an application to use a SOCKS proxy.
-
-.SH SYNOPSIS
-.B usewithtor
-.RB [application\ [application's\ arguments]]
-.br
-.SH DESCRIPTION
-.B usewithtor
-is a wrapper between the torsocks library and the application what you
-would like to run socksified.
-
-.SH OPTIONS
-.IP \fB[application\ \fB[application's\ arguments]]
-run the application as specified with the environment (LD_PRELOAD) set
-such that torsocks(8) will transparently proxy SOCKS connections in
-that program.
-
-.SH USEWITHTOR VERSUS TORSOCKS
-.B usewithtor
-runs
-.B torsocks(1)
-with the default configuration file,
-located at
-.B @CONFDIR@/torsocks.conf.
-Running torsocks(1) directly means
-that no configuration file will be used (unless you manually set the
-TORSOCKS_CONF_FILE or TSOCKS_CONF_FILE environment variable), instead
-.B torsocks(8)
-will
-use defaults that are sensible for most Tor installations.
-
-.SH USEWITHTOR VERSUS TORIFY
-.B usewithtor(1)
-and
-.B torify(1)
-intend to achieve the same ends for most
-practical purposes. However
-.B torify(1)
-will use a default tsocks installation if one exists.
-.B Usewithtor(1)
-will only ever use a
-.B torsocks(8)
-installation.
-
-.SH SEE ALSO
-torsocks.conf(5)
-torsocks(1)
-usewithtor(1)
-
-.SH AUTHOR
-Robert Hogan (robert at roberthogan.net).This script is very similar to torify(1),
-provided by the Tor project.
\ No newline at end of file
More information about the tor-commits
mailing list